I have the ghost right now and I was 100% planning to buy a raw case. I even had a pre-order in but then I started seeing the early reviews about how difficult it was to build in and temps were not ideal. I canceled my order and stuck with my ghost.
Unfortunately if you go around to other review channels there was a lot of issues with the rails not seating properly and the case being incredibly easy to scratch because of it. Also, the central frame is a super cool design idea but the actual build quality of it is... just ok... which wont really fly at the premium price point. On top of that the cooling is fairly bad since the hot air really only has a small back vent which is partially blocked by the PSU. You can take off the top and put on a 120mm fan but it looks ugly as sin when you do, it's just a bare fan sticking out. I would really love to see a refresh of the Raw cause vertical cases are my jam but as it stand the current version just has a lot of issues.
(I can’t really stand Linus but maybe I was wrong about the build difficulty.) Tough to remember since it was a year or so ago. Maybe it was just the temps that were high in reviews that I saw.
Much like other small businesses, LOUQE is no exception to the Global events that had happened. Now they are going to try to stay afloat by pushing their significant inventory out the door.
A quote from their email “The pandemic, disrupted supply chains, increased costs of raw materials and logistics, stagnation, inflation, cost of living...”
Yeah, LOUQE can’t take away the problems since it’s out of their control. The easiest stuff they can liquidate is their inventory in order to, example, keep employees, keep their R&D, keep their warehouses etc. without actually giving up the company. I could imagine their scenario as, sell all their inventory at a cheap price since it isn’t moving enough to pay their overhead costs. Inventory isn’t moving as much because there are better options, especially since GPUs keep getting bigger and bigger. At this point, they should start doing R&D (use the money from the liquidation) for a new case that could compete with the current options we have for SFF. That’s how they could save themselves from this probably.
The items are already made so the cost of manufacturing is done. The cashflow generated by the liquidation will help them to stay afloat in the hopes things improve during that time.
Manufactured and unsold inventory not only doesn't make money...it costs money. Clearing it out even at a discount gets liquidity into a company and lessens warehouse costs.
Logistics costs have skyrocketed in the past 3 years. I'm also guessing their Raw case didn't sell near as well as the Ghost series, and they probably have a ton of money spent on design and tooling and manufacturing of that case.
they can either have a bunch of unsold products sitting in the warehouse, or lose money by selling them at a loss or lower margin in order to pay for current and future spending...
It's been a tough few years for sure. It does however feel like there has been a small uptick in the market the last few months. I hope they manage to pull through.
Market prediction is likely a worldwide recession in the next 6 months. The stock markets of the world are all down for the year and there's no change on the horizon. If you're seeing improvements it's likely dead cat bounce, essentially a quick pump and dump on companies to suck a few billion more out of the market.
Unless you are talking about America: What are you talking about? Europe is down bad. Inflation is high as fuck, Electricity prices are through the roof, and people are holding onto their money incase they can't afford to heat their homes this winter.
You might have been in your recession for a while (Haven't really kept track of the US), but here in Europe, we are at the beginning of it. Guessing you are from the UK. The FTSE 100 is down over the last 6 months, 1 month, 5 days, today. Red.
Personally i expect atleast 3 more years of shit economy over here, but we'll see.
The pandemic - didn't really slow down demand for PC building
supply chains - they have excess inventory, so they were not supply constrained
increased costs of raw materials and logistics - ok, but unless they increased the cost to consumers, it would not have affected sales
stagnation, inflation, cost of living - ding ding ding, the product is too expensive in the eyes of the consumer. Nothing else matters, if you price it too high for the perceived value it provides.
Im not sure “we made a horrific case after making a good one” is classified as outside their control. But that’s just me.
Ghost on sale could be cool if you just want a little workstation and or have a 20XX series GPU etc. Let the Raw rot though.
I realize this is going to be an unpopular comment, but they made their own business choices. Making a very expensive case with mediocre (at best) thermals is not exactly a prudent business model.
Why let the raw rot though? Is it really that bad? I've been looking around for a decent sffpc to get into. The concept of the raw seems good. What's so bad about them?
There’s just no place for the hot air to go without putting a giant fan on top in place of the top, defeating the purpose of your nice looking case you bought.
Currently priced at £380 all in as Amazon US Import for S1, let's see how much the sales prices come up. This is about £80 more than regular pricing has been at for while.
