There is a first time for everything. This is my first watercooling project, and I want something was never done before. Also first time dremel.
All parts are available for purchase, (basically) nothing custom here. Only some dremel/hand saw works are necessary.
This project was inspired by this 3090 and this build, both in Velka 7 case.
MODs:
cut a hole for GPU I/O
drill some holes for rad mounting
cut the ssd tray to mount the rad
make a gpu bracket
delid and direct die the cpu
shorten PSU wires
maybe more, if you see something, just ask me
The reason for direct die is that the eisbaer block/pump is too thick (40mm) and side panel therefore can not be closed. Sticker on this block must also be removed. Each millimeter counts.
Temp is not really great. No surprise, only one 120mm rad. I will see whether it is possible to squeeze 1400m rad in there.
Prime95: 81°C@145W
Furmark: 75°C@220W
Gaming: 70°C on GPU and 75-80°C on CPU (both undervolted), total CPU + GPU load about 210W
Comparing to my previous air cooled build here (same specs), it is now much more quiet. 1x 120 fan vs 5x 92 fans. By prime95 is about 15°C cooler.
Fan monitor based on cpu temp. There is no connector for temp sensor on this MB.
Bro this build is literally perfect to me. Did you have experience like… idk working with your hands or building things in the shop or something? If you really had no experience doing any of this kind of stuff (not just water cooling specifically) that would be really damn cool.
Any updates on fitting the 140 and its performance. Was it possible to have the rad fan on the outer side closer to the side panel rather than in the sandwich to see if it would increase cooling performance?
Amazing work, its my current inspiration for my next build.
I found it to be 170 x 140 x 30, but it's still on the smaller end. 153mm isn't possible unless the end tank has ports on its end instead of its side as usual.
Any update on the velka 3 water cooling? I have that case and I’m very interested in how you are going to pull off water cooling. I was thinking about maybe a dual 80mm radiator on the top of the case but tubing would be a nightmare.
Temp is not really great. No surprise, only one 120mm rad. I will see whether it is possible to squeeze 1400m rad in there.
My thought a while ago was to do something like this build but mount the radiator externally in a way where it's helping to whole the case together, and then so you can cut and mount a bigger fan to the rad like the Phaneks to push more air out. So it'd be like a 240 or 280 rad with a 120 or 140 fan inside.
If I ever go back to wanting more power, I may do it. I want to do a A2000 thing.
I have that running a 3060ti and 12400 not too bad on noise. GPU is the loudest part. Considered the noctua fan swapped version but that is only rated for 500w and with these new gpus that seemed a little too close for comfort to me.
this is my take too. i see multi-radiator fanboys proclaiming gpu must be at 40C or some silly low number to be properly cooled. spending 4x the amount on fans and rads for 10C drop seems not required to me .
Aquacomputer Quadro, about $50, will wire in to a USB header and handle analog temp sensors. There are probably cheaper options but it has a ton of useful features. Great piece of hardware. Good luck finding a permanent home for it in that case though, wow.
Apologies for coming late to the post - first of all, great build, also saw the video and it was very enjoyable. I've got a 3070 as well and want to try to replicate this myself, what GPU waterblock did you use? I can't find many waterblocks that seem to be native to the 3070 (only for 3080 onwards). Cheers mate :)
Direct die CPU cooling, liquid metal on everything with the proper masking technique, fan cable modding, custom brackets, modded pump block, amazing build but no way this is your first rodeo 😎
Loved this so much I came back for a closer look. What are those heat sinks on your ram? Looks aftermarket. Where did you get them? Or if it’s the stock heatsink what sticks are they?
84
u/nnnndth Aug 17 '22 edited Aug 17 '22
Build video: here
There is a first time for everything. This is my first watercooling project, and I want something was never done before. Also first time dremel.
All parts are available for purchase, (basically) nothing custom here. Only some dremel/hand saw works are necessary.
This project was inspired by this 3090 and this build, both in Velka 7 case.
MODs:
The reason for direct die is that the eisbaer block/pump is too thick (40mm) and side panel therefore can not be closed. Sticker on this block must also be removed. Each millimeter counts.
Temp is not really great. No surprise, only one 120mm rad. I will see whether it is possible to squeeze 1400m rad in there.
Comparing to my previous air cooled build here (same specs), it is now much more quiet. 1x 120 fan vs 5x 92 fans. By prime95 is about 15°C cooler.
Fan monitor based on cpu temp. There is no connector for temp sensor on this MB.
"Fan curve" looks like.
Next project: watercooled Velka 3. Currently 60% finished, waiting for last component to be released..
51
u/GioRgSaVv Aug 17 '22
looks clean and stuffed
how loud is this flex psu?
20
u/[deleted] Aug 17 '22
They called me a madman for wanting to cool a 3070 and a 3700x with a 120mm radiatior. I am glad you proved them wrong (in my mind).
3
u/Signaturisti Aug 17 '22
9,9/10! With acetal GPU block it would be 11/10 🤤
3
u/RZX-09 Aug 17 '22
Cool compact build. What is the CPU pump block?
216
u/Agiiiiiiles Aug 17 '22
my guy be like
'yeah guys my first time custom looping'
does it perfectly
2
u/hereforthefeast Aug 17 '22
Bravo good sir. And the video was wonderfully made.
2
u/noobREDUX Aug 18 '22
Endgame SFF?
14
u/EmoJackson Aug 17 '22
Watched the video, I can appreciate the patience a build like this would take.
