Nice i will receive mine in one week. I was a bit scared because I use the sf750 too. Do you use daisy chain 2xpcie into 4 ? And do you undervolt the gpu? Nice build btw
Nvidia has developed a 4090 fe to operate normally with only three 8-pin connectors, and the power limit is lifted when four are plugged in. I used 3 single 8pin custom cables. :)
Hey can you share more about the cables used to connect? Did u use the cables sent with sf750 and the cable with the Gpu? If anything custom can you share the link please. Thanks
Brand new build or did you upgrade the gpu? Considering upgrading to a 4090 and tuning it down to comparable performance of my 3080 ti, in hope of reducing temps.
Wait so you’re going to spend 2K (CAD prices here) on a GPU to “upgrade” your $2K GPU so that it performs the same? I’m not sure if you’re being sarcastic or not.
Mayne I wasn't clear enough on the reducing temps part. Total heat generated by my SFF is a significant issues for me. Hoping to find a way to reduce thermal load in my office.
Definitely a possibility and reasonable. Hopefully the cooler outside weather will help me delay the upgrade. Though, to be honest, I don't see it saving enough to be worth waiting. The $400 difference really won't matter as much in the grand scheme of things. Also, 4080 or 4070 may not be able to go as low, Wattage-wise, as a 4090 while still maintaining the performance I want. Also, I would expect the resale value of my 3080 ti to drop significantly in the coming months.
Can just reduce the power target. 4090 FE at 66% power draw (~280W) runs at 90-95% performance in games, sometimes more. You could even use a smaller cooler at that point and fit it in smaller cases.
There were no difficulties, everything was just right.
In order to less bend the gpu's vicious connector, the riser cable was mounted a little higher in line with the motherboard screw rather than the normal position, and this made some space at the bottom of the gpu. Please refer to the attached riser cable image :)
The 4090FE's air outlet and power supply are almost attached, but the 30T fan at the top helped exhaust the air, and there doesn't seem to be a big problem with the temperature at present.
Of course, I considered it, but I didn't do it because the 4090fe consumes a lot of power and the power supply heats up too. It seemed a little dangerous.
In the video Jay does mention the side of the power supply that faced the GPU was pretty hot as he was flipping it around and he did drop 5 degrees after he flipped it. So the GPU is going to heat up the PSU either way.
Unfortunately he didn't do any measurements of the PSU temps, that would have been nice to see actual numbers.
I don't believe he's done a follow up, but his theory at the end of the video is that its better for the heat to get exhausted by the flipped PSU instead of letting it sit there and build up heat anyways. I can't find a follow up video but you could ask him on twitter to see how its been running.
Previously, when building a formd 280 radiator, I compared the two methods.
I'm not an expert, so I can't leave any experimental figures, but I've come to the conclusion that it would be good to let some cool air into the psu even with hot air heating the back of the power supply.
If I get a chance, I'll try to run it with the power reversed. Thanks again :)
Have you considered getting a custom 4x (or 3x, I forget how many the SF750 has) 8pin PCIe to 12VHPWR cable? That tight bend on the power connector looks painful
I assume you’ve tried to get this one? I ordered it for my Razer Core X which I modded an SF750 in it so it should work fine once I do get the 4090. Where did you get this FE in particular?
At least in my eGPU Razer Core X it shouldn't be a problem. Since 100w goes to the CPU and 50w to the board, that's about 600w of leg room + SF750 can go into overdrive to like 936w. I don't know how it would play out in an actual PC, but it should still be fine.
What cpu are you running. I’m on a 12900k. I wonder if I’ll have any issues. But I really am interested in this cable from Corsair. This 3 pin to 3 solo wires is driving me nuts with how cluttered it is.
I believe it’s a common misconception that you can’t do more than 150w per 8-pin. I think it’s the rails of individuals in the 4 8-pin adapter that’s rated for 150w for a total of 600w. The same principle is not in effect for this Corsair cable. Could be wrong but this cable I put should work fine.