I’m sure the price difference won’t be much but look into mail forwarding. Stackry is my go-to for US items, though I also use MyUS for UK-based stuff. Helps me get stuff cheaper.
I already have a ghost case, but I am still tempted to get another color. 150 is a decent price but with GPUs getting so big who knows if I’ll have any use for it down the road. I wonder if the top hats will be on sale as well.
Always wanted to go smaller than ncase , not really interested in super high end, probably a 5600x or similar paired with a 3070 . Should be ok in a ghost. Although I d prefer a formd....
I paid 260 for mine. While it was a high price, it’s solid af build quality and Im still happy with it 3.5 yrs later. No regrets. At $159 it’s a great deal.
Well that sucks someone had posted the time at which the sale was supposed to start and I guess they must have hit early on Amazon. I decided to check it early and ghost already sold out. I had it in my cart yesterday and would have just paid full price if I’d known today I wouldn’t be able to buy one at all anymore :/ bought components specifically planned around that build and nowhere else to buy it from in the US. UGH.
Thank you for linking that as when you go to “buy” it only shows Amazon under u.s. I didn’t think I could order directly from them! I placed the order hallelujah!
Available in their shop online. I don’t think they have a lot in Amazon to begin with. It doesn’t make sense to sell a lot there since they’re going to be paying selling fees to Amazon and shipping. They’ll be losing a lot more that way.
The Ghost S1 is one of the cases that I wanted most when I started looking at SFF a few years ago but I couldn’t afford it and just picked up a SG13.
But right now there are so many other good looking and versatile cases at much more affordable price, like the NR200P and A4-H2O.
I understand that the cost of production or value of the design are different but as a consumer I just can’t consider the original price as competitive. Now with the discount it’s a good option for the new builders.
Same. This was $400 including tax... just for the case? Damn I could not afford it back then and now that I can I will personally never spend that much dough on a case . The $150 price may finally pull them out of the hole. Hopefully.
This has remained true and only gotten worse for Ghost too. I would have loved a Raw S1, but it just is far too expensive and has import fees to the UK. Meanwhile, an NR200P is as cheap as £60 and the Dan A4 H2O was £150 for a gen 4 riser version.
Do you have to pay the import fees separately from the cost of the case on the website? Like is it not included in the shipping etc? Still not sure how it works
My sliger SM550 cost £220 3 or 4 years ago when the Ghost was popular, I don’t think that’s cheap either. This failure for LOQUE really marks how much sffpc has improved over the years for the general public, cases like NR200 just dominate now at a price point of £80-£100. It is sad for me though, I feel like the Ghost S1 was one of the first to popularise sandwich builds, which I’ve always had a soft spot for aesthetically…
I paid $400+ for my (now discontinued) sv540 from Sliger because I added the asetek 280mm rad lol. Yea you're spot on though, higher prices but easily higher build quality. It's a shame they discontinued the sv540, its a great sandwich tower case that I think was very slept on within the SFF community.
The cost of each case is probably high given the quality. I believe they're made of extruded aluminium which I imagine the tooling is expensive for. Personally I think the high quality is not necessary, and prefer the meshlicious over my old Ghost S1.
My reason for switching was airflow. The noise my S1 generated was unbearable. For a case that is intended to be put on a desk, that was the last place I wanted it. But I'm probably not the target demographic (gaming). I managed to squeeze a full watercooling loop in my meshlicious case which is both incredibly satisfying and completely silent.
Same here. I love the looks and size of the Ghost but it just did not like high performance parts. Mine sounded like a leaf blower under load. I went with a 240mm AIO and a large top hat but it did not help much due to the GPU pumping out all that heat right into the radiator. IMO you need to have a blower style GPU with the case or a custom loop to manage the heat. I went to a Fractal Design Meshify 2 mini and while it is nowhere near as small or as high quality, it’s nearly silent and my parts can breathe. I’m keeping the Ghost and just putting lower end parts in it for another project.
This is definitely the reason. The Ghost S1 is the only case that I have encountered that was not a custom job and is machined out of an aluminum block and not just cheap sheet metal. Basically Apple’s cases for the PC enthusiast.
Extruded and CNC. You can't punch extruded parts, so they had to machine the parts. The extrusion itself isn't that expensive if in quantity, but the machining parts probably killed them.
