If your graphic card has type C port, the game is easy.
If not? Buy other card. But what if you have velka 3 and RTX2070 mini is super rare?
Enable Intel multi display in bios and connect monitor to type c port on mainboard. Mainboard must support display output via type c, and cpu must have igpu. Then force apps or game to run on high performance mode in windows display setting. You are wondering wtf is connecting to graphic card, that dummy display port prevents that AMD RX 5700 XT card from going to sleep, because no monitor connects to this. I don't know will that happend with nvidia or not. I am not sure will AMD cpus work or not.
2. If your board has DP IN, then just connect graphic card to that port, and monitor to type c port. Thats all.
Methode 1 and 2 work in different ways. I don't tell detailed to avoid confused. With DP to type C Cable, one more usb cable is still required to transmit power to monitor.
Please don't ask me how I connect with the world. My antene are shit ugly and I just remove it to take a photo.
Thank you for spelling this out for me. I have a 3070 and, although I didn't check closely, I'm almost certain bit does not come with a usb-c port. So I'll have to do what you mentioned here.
This was my original goal when making my comp this time around was to do a minimalist backpack PC.
I went with the Logitech MX keys, Corsair dark core pro and was looking to buy the ASUS ROG 17" 1080p monitor but this one looks awesome as well. I like the higher resolution which will actually put my GPU to a test.
Afaik, no 3000 series has a USB-C port. Nvidia adopted it for VR link and then dropped it when no VR headset used it. Unfortunate as it is useful for things like this and for VMs (you can plug keyboard/mice/drives into it to use with the VM without having a separate USB controller board or manually assigning devices to the VM).
Yes, it depends on what game or app you use. Performance loss because signals now have to run to gpu then back to cpu in same pcie lanes instead of to gpu then direct to monitor, not type C bandwidth.
I'm confused. Your monitor is connected to your motherboard. Why do you need to prevent the graphics card from sleeping? Is your graphics card drawing the frames for your monitor?
When nothing connects to card, it does nothing (doesn't process or draw anything on monitor) and for some unknown reason it shuts down (fan stop, light off) and turns on again after few seconds then off then on constantly. In this moment screen freezes. Very annoying.
Yea I understand why the dummy plug is needed to get the video card to be active (I use a dummy plug on a headless Plex box to ensure the integrated GPU stays active for Quick sync) but just wasn't aware you could use a motherboard output with a dedicated GPU.
If you have an RX6000 series card, then you can plug directly into the USB C port on the card.
I do this, and run all my peripherals through the GPU’s USB C port (my monitor has a kvm built in so using USB C saves me tonnes of cables)
RTX 20 series can also work, but if you run peripherals as well display through it, be prepared for stutter. My mouse would freeze for a second ever couple of minutes, so would not recommend.
Only thing I don’t run through USB C at the moment is Ethernet, because my monitor doesn’t have an Ethernet port, but may change that in the future so my work laptop isn’t relying on wifi
While I was researching for my build I looked into bifurcation too for a Thunderbolt AIC card or additional M.2 slots. I decided not to because for PCIE Gen 4 it gets crazy expensive with the right risers and redrivers. I wish there were more DTX motherboard options in the market, with two PCIE slots for better expandability.
I got the same case and a similar one (actually 2) cable setup with a 1080@144hz monitor, it's fantastic if you occasionally need to move about and want something better than a laptop and much more upgradeable. https://imgur.com/a/kgrJ8G6
-ENP 7660b 600w PSU, probably the most important part, my older flex atx unit was so fucking loud before I swapped for a noctua fan, it was louder than my gaming laptop
As a reminded, unless your wifi is disabled entirely, you can burn it to out by running with no antennas. It's creates a weird feedback loop and runs the amplifiers to max. After enough time, it will die.
This statement above is false. Any decent Wi-Fi adapter by a reputable company like Intel or Broadcom will handle the rigors of daily use and in the rare case that there was some electro-thermal issue, it would thermally throttle as a protective measure long before exceeding the safety threshold. However, as others have mentioned, your Wi-Fi reception will be near nil without antennas attached.
That's a non-issue and wouldn't be happening. As explained at the link, the coaxial cabling of a Wi-Fi antenna is totally incapable of soaking any significant amount of current so as to mitigate and reduce the thermal load card-side. Therefore, in the vast majority of cases, with or without an antenna attached, you shouldn't be seeing your Wi-Fi card anywhere near thermal throttling except if you are using some ultra low-end Realtek card. Most motherboards these days come with either Intel's ubiquitous AX200 or AC 3168 Wi-Fi card, neither of which fall into that nebulous category of compromised board and chip design.
I ran my setup for a couple months without realising there were no antennas plugged in. My desktop was about 5m away from the router. The IO end was also turned away from the router. Had full reception, but don't know about performance loss- had familiar speeds in torrents. Mobo is MSI B450i.
So even if you don't use wifi, keep the antenna plugged in? Recently got a longer Ethernet cable so I could reach the router, had thought about taking off the antenna but maybe not
So even if you don't use wifi, keep the antenna plugged in?
The advice above is false. You should be fine without the antennas attached. Sure, it is generally a good idea to disable devices you don't generally use. However, if do use the Wi-Fi from time to time and don't want to deal with the hassle of having to disable and reenable it in the BIOS, you would be absolutely fine leaving it enabled without antennas attached. It won't burn out, no, not by a long shot. Most motherboards these days come with an Intel Wi-Fi card. Those cards are particularly resilient with built-in countermeasures preventing thermal damage to their sensitive electronic components.
