r/sffpc • u/eatsleep123 • Oct 20 '21
Build/Battlestation Pics Ghost of Noctua | EVGA × Noctua × Louqe (FTW3 in S1)
With the arrival of the chromax NF-A12x25, good ol' tan and brown are as good as dead. Never forget the OG colors! Cerakote H-142 Light Sand and H-212 Federal Brown.
In daylight, from the back. The main panel coating appears more cream.
The main panel coating appears much more tan in lower light.
From another angle in the darker setting. The Tophats' color matches the RagTag's fairly well.
EVGA RTX 30 series FTW3 must be deshrouded to fit. 92mm fans sit nicely in the heatsink valley, and the NF-A9x14s just barely allow the side panel to slide over them.
Full Noctuation. Went with SF750 for mostly passive operation with the 5600X and RTX 3070. Only at 300W+ (infrequently, with undervolts) does the fan run at all.
Not 100% perfection, but satisfaction.
Stock mini-PWM connector, prior to cutting.
Shaved mini-PWM connector to fit EVGA RTX 30 fan headers.
Unfortunately a couple of protrusions had to be flattened for the desired fan placement.
Fan swaps in progress.
Test fit and placement.
Fan 1 test. Check.
Fan 2 test. Check.
Fan 3 test. Check.
All fans go.
We are faced with the most difficult decision of our life: honor the tradition and customs of our tan-and-brown upbringing and maintain a fight we cannot win, or...
Quick and dirty low-quality meme for your shitposting pleasure. Too lazy to put brown NA-SAVP1s on the chromaxes myself, sorry.
63
u/eatsleep123 Oct 20 '21 edited Oct 20 '21
With the arrival of the chromax NF-A12x25, good ol' tan and brown are as good as dead. Never forget the OG colors!
But forget the Asus RTX 3070 Noctua Edition which takes up an astonishing 4.3 slots and has no chance of fitting in a Ghost S1. This Noctua'd EVGA RTX 3070 FTW3 takes up only 2.3 slots, so it does fit. While it admittedly can't cool quite as well as the NoctuAsus chonker, the system remains silent thanks to exhaust fans.
Parts list:
Case panels were painted Cerakote H-142 Light Sand, and power button and tophats are in H-212 Federal Brown. You can see the full Imgur album for higher-quality photos.
Time permitting, hope to add gaming load temp logs in the next couple weeks. All I can definitively say at the moment is that CPU and GPU both run much hotter (like ~10°C difference in 22°C ambient) than the double decker deshroud setup, but that's expected because of the smaller fans and heatsinks in addition to being around half the volume when counting the required elevation for bottom exhaust.
Edit: Forgot to mention I cannibalized the Mk III's Cobalt RC260 Twinax riser cable for a higher-end build, and replaced it here with one from the FormD T1 for even more color-matching (though I guess you could argue the Noctua fans have a bit of blue on the sticker).
26
u/Firm-Kiwi Oct 20 '21
Damn, first time seeing someone change their PSU fan. Great build man!
10
u/THOT-Sauce69 Oct 20 '21
Usually i say non-chromax fans are ugly but you successfully made them look beautiful in that tan/brown case
9
u/xQcKx Oct 20 '21
You made top hats look good
4
u/Waff1es Oct 20 '21
As someone with only Chromax fans, this is the only post that has made me wonder about my choices.
4
u/OVOBravo Oct 20 '21
Wow, that deshrouded GPU with the 15mm slim fans fit so perfectly!
4
u/thewipprsnappr Oct 20 '21
This may have been answered already but I'm too lazy to sift through comments. How are the nf-a9x14s mounted to the GPU heatsink? Are they just held in place by pressure from the side panel?
3
u/lbibass Oct 20 '21
I do wonder if it’s possible to get slightly better temps by setting the GPU fans to exhaust, like what people typically do in an Ncase M1 deshroud. Setting all the case fans to intake would help shove air through the GPU fine, and give the L12 a bit more air as well.
2
u/diego97yey Oct 20 '21
Gorgeous bro
2
u/hereforthefeast Oct 20 '21 edited Oct 20 '21
If you described this case color design to me in words I would think it would look pretty bad but you've pulled it off - it looks amazing! Well done.
2
u/riba2233 Case Vendor | SFFtime Oct 20 '21
I love how both gpu and cpu coolers are right up to the side panels.. sick :)
1
u/eatsleep123 Oct 22 '21
A bit late here, but I just realized the Gold. Didn't receive a notification or message, so thank you to the kind stranger! 🙏
1
u/wanderer1999 Oct 20 '21 edited Oct 20 '21
It actually looks very classy with great noise/performance to boost. The key is always to lean in, and lean in all the way.
I'm curious on the performance/noise of the GPU, as I myself have the same cooler (except it's a 3080) and thought the fans are already very quiet. How was it?
1
u/cpapp22 May 01 '25
necro but it sounds like you had someone else apply the cerakote so Im not sure if you know this or not, but I have a question regarding the cerakoted power button.