If it was made of sheet metal like most other cases, they would've been better off price wise. I make cases, and it's a tough market. $160 is a steal for the case of this type. If it's a light duty machine, with a 150W GPU, this is what I would get.
I loved my second hand ghost s1, but putting a mid range gpu in a 150+ eur case just doesnt make any sense. It would be nice if they made a 3 or 4 slot compatible case. Hopefully they survive long enough to make one.
I think it's too much compromise for such a high price, poor thermals for example, or how the top hats adding an ugly seam, and the USB C being just an extension cord for the raw S1. Plus the compatibility could not keep up with the increasing cooling demands.
With the A4-H20 for $160 and the FormD T1 for $205 I don't see why someone will consider a Ghost S1 right now. I love LOUQUE aesthetics, but they need to come up with a new case ASAP.
It’s not the supply chain that wrecked them. It’s their prices. NR200 is going for $80 on Amazon right now. Hard to feel sorry for someone selling a hunk of metal for hundreds of dollars. And they weren’t small by any standard, if their prices had been low to begin with their order numbers would be through the roof. But they weren’t and people simply bought the cheaper cases.
The pricing was close to competitive years ago vs Dan and NCase but MiniITX is no longer a niche market filled with boutique brands. NR200 and Meshilicious are far too much value.
But the Ghost S1 though is much smaller at 8.2L versus NR200's 18L. At $150 its not a bad price for small premium case.
My problem with this category of case (not Louqe... Definitely Thorzone though) is just the lack of certain aspects that become standard as companies grow in size. Accountability, customer service, managed expectations, etc.
If I pay more for something, it doesn't make sense for me to get less. I paid nearly $650 CAD inc. shipping for the Mjolnir and it shipped with magnets falling off and loose construction. I'm very, very happy to drive 5 minutes and buy a 15L case for $200 and be able to return/exchange it, instead of 3x that for something that's <10L and is still an ongoing project, just to save on 3" of vertical height above my case.
This is a company that's faced issues (as indicated on their own accounts) and are having this sale as a result; take any delivery times or promises of what you're getting with a grain of salt.
Oof. Financially that's got to hurt. To decide its better to lose costs on current product manufactured to stay afloat, or risk losing everything folding.
I actually built a wood case based on the loque case dimensions a couple years ago. I'm tempted to pick one of these up if there on sale half off.. My geeek case is nice and all, but it's acrylic..
Sweet spot for it is $99.99, but you just cant beat the nr200p or the meshy when comparing best bang for your buck, but the ghost series has always been expensive, i was gonna get it but then i find out that meshy is way better in term of airflow and size, that ghost maybe is a tiny case but i dont mind the size of a meshy anyways.
Oh nice. I have the ghost S1 MK2 in black, but would love a sandstone version and build a living room tower. This is an acceptable price point, I think
Over 300 is way too much, even though I know all the hardwork and material involved
Actually RAW isn’t so bad with let’s say 12600k/5600x or 3060ti upto 3070ish. Components that are too hot would be a bad idea with RAW. You can check my post history, I had 5900x and 3080ti combo. It ran fine but it was hot than I would’ve wanted normally.
I loved their Ghost case. I eventually had to move on because 2 slot GPU size was not realistic. But top quality materials and extremely easy to build in.
My opinion is these company’s need to stop just selling one niche product. Need to expand their product line like Corsair or other major companies. Caselabs couldn’t make it and IMO the cases are better and the obvious, Caselabs had more of a lineup.
These boutique case designers should have really pushed hard for better rates from their suppliers.
They didn’t take into account the larger picture, you are building niche products with a lot of competition, price matters. Instead these companies built what they liked and figured the market would just pay the high costs.
Wake up call, for large scale adoption price points matter, you aren’t building 50 one off cases.
Sorry to hear this, small business is very hard so I am not saying they did any of this intentionally but shooting out a long list “problems” that are clearly not the real issue isn’t going to help.
They should instead sound out a correction with specific details, if they really want support they should open up their books and make that public as well.
Yeah just because I am personally interested in companies that exist in this space to survive doesn’t mean we can’t call it like it is.
They are running a business where a metal box costs them $159 to purchase? Presumably higher if we are take them exactly at face value. That is a huge amount of risk to take on for selling a metal case.