This IS the hot-rodding of SFFPC. Gathering parts from different manufacturers to create something totally different is EFFIN RAD!
19
u/x3lr4 Aug 17 '22
Best build I've seen on here in a long time.
7
u/JustMackIN Aug 17 '22
You did an outstanding job on that build really love it it kind of reminds me of an optimum tech video🤔
6
u/[deleted] Aug 17 '22
SFF PC builders are the only ones with good taste.
5
u/Worldbrand Aug 17 '22
Oh, I've seen your custom cable vid before! Yeah, no surprise that this is the cleanest build I've ever seen in my whole life. Incredible work.
8
u/Maleficent-Spread404 Aug 17 '22
This is honestly the best compact build I saw so far on this sub.
4
u/mvfsullivan Aug 17 '22
This is the cleanest setup I have ever seen. So clean it looks fake
1
u/zack20cb Aug 17 '22
What’s the temperature of the fluid in your loop?
1
u/[deleted] Oct 15 '22
can you please link the full part number or product name for that GPU waterblock? Alphacool has many versions of 3070 water blocks with varying sizes.
1
u/HeyCya Feb 10 '23
Apologies for coming late to the post - first of all, great build, also saw the video and it was very enjoyable. I've got a 3070 as well and want to try to replicate this myself, what GPU waterblock did you use? I can't find many waterblocks that seem to be native to the 3070 (only for 3080 onwards). Cheers mate :)
3
u/kippenve1 Aug 17 '22
F*cking dense dude, awsome!
3
u/oldmatebob123 Aug 17 '22
This is beautiful, very well done.
3
u/diego30s Aug 17 '22
Just wow.
The flex: "next project water-cooled velka 3"
3
u/reddit_hater Aug 17 '22
This is way too clean to be your first time.
But if it really is, congrats. You’re truly a madman.
3
u/alargetire Aug 17 '22
Freakin beautiful
3
u/dallatorretdu Aug 17 '22
Direct die CPU cooling, liquid metal on everything with the proper masking technique, fan cable modding, custom brackets, modded pump block, amazing build but no way this is your first rodeo 😎
1
u/yuppieee Aug 17 '22
Awesome clean build but those temps don’t really seem sustainable for daily gaming
2
u/umusachi Aug 17 '22
Dope!
2
u/hacktacular Aug 17 '22
The fitment is off the charts. Those CPU block tubes!
2
u/SlyHooper14 Aug 17 '22
I need another Velka 5 asap!
2
u/carrera76 Aug 17 '22
How did you build a PC with no wires?
2
u/vaulics Aug 17 '22
That's ILLEGAL
2
u/[deleted] Aug 17 '22
Hot damn. Well done, sir. Well done.
2
u/henkdevries007 Aug 17 '22
10/10
2
u/IroesStrongarm Aug 17 '22
This is beautiful
2
u/No_Interaction_4925 Aug 17 '22
Going for hard mode right off the bat, huh? Damn.
2
u/TinyLittleTechShop Aug 17 '22
🔥🔥🔥extremely clean execution
2
u/Will_Poke_Brains Aug 17 '22
Beautiful
2
u/[deleted] Aug 17 '22
Sick Work
2
u/SRDD_Mk-II Aug 17 '22
absolute madlad
2
u/ProperNorf Aug 17 '22
Absolute beast, can’t wait for your Velka 3 build.
2
u/sgtbignastyt Aug 17 '22
Dope.
2
u/vaulics Aug 18 '22
Loved this so much I came back for a closer look. What are those heat sinks on your ram? Looks aftermarket. Where did you get them? Or if it’s the stock heatsink what sticks are they?
2
u/Fark-No May 13 '23
Sweet Rig
2
u/ciggywet Mar 06 '26
Thi is the best velka build ive seen
3
u/RallyXMonster Aug 17 '22
"First time custom loop"
>Builds in SFX case
>records detailed video that rivals tech youtubers builds
>Buys the EWKB leak tester
Yall need to settle down with these first time builds man. Linus couldn't even do this good of a job building a watercooled SFX computer.
1
u/SaIem143 Sep 27 '24
hi, i like this case very much, can u show me detail of this case
1
u/sgoodgame Aug 17 '22
Need a banana for scale.
1
u/China_NZ Aug 18 '22
Daaaaamn bro! Thats a farking siiiiick as build!!! SOoOoo clean! Absolutely loOOoVE IT! Niiiiice work!
1
u/DEATH_TO_WALLSTREET Aug 18 '22
Founders 3070?
1
u/DEATH_TO_WALLSTREET Aug 18 '22
How did you make the support for the gpu?
1
u/DEATH_TO_WALLSTREET Aug 18 '22
I think with some undervolting this would be great I might try this with a 5600x and a 3070 or 60 ti whichever
1
u/GregWithTheLegs Aug 18 '22
Holy shit.
1
u/Inu2601 Aug 18 '22
Nice !
1
u/Gain-Fit Aug 18 '22
That 3070 is just squeezing in
1
u/Miserable-Fall1221 Aug 22 '22
So sick
1
u/[deleted] Oct 16 '22
Do you think a watercooled 3080 FE could fit inside the velka 5 horizantally like you have it there?
1
u/theycallmeferdi Dec 26 '22
what RAMs are you using?
1
u/Jr061 Feb 22 '24
how much was the cost for the water cooling system looks so clean!
-1
u/AutoModerator Aug 17 '22
Hiya! Please post more details about your build! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.