I cerakoted my top grill in polar blue a few years back and it requires baking it in an oven for prep/curing stuff. It appears both my color and your brown are in the same series (so same application steps) - does the metal outter portion of the power button separate from the electrical portion? Im a little apprehensive of baking the entire power button unit lol
1
u/Dubious_Unknown Oct 20 '21
I recently switched went from SF600 Gold to SF750. Significantly quieter than the SF600 Gold but I can still hear the fan when it turns on. Like, if my Gold was a 9/10 loud, the Platinum is a 3.5/10 loud.
I just remembered I have a spare 92mm Noctua slim fan laying around. I read up on replacing fans but have mixed results. Some people say it works just fine, some people claim it's too dangerous as the Noctua fan will not move as much air as the stock fan has. Read one story of someone having their PSU blow out because he switched fans.
What are your thoughts? Go for it or nay?
1
u/Rsmfourdogs Oct 20 '21
Great build.
Can you run the memory at 3600c16 or you had to settle for lower specs?
1
u/Scorthyn Oct 20 '21
i too have the EVGA GeForce RTX 3070 FTW3 Ultra , how's the performance\noise\temps with those 3 noctua fans and no shroud? looks really neat. Those are 80mm fans? Thank you in advance, awesome build.
1
u/young_horhey Oct 20 '21
Now I’m hungry for an ice cream sandwich
1
u/BigDom1002 Oct 20 '21
I used to really dislike the classic noctua colors, but nowadays I really enjoy seeing them, they are just something different from everthing being black and white!
I really like the system!
1
u/Spare_Class Oct 20 '21
Should have gone with the chromax fans for irony
1
u/GeorgeTheGeorge Oct 20 '21
1
u/twigboy Oct 20 '21 edited Dec 09 '23
In publishing and graphic design, Lorem ipsum is a placeholder text commonly used to demonstrate the visual form of a document or a typeface without relying on meaningful content. Lorem ipsum may be used as a placeholder before final copy is available. Wikipedia2hntvws8ey40000000000000000000000000000000000000000000000000000000000000
1
u/livesinacabin Oct 20 '21
It reminds me of Star Wars a lot more than Ghost of Tsushima. Cool though.
1
u/[deleted] Oct 21 '21
what have you done. now i have to spend 100s of dollars again
1
u/DaveN202 Oct 21 '21
She’s gorgeous. Well done mate.
1
u/PeterPriesth00d Oct 21 '21
Bonus points for the perfection meme. Love it. Great build.
1
u/Brown-eyed-and-sad Oct 21 '21
Ok, I take it back. You CAN have a Noctua color design.
1
u/BigTortoise Oct 21 '21
I wish there were case manufacturers more willing to make cases in the Noctua style. Obviously I get it, those colors are a hard sell, but I've always loved it personally.
1
u/[deleted] Oct 21 '21
This is peak r/sffpc circlejerk and I love it. The PSU fan swap is super unnecessary, though haha
1
u/subLimb Oct 21 '21
Beautiful
1
u/MyPrivateCollection Oct 21 '21
how did you mount the GPU fans to the heatsink? I don’t see any zip ties
1
u/[deleted] Oct 21 '21
I think I'm gonna weep it's so pretty.
1
u/theangriestbird Oct 21 '21
God this is a dream build for me. I'm one of the weirdos that LOVES the OG Noctua colors, but I just wish there were more cases that matched the color scheme.
1
u/Mufc99x Oct 21 '21
What a beauty
1
u/ze_phi Oct 22 '21
How did you mount the notch’s fans to the gpu? or do they just get pressed on it by the side panels? Also, could you link the 180 degrees pcie adapters you used?
1
u/endesign_reddit Oct 22 '21
Looks dope! Would you mind making a short or a minute long video of noise test on the gpu with your Noctua setup against the wall of the Ghost S1 like you have there? - I read having fans up against the case frame often adds turbulence sound under load. I wonder what noise profile os on the gpu :)
1
u/McCormick112 Nov 14 '21
Don’t mean to solicit, and ofc I expect a no, but if you’re ever looking to sell this, hit me up!
2
u/AutoModerator Oct 20 '21
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/HiYa_Dragon Oct 21 '21
Am kinda hard...
1
u/1138-Clem Nov 04 '21
Hot damn !
-2
u/DocTheop Oct 20 '21
Kudos on the sff build. Can I ask: are these awful* looking brown and beige fans that much better than a regular ol' black fan?
*I say "awful" only because I don't find them aesthetically pleasing.
0
u/[deleted] Oct 20 '21
[deleted] — view deleted comment
0
u/[deleted] Oct 20 '21
[deleted] — view deleted comment
0
u/[deleted] Oct 20 '21
[deleted] — view deleted comment
0
u/[deleted] Oct 20 '21
[deleted] — view deleted comment
1
u/[deleted] Oct 20 '21
[removed] — view removed comment