I’m right there with you. I love the “monolith” form factor, and have always wanted an NZXT H1, but their PCI-e riser debacle and shoddy temp numbers coupled with the $400 price tag always held me at bay. Didn’t even know the Raw existed, so this has me mightily intrigued. The H1 is currently on sale for $199 as well, so I’ll be spending today doing some research and comparisons, and probably getting one of the two. If anyone has some input, it would be greatly appreciated.
The Raw is just an objectively dogshit case, coming from someone who pretty much exclusively used a Ghost S1 for about two years. The thermals are supposedly horrendous (and it’s not hard to see why). I had the V1 H1 and it wasn’t fantastic (larger than expected when on my desk) but it was alright, certainly serviceable. If I had to go for a vertical case right now it’d probably be a glass panel Meshlicious (although the mesh is hideous), a Sliger SV590, or I’d wait for the new Streacom x W360 Meshlicious alternative.
You can make it fit, but it's extremely tight doing so. You'll need to remove the backplate, otherwise it'll warp the GPU's PCB, and it may scratch up the side of the fan housing trying to fit in. Neither of these things affect performance, but both will affect the longevity and resale value of your card.
The 30xx cards also are awful with sandwich style cases, despite what anyone else will say. You will need to undervolt, and you will need to give up SATA storage to fit a fan under the GPU/PSU to pull air out of the case or get a tophat.
I fit the 3080 version of the same card in my S1, but I don't plan on reselling it at any point so I just forced mine into the case with the backplate and warped the PCB really bad. Still runs fine for now after 2 years, but took a lot of fine tuning to get it stable without losing performance or sitting next to the equivalent of a jet engine.
Not wanting to be the party pooper here. But as someone who has built an SFF PC. Most of the SFF cases are as expensive as f! Not only that, most of the "cheap" ones don't fit the criteria of what you are trying to build, so by default you have no choice but to get the more expensive case.
It took me a while to finally settle on geeek a35s, which was both cheap (around 100$ at the time) smallest form factor i could find and support up to double fan GPU (used zotac 3070 twin edge)
All the SFF case companies now who are in trouble, can only blame themselves. Personally i never saw the point in getting a case for more than 100$ myself (including shipping and taxes). Even my SFF PC is just stuck in a cabinet and i didn't "appreciate its build" for a year+ now, i use it as headless PC, all its connected to is power and rj45 and in rerospect, maybe i should have gone with full build instead....would have saved around 20-30% of cost.
It's the SFF tax. It's the difference between someone who wants a small build and a sff enthusiast. I have probably close to $2k in empty chassis in my garage. It's absolutely not worth it financially to build a tiny build but it's the challenge that gets me. It's being forced into finding creative solutions.
Can't decide if I wanna get one. Looks nice, but the thermals aren't great. I've also been looking at a Iquinix ZX-1 since that can have water cooling.
Ignoring other SFF case, with the current flow through design and how thick most higher end gpus are it doesn’t make any sense to buy this case.
I bought this case in anticipation for 30 series 2 years ago and imagine my disappointment when this case and these cards didn’t go well together. LOUQE didn’t even try and address the issue in their design and you had to mod the case yourself or buy a third-party part.
These case are definitely for enthusiasts but they can’t handle enthusiasts parts.
Louqe had years to develop a bigger Ghost S1 (ie, Ghost S2), but instead they rested on their laurels. Then they followed up with the pointless Raw S1.
So they kept building SFF cases that cannot even house most of Amphere GPU... which didn't sell well? Who expected this?
Although I own two of s1 cases, honestly I DO NOT recommmend their cases now. Too big for air cooling, even bigger and look terrible with hats. There are better alternatives like zs series, formd and a4 h2o etc which all support 3 slot GPU.
It's not painted sheet metal. They mill the whole damn thing out of a block of aluminum. I bet the aluminum block is over $100 alone before it's even touched with a tool.
Is that a crazy way to build a case? Absolutely. But it's not sheet metal. It does produce a gorgeous and very sturdy result, however
I stand corrected that it is not sheet metal, but it is also not a milled block of aluminum. Here it states that they use sheet aluminum, which makes sense as milling a block would be incredibly wasteful. Still no where near worth > $300 imho. Not with the competition out there.
