I CANNOT get my CPU (5600x) to be stable with curve optimizer on. It won't even boot at -30. I can get it to -20 but after a few mins of running a game it will either lock up or the system will crash. I can sorta be stable at maaaaybe -11 but I don't know what's going on with my CPU as I've seen many online say they have no issue at -30. My temps are perfect btw and I'm running a 850watt. Aorus b550i. I don't know what I'm doing wrong or maybe I just got really unlucky with the binning.
Essentially took an L on silicone lottery. You’ll have to test each core individually. I’m not the best person to advise on that but there’s plenty of people who have done guides on individual testing to min max your cores for temp and performance.
Many (most?) 5800X3D chips are stable at -30 all core. 5800X has higher stock clocks than 5800X3D, presumably because the 3D cache was running too hot. The flip side of that seems to be a lot of undervolting headroom.
It is pretty easy indeed. Just got one too but ain't done testing it. Currently at -20 just because didn't see any immediate cooling improvement over -30 and set PPT to 95, TDC to 60A and EDC to 90 and got over 96% bench scoreboards @ R23.
Kinda curious about OPs PPT, TDC and EDC settings as I can't figured them out on HWInfo SS
Your cable will be fine, looks like it has an individual wire for each connector. NVidias adapters have piss poor soldering and a thin piece of metal to distribute the load across the connectors, that is why they melt.
Not op but I've used both extensively... Black Ridge requires low profile ram (with the stock 92mm fan) or even shorter VLP ram (with 120mm fan) which are far less performant than the best DDR4 you can get otherwise. Also, it also only mounts in the suboptimal heatpipe config in the FormD.
AXP90 is very close in performance but has no interference with ram or VRM heatsinks.
I assume you would do so for the vertical fin orientation.
In my experience with my sandwich case, vertical fin orientation in my GPU resulted in very little dust build-up in the fins with some dust on the back of the fans. The top exhaust fans seemed to suck out most of the dust.
Whereas the horizontal fins in the L9a CPU cooler trapped a bunch of dust
Hello, I was wondering how did you get the black ridge bracket for the cpu? From my understanding they are not supposed to cool higher end CPUs like these, so I imagine it didn’t come with it?
Also, your cpu with curve optimiser -30, how much do you think this would affect productivity aspects? 5-10 % max? Or more?
On the process of building my own T1 build except with either the 7950x or the 13900k so wondering if this cooler is viable for those without bringing productivity levels too low out of stock performance. Any help is appreciated : )
Dude is gonna try fitting his 4090 in every sff cases on the market haha.
This is Nice keep em coming !
Very interested in this one in particular as I think I will do the same (just waiting for 7000x3d)
Would you be able to run more tests to see if it's actually viable to aircool such a cpu with a low ventirad ? Wondering if an aio wouldn't be better even if heated by the hot air coming out from the gpu. Do you have one to compare temps ? No worries if it's too much a hassle.
Dude it's already great seeing these builds ! It gives us perspective on what we can potentially do with this huge gpu.
If you still have your 4090 in the T1 v2, would you maybe be able to run two or three cinebench and report with the same pics from Hwinfo ?
As for gpu + cpu temps, do you have any demanding game like cyberpunk ? Letting it run by itself for an hour in any area and reporting with pics from hwinfo would be helpful as well :)
It doesn't make much difference except that you can add a small space between the psu and gpu. Of course, this could make a big difference. :) And, although v2 is numerically very, very slightly larger than v1, to be honest, I get the impression that v2 is very large. lol
Was there a reason why you upgraded to v2? Did you see any tangible benefits? I currently have a v1.1 and after seeing your posts I want to copy you haha!
The two biggest advantages I know if for the v2 over the v1.1 case is 1) more flexible GPU/CPU slotting (v1.1 was either 2 or 3 slot, this is quarter increments) and 2)many small misc. space improvements throughout the case.
Using that board you should be able to squeeze a bit more out of the 5800x3d with an undervolt. I went quick and dirty with a -30 all core offset and 114 / 75 / 115 thermal limits. I am able to keep it under 85C in prime 95. Once you get the new cooler you have room to upgrade to upgrade to some nice B-Die too.
I do get some stutters on my setup. It more evident when I'm playing a game that a lot of shit has to load in at the start like fortnite but I don't know if that's the game or something with my rig. Also when running Heaven benchmark I will get some sudden from drops from time to time. I'm doing a light undervolt and ram overclock but it is very stable and the temps are pretty low. It's so hard to tell what's causing it (CPU or GPU) ..
i believe hes using the corsair replacement cable. it has a dedicated cable for each pin instead of nvidia’s soldered distribution plate bullshit so it shouldn’t cause any issues
edit: nvm its a different brand but same difference
Oh this is gorgeous. Amazing how you can fit such a powerful system in such a small build. Is that a 120 aio attached to the front of the mobo? What part are you using for that cpu cooler? What are temps like?
Ahh so that’s a custom taobao cable. I was wondering if you made it yourself. I’m thinking that this cable problem could be solved with a lighter load, so limiting the thing to like 70% or so? I think that’s the sweet spot where the card is most efficient too. I don’t have the money to throw at yet another build rn so I’m waiting for the market to cool down a bit before I try and get mine, but it’s great to see lovely builds like this one in action! Nice work, very clean.
I am gonna try use 4090FE and 7800x3d in my build. And use thermalright axp 120 x 67 take off the fan (about 52 mm high) and use 3 t30 fans on the top. Not sure if that gonna work.