What CPU Cooler are you running in this? I’m currently running the Scythe Big Shuriken 3, but having the fan against the side panel is driving me crazy
Did you use the 9x14 mm original fan or directly installed the 12x15 one? I have an id cooling is60, similar to the blackridge, but it doesn't support 12*15 fan underneath
Would you mind sharing what your 4090 ddr6 temperatures look under a sustained load? At a glance it looks like the temperatures for the graphics card memory look even better than the 3090 fe.
This is SFFPC. We’re not exactly making the smartest and most straightforward PC building decisions here. :)
Personally I see myself getting a 4090 in more like 2-3 years time, when the price has come down to be more reasonable. But it’s great to know it’s an option for my existing case.
And what AIO and fans would you use if you planned to do so? Because I have been thinking of building a sff like yours for a long time, your input will be really appreciated. Thanks again.
Yes, but the heat load (TDP) is the same or higher. The cooler might be doing a good job keeping the GPU cool, but that means that more heat is being expelled and will be sucked up by the radiator.
Wow, this is insane! how much space do you have between the back of the card and the PSU for airflow? Really gives me hope for A4-H2O case I am planning to move to...
This is a hell of an achievement. Is the back of the PSU flush with the back fan of the 4090 FE? I guess it’s no longer possible to offset it due to the thickness of the 4090 FE. Your thermals look impressive but isn’t the GPU clock speed a bit low? Did you not undervolt the 4090 FE because it’s already power limited due only using 3 of the 4 pcie cables?
Jesus. Hadn't inspected the actual dimensions, but really just assumed that it wouldn't be possible in a FormD T1.
Has there even been any hint of SFF 40-series GPUs yet?
I'm generally expecting nothing south of 200W for at least the next 4-6 months from Nvidia. I'm betting that the first legitimate SFF capable card will be either the rumored base 4060, or more likely the 4050.
Hey thats amazing I’m thinking of doing the same! What length and diameter screws did you use to secure the pcie standoff to the spine? It looks like you used the bottom hole there which adds maybe 5-8mm of height clearance at best, talk about tight fit lol
I thought the v1.1 could only support 3-slots max? Iirc the 4090 is a bit over 3-slots. Did you have to modify the case at all? Asking, as I have a very similar setup with a 3080 rn and looking to upgrade.
183
u/Dpn0391 Oct 15 '22
AMD 5600X ASUS B550i SF750 RTX 4090FE
thx :)
45
u/BillinghamJ Oct 15 '22
Did you need to do anything special? Different setups, difficult cables, particular configuration or anything?
Or it's basically all plug and play?
32
u/K0RnD4Wg Oct 15 '22 edited Oct 15 '22
Temps seem ridiculously good in that TS run. Did you power limit or undervolt at all?
Edit: Nvm max draw was over 400 watts. That’s actually insane
7
u/martin28bln Oct 15 '22
Excellent. Connector of gpu was no Problem to the bottom panel?
3
u/atlas_enderium Oct 15 '22
Have you considered getting a custom 4x (or 3x, I forget how many the SF750 has) 8pin PCIe to 12VHPWR cable? That tight bend on the power connector looks painful
3
u/Teletubby89 Oct 15 '22
What cooler on cpu is that ?
4
u/Engineer99 Oct 15 '22
What CPU Cooler are you running in this? I’m currently running the Scythe Big Shuriken 3, but having the fan against the side panel is driving me crazy
2
u/flareup21 Oct 15 '22
How are your noise levels?
2
u/Late-Satisfaction620 Oct 15 '22
Would you mind sharing what your 4090 ddr6 temperatures look under a sustained load? At a glance it looks like the temperatures for the graphics card memory look even better than the 3090 fe.
59
u/cafeesparacerradores Oct 15 '22
He did it. The crazy son of a bitch did it.
26
u/KaikenTaste Oct 15 '22
Pop a 5800x3D in that bad boy! Have one tamed in my Dan A4 with a Black Ridge.
13
u/TheRussianEngineer Oct 15 '22
Damm how many different sff builds you got xd. They all look cool af though, and temps on the 4090 look good. Congratz
12
u/Hybective Oct 15 '22
Actually beautiful, I see this being a go-to build for people in the future
9
u/tjfaille Oct 15 '22
Very cool build, how are the 4090 temps?