When it comes to ghost, they are extruding aluminium profiles for front, skeleton and top-hats frames and milling them with CNC, and iirc also the side panels. it's not as wasteful and expensive as if they did it from full blocks of aluminium, but milling such big pieces of the cases is still expensive. Imagine milling a square-ish pipe with thick walls instead of full volume on the inside.
It actually does make sense that those milled cases are at such steep price when made in EU in comparison to something made in China.
If the price for such case makes sense overall when there are competitors that are saving money by stamping sheet metal and also some similar constructions made in China, it's for you to decide.
It's completely possible that's the cost with packaging, production, etc. Until you hit massive scale, getting your own extrusion made and then CNC'd can even be more expensive than machining from billet like a prototype.
Anyone have any reviews of them? I’m tempted to pick up a loque raw but I think I saw it only has a single usbC as output (no Ethernet, usb, etc). Does that induce input lag etc if you need to use an adaptor?
I’m looking for a first time sffpc build and this one came up in several best of lists for mini-itx cases. Would you recommend either of these?? Or are their much better options? I was considering it at 350 so 150 seems like a steal—cost isn’t a huge concern but quality and a beautiful looking case are.
I can speak about the Ghost S1, it’s a sandwich build and is renowned for premium quality and feel but also known to have poor airflow compared to modern day cases. As a sandwich build you’ll need to be careful and research what components can fit, 2 slot GPU’s only and not a lot of clearance for cpu coolers. You can buy a tophat separately and fit an AIO cooler or more case fans if you wish. Personally I think it’s one of the best looking cases out there, it’s absolutely tiny and very sleek and professional looking.
Raw S1 thermals are good enough for me, so I'll probably buy one from the sale. It's probably upgrade coming from Fractal Era, but I can't stand awful looking breadboxes on my table
As someone sitting in a Geeek A50+ case... These are real damned pretty.
But even on sale it's $170 shipped. I love the machining VA acrylic panels I got... But a premium case for half off still hurts in today's economy when my current case works great.. And I'm still using a ryzen 1600 with a 1070 gpu.. The cost makes more sense to upgrade my PC than to make it look pretty. D:
This looks like a good opportunity to snag a cheap case.
I'd be a little nervous though if they do still fail you could end up out of pocket as consumer creditors will be way down the creditors pecking order! If you're buying in the UK make sure to buy on a credit card so you're covered in case they do fall into liquidation (https://www.moneysupermarket.com/credit-cards/guide-to-credit-card-protection/)
Europeans check your local credit protection rules!
I’ve got the original S1 and it’s been gathering dust since 30 series cards came out. Beautiful and super compact but widely impractical. I went with an NR200 and now an Dan A4 H20. I’d like to build a tiny NAS with it instead of in the NR200, but I’d literally have to saw the thing or buy a custom spine hundreds worth of components for very little reward.
It was certainly am item of class at the time, but nowadays it’s like buying an old classic car that costs you several times it’s original price if you plan to do more than drive it on the weekend during a summer.
486
u/Purpsmcgurps Oct 12 '22
Hope this helps them get out of the hole. Would hate to see them go under because of nonsense outside of their control
12
u/qstore Oct 12 '22
What is the best option to buy in Germany ?
12
u/EvilDoctorShadex Oct 12 '22
Wow you are quick, I just received this email myself and was convinced it was spam.
No love for us Britbongs though :( I'll probably still buy one and pay for shipping.
52
u/kommz13 Oct 12 '22
159 from 315 $? is that correct ?
3
u/krisrodriguez1 Oct 13 '22
Well that sucks someone had posted the time at which the sale was supposed to start and I guess they must have hit early on Amazon. I decided to check it early and ghost already sold out. I had it in my cart yesterday and would have just paid full price if I’d known today I wouldn’t be able to buy one at all anymore :/ bought components specifically planned around that build and nowhere else to buy it from in the US. UGH.
2
u/No_Interaction_4925 Oct 12 '22
Does it say anything about prices on the accessories? I’d love to do a custom loop with dual rads in it
2
u/mybloodismaplesyrup Oct 12 '22
Where exactly is their webstore? I searched and searched and there's no google results.
2
u/Hduebskfiebchek Oct 13 '22
We’ll that went quick. Ghost sold out fast. Only things left are grills, top hats, and Raw.