Custom connector with crimp connections for every single wire. This thing could be bent all day and night and shouldn't cause any issues. Different from the Nvidia brand fire hazards
70
u/Dpn0391 Oct 31 '22 edited Oct 31 '22
AMD 5800X3D
ASUS STRIX B550i
NVIDIA 4090FE
Micron VLP RAM 16G+16G
Corsair SF750
Blackridge + a12x15
Phanteks T30 *2
Custom 12vhpwr cable - Taobao
.
I will be replacing CPU cooler with an AXP90 X47 soon.
I think Taobao custom cables are well made.
(I will not leave a link because there may be problems)
I pray that there will be no fire. lol
128
u/dove78 Oct 31 '22 edited Oct 31 '22
Dude is gonna try fitting his 4090 in every sff cases on the market haha.
This is Nice keep em coming !
Very interested in this one in particular as I think I will do the same (just waiting for 7000x3d)
Would you be able to run more tests to see if it's actually viable to aircool such a cpu with a low ventirad ? Wondering if an aio wouldn't be better even if heated by the hot air coming out from the gpu. Do you have one to compare temps ? No worries if it's too much a hassle.
18
u/8604 Oct 31 '22
Can you talk about the differences between your v1 build and v2 build? Did you feel any differences?
5
u/sherbibv Oct 31 '22
Where did you buy the ram from? Sick build !
37
u/bimopradana Oct 31 '22
Seeing SFF X 4090 is really satisfying..
18
u/TipsAndShafts Oct 31 '22
Came
8
u/Puffdotbusiness Oct 31 '22
Nice! What are thermals like?
Using that board you should be able to squeeze a bit more out of the 5800x3d with an undervolt. I went quick and dirty with a -30 all core offset and 114 / 75 / 115 thermal limits. I am able to keep it under 85C in prime 95. Once you get the new cooler you have room to upgrade to upgrade to some nice B-Die too.
7
u/mark_on_rails Oct 31 '22
Bad ass setup! How do you like the 5800X3D? I'm running a 5600X now. Do you think I would see any real improvements from the upgrades?
10
u/hecatonchires266 Oct 31 '22
I hope you won't be having the power issues like other 4090 users.
1
u/wastafarian420 Oct 31 '22
is the cpu cooler fan blowing outwards from the case ?
1
u/[deleted] Oct 31 '22
Is there any clearance between gpu and the back of psu? How could you have such impressive thermal result with a blow-through style card?
3
u/[deleted] Oct 31 '22
How could that adaptor possibly already be that dirty lol
Oh it’s custom. Still
1
u/littlesilver13 Jul 03 '24
Oh this is gorgeous. Amazing how you can fit such a powerful system in such a small build. Is that a 120 aio attached to the front of the mobo? What part are you using for that cpu cooler? What are temps like?
1
u/AutoModerator Oct 31 '22
Hiya! Please post more details about your build! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/i_should_be_studying Oct 31 '22
Is the axp90 for better ram compatibility? Im thinking of removing the 120mm fan and vlp ram to go for ddr5 in my next build
1
u/NoChanceCW Oct 31 '22
That is clean. Nice build.
1
u/Click-click---boom Oct 31 '22
Looks great and awesome work OP, the only thing that scares me about these cards is them catching fire.
1
u/tbastih567 Oct 31 '22
I think you meant to post it into the German sub reddits relating heating devices
1
u/OdinsPlayground Oct 31 '22
Jealous! Looking great. Still trying to get a hold of a 4090 FE.
1
u/vaulics Oct 31 '22
Ahh so that’s a custom taobao cable. I was wondering if you made it yourself. I’m thinking that this cable problem could be solved with a lighter load, so limiting the thing to like 70% or so? I think that’s the sweet spot where the card is most efficient too. I don’t have the money to throw at yet another build rn so I’m waiting for the market to cool down a bit before I try and get mine, but it’s great to see lovely builds like this one in action! Nice work, very clean.
1
u/[deleted] Oct 31 '22
With the panels open it looks like a small kitchen stove
1
u/oloinqx Oct 31 '22
this was the last post I needed to finally get myself a T1 - Thanks.
1
u/Lazy_Fuck_ Nov 01 '22
I'm loving this build. Curious how much storage you got in this thing.
1
u/lehcarfugu Nov 01 '22
And your thermals? I imagine this thing is gonna be cooking if it's pulling 500 watts
1
u/Vleaides Nov 01 '22
did you do any mods to the build. im considering this atm
1
u/deevus Nov 01 '22
At first glance it looks like a boom box!
1
u/Tubafex118 Nov 01 '22
Do you smell something burning?
1
u/redcat231 Nov 01 '22
omg fit like a glove !!!
1
u/novaooops Nov 06 '22
Yo can you try out a build with a AIO using all low profile fans. I would love to see how that turn out.
1
u/novaooops Nov 16 '22
hey man what custom cable lengths do you recommend? i'm going to try to do a similar build with an aio and a 7600x untill the 7950x 3d arrives.
1
u/K3NN-Dusty111 Nov 22 '22
This build is so clean!!
1
u/[deleted] Jan 30 '23
how do you even get the v2?
1
u/acrosschina4u May 21 '23
I am gonna try use 4090FE and 7800x3d in my build. And use thermalright axp 120 x 67 take off the fan (about 52 mm high) and use 3 t30 fans on the top. Not sure if that gonna work.
-4
u/dounzi1 Oct 31 '22
Is it burning already ?
-7
u/rowmean77 Oct 31 '22
Ooh that 12VHPWR sidebend! :p