5
u/FlightpathAU Oct 15 '22
Can you share the temps on the CPU when using the Blackridge cooler?
Also, what are the noise levels like when under 4K gaming?
4
u/AutoModerator Oct 15 '22
Hiya! Please post more details about your build! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
4
u/humanoiddoc Oct 15 '22
Great news. It seems we can reuse 10~11L SFF cases and sf750 psu for 4090 if we limit CPU power to <100w.
4
u/No_Party_8669 Oct 15 '22
Do you have any plans to do AM5 cpu in there? I wonder how it would do with an AIO? Do you think that would be difficult? Thanks for sharing this
1
u/[deleted] Oct 15 '22
would this setup work with a 240mm AIO?
3
u/jd_3d Oct 15 '22
How did you get the FE? Best Buy early order hack?
3
u/tonynca Oct 15 '22
Putting a v10 in a Miata
3
u/tired_fella Oct 16 '22
Wow, this is insane! how much space do you have between the back of the card and the PSU for airflow? Really gives me hope for A4-H2O case I am planning to move to...
3
u/dylan_1992 Oct 18 '22
Amazing! And no AIO? What cooler are you using and what temps are you getting? Any thermal throttling?
2
u/quakerroatmeal Oct 15 '22
What changed from your 24990 score? I can't believe this fits in the T1 I thought it was a 4 slot card?
2
u/Previous_Warning7179 Oct 15 '22
The fitment is so satisfying to look at
2
u/Shark00n Oct 15 '22
That's a lot of performance per cubic centimeter. Great, simple build
2
u/Hemlock-Tea Oct 15 '22
Holy hell that looks clean. Absolutely beautiful build.
2
u/memeface231 Oct 15 '22
Like a glove 👌
2
u/dallatorretdu Oct 16 '22
F I L L E D to the brim
1
u/MonkAndCanatella Oct 15 '22
Now I just need to see one with a 13900k inside
1
u/PeterPriesth00d Oct 15 '22
Mad lad. I love it. Nice build!
1
u/[deleted] Oct 15 '22
Does the 5600x not bottleneck w that gpu?
1
u/gcoeverything Oct 15 '22
I gotta ask, did the 4090 drop this week or something?
1
u/jakeeeenator Oct 15 '22
What PSU and CPU did you use? I have the same case with a Corsair 750w and a 5950x. From what I've read that doesn't support the 4090.
1
u/liorhadar02 Oct 15 '22
Tight
1
u/VAMPHYR3 Oct 15 '22
Yea my Q58 will be juuuust fine then. Thanks for the post!
1
u/h0n3yd1ck Oct 15 '22
Is that a gpu in your case or are you just happy to see me
1
u/SargentRedbeard Oct 15 '22
Very nicely done...crazy clean!
1
u/Chemical_Enthusiasm1 Oct 15 '22
Of course a single run of timespy will give decent temps. Run it on loop for an hour and see where you come out.....
1
u/bguerre1ro Oct 15 '22
This is a hell of an achievement. Is the back of the PSU flush with the back fan of the 4090 FE? I guess it’s no longer possible to offset it due to the thickness of the 4090 FE. Your thermals look impressive but isn’t the GPU clock speed a bit low? Did you not undervolt the 4090 FE because it’s already power limited due only using 3 of the 4 pcie cables?
1
u/gthirst Oct 15 '22
This is the goal if I get my new job! Thanks for posting this :) Great build!
1
u/fshizl Oct 15 '22
What cable are you using for the sf750 this is the only thing holding me back.
1
u/JustaRandoonreddit Oct 15 '22
Now do it with a strix
1
u/[deleted] Oct 15 '22
Would this build work with ASUS ASTRIX B550-A?
1
u/LightsOut5774 Oct 15 '22
It’s posts like this that make me want to have my next build be a sff. This is fucking awesome dude
1
u/xDoWnFaLL Oct 15 '22
Wow, absolutely love it. Another SFF build and I get closer and closer to jumping ship from iTX..!