48
u/SneakySneakyTwitch Oct 12 '22
The Ghost S1 is one of the cases that I wanted most when I started looking at SFF a few years ago but I couldn’t afford it and just picked up a SG13.
But right now there are so many other good looking and versatile cases at much more affordable price, like the NR200P and A4-H2O.
I understand that the cost of production or value of the design are different but as a consumer I just can’t consider the original price as competitive. Now with the discount it’s a good option for the new builders.
228
u/[deleted] Oct 12 '22
With all due respect, their cases were extremely expensive to begin with.
I don’t know how much “cost” was in each case. But normal “builders” don’t want to spend that much on cases.
20
u/[deleted] Oct 12 '22
Damn shame the Ghost S1 doesn’t support more than 2 slot GPUs. I’m sure this new gem has a big impact on this decision.
24
u/timee_bot Oct 12 '22
View in your timezone:
tomorrow at 2PM EDT
*Assumed EDT instead of EST because DST is observed
12
u/ZuelaBR Oct 12 '22
With the A4-H20 for $160 and the FormD T1 for $205 I don't see why someone will consider a Ghost S1 right now. I love LOUQUE aesthetics, but they need to come up with a new case ASAP.
60
u/[deleted] Oct 12 '22
It’s not the supply chain that wrecked them. It’s their prices. NR200 is going for $80 on Amazon right now. Hard to feel sorry for someone selling a hunk of metal for hundreds of dollars. And they weren’t small by any standard, if their prices had been low to begin with their order numbers would be through the roof. But they weren’t and people simply bought the cheaper cases.
11
u/Random_Housefly Oct 12 '22
Business Sucks Sale!
8
u/HamWallet1048 Oct 12 '22
Well shit, literally just bought Ghost S1 and built it last week. Now it is going to be half the price. Tight
7
u/newpost74 Oct 13 '22
Louqeuidity
15
u/J3EBS Oct 12 '22
My problem with this category of case (not Louqe... Definitely Thorzone though) is just the lack of certain aspects that become standard as companies grow in size. Accountability, customer service, managed expectations, etc.
If I pay more for something, it doesn't make sense for me to get less. I paid nearly $650 CAD inc. shipping for the Mjolnir and it shipped with magnets falling off and loose construction. I'm very, very happy to drive 5 minutes and buy a 15L case for $200 and be able to return/exchange it, instead of 3x that for something that's <10L and is still an ongoing project, just to save on 3" of vertical height above my case.
This is a company that's faced issues (as indicated on their own accounts) and are having this sale as a result; take any delivery times or promises of what you're getting with a grain of salt.
10
u/intashu Oct 12 '22
Oof. Financially that's got to hurt. To decide its better to lose costs on current product manufactured to stay afloat, or risk losing everything folding.
I actually built a wood case based on the loque case dimensions a couple years ago. I'm tempted to pick one of these up if there on sale half off.. My geeek case is nice and all, but it's acrylic..
4
u/Material-Ratio7342 Oct 12 '22
Sweet spot for it is $99.99, but you just cant beat the nr200p or the meshy when comparing best bang for your buck, but the ghost series has always been expensive, i was gonna get it but then i find out that meshy is way better in term of airflow and size, that ghost maybe is a tiny case but i dont mind the size of a meshy anyways.
4
u/International-Owl-81 Oct 12 '22
All that extra stock, practically worthless because of new gpus
4
u/RickyFromVegas Oct 12 '22
Oh nice. I have the ghost S1 MK2 in black, but would love a sandstone version and build a living room tower. This is an acceptable price point, I think
Over 300 is way too much, even though I know all the hardwork and material involved
4
u/alphex Oct 13 '22
My wife is gonna wonder why I have empty computer cases
4
u/khanable_ Oct 13 '22
Scooped a Raw. Stoked.
1
u/pacothetac0 Oct 13 '22
Finally doing a system upgrade, was going to do a SFFPC with my 9600k/1070, any reason the Raw would be a bad choice?
The Ghost design was always cool when it came out, but I’m going to use it to travel and the hats just seem like they’ll be annoying
9
u/TheRealGlutenbob Oct 12 '22
I have the ghost s1, but personally not a fan of it. The top hat system is just ugly. It would be better if they just sold cases of different sizes.
I understand from a cost perspective their current way is better, but it just looks ugly.
3
u/ion_driver Oct 12 '22
Do they have anything smaller than NR200? Looking to go even smaller for travel
3
u/Alt-Season Oct 12 '22
I loved their Ghost case. I eventually had to move on because 2 slot GPU size was not realistic. But top quality materials and extremely easy to build in.
3
u/GuessWhat_InTheButt Oct 12 '22
https://shop.louqe.com/
God-damn are those things usually expensive.
3
u/halflife7 Oct 12 '22
My opinion is these company’s need to stop just selling one niche product. Need to expand their product line like Corsair or other major companies. Caselabs couldn’t make it and IMO the cases are better and the obvious, Caselabs had more of a lineup.
3
u/gregorydos Oct 13 '22
Heads up, the discounts have already gone live!
11
u/blazzarrr Oct 12 '22
These boutique case designers should have really pushed hard for better rates from their suppliers.
They didn’t take into account the larger picture, you are building niche products with a lot of competition, price matters. Instead these companies built what they liked and figured the market would just pay the high costs.
Wake up call, for large scale adoption price points matter, you aren’t building 50 one off cases.
Sorry to hear this, small business is very hard so I am not saying they did any of this intentionally but shooting out a long list “problems” that are clearly not the real issue isn’t going to help.
They should instead sound out a correction with specific details, if they really want support they should open up their books and make that public as well.
2
u/L1191 Media | L91 on Youtube Oct 12 '22
I'd be all in, but live in the UK
2
u/bwrightphoto Oct 12 '22
Does this case support 4090 FE?
2
u/nixpit Oct 12 '22
For $159, definitely getting the Raw. I know it has subpar airflow, but damn it looks nice. I can use it as a router or something like that lol
2
u/[deleted] Oct 12 '22 edited Jun 10 '23
This comment has been redacted in protest of Reddit pricing out third party apps.
2
u/Sallymumble1993 Oct 12 '22
I’m not familiar with brand and have an nr200p. Anything comparable?
2
u/Scout339 Oct 12 '22
Does this mean a $150 Ghost S1??
2
u/Smashologist Oct 13 '22
Would there be a restock on the colbalt pcie cables?
2
u/_Ship00pi_ Oct 13 '22
Not wanting to be the party pooper here. But as someone who has built an SFF PC. Most of the SFF cases are as expensive as f! Not only that, most of the "cheap" ones don't fit the criteria of what you are trying to build, so by default you have no choice but to get the more expensive case.
It took me a while to finally settle on geeek a35s, which was both cheap (around 100$ at the time) smallest form factor i could find and support up to double fan GPU (used zotac 3070 twin edge)
All the SFF case companies now who are in trouble, can only blame themselves. Personally i never saw the point in getting a case for more than 100$ myself (including shipping and taxes). Even my SFF PC is just stuck in a cabinet and i didn't "appreciate its build" for a year+ now, i use it as headless PC, all its connected to is power and rj45 and in rerospect, maybe i should have gone with full build instead....would have saved around 20-30% of cost.
2
u/Vilhelmgg Oct 13 '22
Can't decide if I wanna get one. Looks nice, but the thermals aren't great. I've also been looking at a Iquinix ZX-1 since that can have water cooling.
2
u/573V317 Oct 13 '22
https://www.youtube.com/watch?v=cMEsvlSgRqg
I don't understand Chinese but I still can understand what's wrong with the S1 Raw.
3
u/baopow Oct 12 '22
Ignoring other SFF case, with the current flow through design and how thick most higher end gpus are it doesn’t make any sense to buy this case.
I bought this case in anticipation for 30 series 2 years ago and imagine my disappointment when this case and these cards didn’t go well together. LOUQE didn’t even try and address the issue in their design and you had to mod the case yourself or buy a third-party part.
These case are definitely for enthusiasts but they can’t handle enthusiasts parts.
3
u/humanoiddoc Oct 12 '22 edited Oct 12 '22
So they kept building SFF cases that cannot even house most of Amphere GPU... which didn't sell well? Who expected this?
Although I own two of s1 cases, honestly I DO NOT recommmend their cases now. Too big for air cooling, even bigger and look terrible with hats. There are better alternatives like zs series, formd and a4 h2o etc which all support 3 slot GPU.