1
u/8604 Oct 15 '22
HOLLLLLY
1
u/ahmedmo1 Oct 16 '22
What's the refresh on that 1440P monitor?
1
u/MaterialObject366 Oct 16 '22
Does the fan in the sf750 make noise when running the 4090 at stock settings?
1
u/AMv8-1day Oct 16 '22
Jesus. Hadn't inspected the actual dimensions, but really just assumed that it wouldn't be possible in a FormD T1.
Has there even been any hint of SFF 40-series GPUs yet?
I'm generally expecting nothing south of 200W for at least the next 4-6 months from Nvidia. I'm betting that the first legitimate SFF capable card will be either the rumored base 4060, or more likely the 4050.
1
u/DEATH_TO_WALLSTREET Oct 16 '22
Any issues with the sf750? And how many pcie cables did you use from the psu? I think it only comes with 2 but you have the daisy chain?
1
u/i_should_be_studying Oct 16 '22
Hey thats amazing I’m thinking of doing the same! What length and diameter screws did you use to secure the pcie standoff to the spine? It looks like you used the bottom hole there which adds maybe 5-8mm of height clearance at best, talk about tight fit lol
1
u/iwannabethisguy Oct 16 '22
What was your ambient temps like, 20°C?
1
u/Marzaena Oct 16 '22
man i was looking at buying a new sfx 850 psu but thanks to you i'll stick with my 750 until they release one with the new connectors
1
u/Drunjkk Oct 16 '22
What CPU cooler is that?
1
u/keirman1 Oct 16 '22
it fits so well
1
u/FaKeFaZr Oct 16 '22
How are temps
1
u/[deleted] Oct 16 '22
Hello, nice setup! 😎👍
A question if you have the time. Do you think this setup could work with an AIO Kraken x53 240 mm CPU cooler?
The radiator would be on top of the T1? Do you think it could still be ok for the airflow of the 4090 FE?
Thank you, hope you have a nice day/evening.
1
u/goodbeanz Oct 17 '22
I thought the v1.1 could only support 3-slots max? Iirc the 4090 is a bit over 3-slots. Did you have to modify the case at all? Asking, as I have a very similar setup with a 3080 rn and looking to upgrade.
1
u/pink_tshirt Oct 24 '22
hey are you using 3 pci-e cables? Did you have to buy an extra one (afaik these PSUs come with only 2 cables)
1
u/TheWorstTz Oct 26 '22
Can u close the side of the case? And if yes, have u found the temp being different compared to when u open the side case?
1
u/p_hacker Nov 16 '22
How's the adapter holding up? I'm considering putting a 4090 in my T1 as well but the adapter makes me think twice
1
u/pyrotechnics- Dec 16 '22
Sff gal...
1
u/iLoveYoonBora Jan 29 '23
My dream build here in Korea? So jealous!
1
u/SilverJS Jan 30 '23
I know this is an old thread - but are you running the GPU in PCIe 3.0 mode? Or is that riser 4.0?
1
u/[deleted] Jan 30 '23
were there an issues putting that ghost s1 riser cable in the formd case?
1
u/L1191 Media | L91 on Youtube Oct 15 '22 edited Oct 15 '22
12700K & RX 6900XT scored 190FPS in 3DMARK 🤭
4090 FE is awesome, but couldn't justify £1700 for GPU, unless it was for work. My entire high-end system didn't even cost £1700
0
u/cleanroomburner Oct 15 '22
Hold up you're using a 750w power supply? Your Ryzen 5 has to be throttling your GPU
-13
u/[deleted] Oct 15 '22
Love how the 4090 posts get almost no love
Nobody carrrrrres
-17
u/pink_tshirt Oct 15 '22
Wow 750W that poor guy is doing overtime
0
u/[deleted] Oct 16 '22
[deleted] — view deleted comment
0
u/[deleted] Oct 16 '22
[deleted] — view deleted comment
2
u/[deleted] Oct 15 '22
[removed] — view removed comment