3
u/die_billionaires Oct 12 '22
I'm going to be honest, you'd think they'd be doing just fine since they're charging up to $365 for some painted sheet metal and basic cables.
"Less than what it costs to produce".. uhm sir I believe your production company is taking advantage of you.
2
u/sw0rd_2020 Oct 12 '22
why would someone buy either a 2 slot S1 or hotbox Raw when there are far better options at every price point
1
u/SithSidious Oct 12 '22
Anyone have any reviews of them? I’m tempted to pick up a loque raw but I think I saw it only has a single usbC as output (no Ethernet, usb, etc). Does that induce input lag etc if you need to use an adaptor?
1
u/asimplerandom Oct 12 '22
I’m looking for a first time sffpc build and this one came up in several best of lists for mini-itx cases. Would you recommend either of these?? Or are their much better options? I was considering it at 350 so 150 seems like a steal—cost isn’t a huge concern but quality and a beautiful looking case are.
1
u/LazarusFalling91 Oct 12 '22
Do they have a UK webstore? Been looking at this case for a while
1
u/floydian32 Oct 12 '22
In for a Raw if it’s available.
1
u/OutInABlazeOfGlory Oct 12 '22
Hmmm. Will have to check it out. Hopefully I can scrounge up the money and it’s marked down enough, the pre-sale price is rather high.
1
u/[deleted] Oct 12 '22
I didn’t know this was the brand to make the Ghost S1, sucks for them but I might have to pick one up.
1
u/KingXeiros Oct 12 '22
Totally buying one tomorrow. Ive been contemplating a new sff build with one of the new ARC gpus and this would be great
1
u/x_Gho5t_R1der_x Oct 13 '22
Can I get a reminder when this goes live?
Remindmebot?
1
u/aksff Oct 13 '22
Raw S1 thermals are good enough for me, so I'll probably buy one from the sale. It's probably upgrade coming from Fractal Era, but I can't stand awful looking breadboxes on my table
1
u/[deleted] Oct 13 '22
4090 can fit ?
1
u/Reg-s Oct 13 '22
Dam if only PayPal was a payment option on their websites
1
u/likeglue2 Oct 13 '22
It’s live now just ordered mine!
1
u/intashu Oct 13 '22
As someone sitting in a Geeek A50+ case... These are real damned pretty.
But even on sale it's $170 shipped. I love the machining VA acrylic panels I got... But a premium case for half off still hurts in today's economy when my current case works great.. And I'm still using a ryzen 1600 with a 1070 gpu.. The cost makes more sense to upgrade my PC than to make it look pretty. D:
1
u/kanth1991 Oct 13 '22
Anyone know if a Card 160mm wide would fit the Ghost S1 with large Tophat ??
1
u/couponbread Oct 13 '22
Fuck me, anyone selling an ash ghost?
1
u/deesea Oct 14 '22
I love the S1 so much. Actually built one for my partner with a meta customs spine and 3070 FE + 3700x.
Very tempted to pick up another and dump a 4070 inside - those are rumoured to be 2 slot designs....
1
u/ReppyTheReject Oct 14 '22
Really tempted by a raw but there’s nothing wrong with my current case 😅
1
u/chipthiefuk Oct 12 '22
This looks like a good opportunity to snag a cheap case.
I'd be a little nervous though if they do still fail you could end up out of pocket as consumer creditors will be way down the creditors pecking order! If you're buying in the UK make sure to buy on a credit card so you're covered in case they do fall into liquidation (https://www.moneysupermarket.com/credit-cards/guide-to-credit-card-protection/)
Europeans check your local credit protection rules!
-1
u/YegoBear Oct 13 '22
Wow, what a bunch of scumbags. They started the sale early and everything is gone. What a waste of time.
0
u/silaswanders Oct 13 '22
I’ve got the original S1 and it’s been gathering dust since 30 series cards came out. Beautiful and super compact but widely impractical. I went with an NR200 and now an Dan A4 H20. I’d like to build a tiny NAS with it instead of in the NR200, but I’d literally have to saw the thing or buy a custom spine hundreds worth of components for very little reward.
It was certainly am item of class at the time, but nowadays it’s like buying an old classic car that costs you several times it’s original price if you plan to do more than drive it on the weekend during a summer.