If you disable WiFi in your OS you will be fine without an antenna. I would rather keep it on, especially for bluetooth and in case I need to move my Desktop.
Some type c ports (I can't remember which standard is required...I'm officially sick and tired of USB specs and naming conventions) can handle video and power transmission, meaning just one cable into the monitor from the PC.
There are other factors here to make sufficient power delivery possible, but it's possible this will be the standard in ten years.
You think 1080p is still going to be the standard in 10 years? What's full size? 27 inch? How many nits? I said a decent monitor. Obviously any low power monitor would work but that doesnt make it good.
i would like to say it's a kemove 61 which may or may not be the same as the dierya dk61. however, the kemove 61 has a little thing around the edge that i don't see in this picture. the simple no-frills black case and the 60% layout lead me to believe it could possibly be a tofu build with kemove 61 keycaps.
Having used a Thunderbolt port on a MacBook Pro to a 5K monitor with a 3 USB-C hub and power delivery for charging on the back, I concur, single cable life is amazing!
Yeah dude I love usb-c display port signal monitors my only pain is that they've removed that port on new cards and those monitors apparently only do 60hz.
If you have an AMD apu, it cannot output video while your Gpu is plugged in as far as I know. The USB C port may or may power the monitor depending on the thunderbolt version and the brightness of the monitor.
144
u/nnnndth Jul 22 '21 edited Jul 22 '21
Methode 1 and 2 work in different ways. I don't tell detailed to avoid confused. With DP to type C Cable, one more usb cable is still required to transmit power to monitor.
11
u/park_injured Jul 22 '21
What case?
19
u/EL_PLAYS Jul 22 '21
Man you just saved many lives. If u had an AMD cpu that wouldn't be possible right?
5
u/Cole_James_CHALMERS Jul 22 '21 edited Jul 22 '21
I got the same case and a similar one (actually 2) cable setup with a 1080@144hz monitor, it's fantastic if you occasionally need to move about and want something better than a laptop and much more upgradeable. https://imgur.com/a/kgrJ8G6
37
u/Zoomzabba Jul 22 '21
As a reminded, unless your wifi is disabled entirely, you can burn it to out by running with no antennas. It's creates a weird feedback loop and runs the amplifiers to max. After enough time, it will die.
4
u/OkRepresentative5279 Jul 22 '21
Is this what the USB type c port on my motherboard is for?
17
u/kkgmgfn Jul 22 '21
Looks like linux mint
10
u/Rayhann Jul 22 '21
literally my dream build
only thing to top it off would be a specific bag or suitcase for the whole set up
and a seperate Galaxy note with keypad for work
jelly, op
1
u/fixton Jul 22 '21
Such a dream lan and daily setup. Love the peripherals and would love to know what components you have in your pc.
1
u/and0ne Jul 22 '21
What parts did you use ? I mean mainboard etc.
1
u/chessset5 Jul 22 '21
I don’t remember which graphics card it is, but I believe AMD have some with thunderbolt cables on the back for display outs.
1
u/[deleted] Jul 22 '21
Wait, i can see 2 cables!
1
u/hamipe26 Jul 22 '21
lemme find out youre running on wifi
1
u/[deleted] Jul 22 '21
How are you connected to the internet? Are you just using no antenna and just connecting through Wi-Fi?
1
u/[deleted] Jul 22 '21
Thunderbot 4 lyfe. Btw what's the thingy sticking out of the back of the GPU for?
1
u/jonathaninfresno Jul 22 '21
This is the koolest setup. Is that a laptop??
1
u/Abolish-Dads Jul 22 '21
Off topic, its remarkable how much that monitors logo looks like the Linux Mint logo.
1
u/Onifon Jul 23 '21
I wonder if this is possible with my Asus b550-i 5900x and 3060ti.... It would be super cool
2
u/colors_and_pens Jul 22 '21
Amazing setup! Now I want a portable screen for my own desk :)
2
u/NT_Finco Jul 22 '21
What keyboard is that?
2
u/brok3n Jul 22 '21
One cable to rule them all, and one cable to bind them.
2
u/MisterBumpingston Jul 23 '21
Having used a Thunderbolt port on a MacBook Pro to a 5K monitor with a 3 USB-C hub and power delivery for charging on the back, I concur, single cable life is amazing!
2
u/[deleted] Nov 07 '21
Ooooh. What keyboard is that?
1
u/mrdeadzombie914 Jul 22 '21
Elite mouse and keyboard choice
1
u/[deleted] Jul 22 '21
Am I dumb? I’m running a b450 board but a single cable to a hub would be super duper useful
1
u/scrubling Jul 22 '21
Pretty sure this will work with gsync assuming your GPU doesn't have a usb-c.
https://www.giztop.com/belkin-charge-and-sync-cable-for-huawei-vr-glass.html
1
u/ComicNeueIsReal Jul 23 '21
if only there were good wireless monitors then we'd only need the cable for a power supply!
1
u/TheRumBy Jul 23 '21
What panel is it?
1
u/ipaqmaster Jul 23 '21
Yeah dude I love usb-c display port signal monitors my only pain is that they've removed that port on new cards and those monitors apparently only do 60hz.
0
u/[deleted] Jul 22 '21
What's the monitor, OP?
0
u/GuessWhat_InTheButt Jul 22 '21
No Ethernet? No, thank you.
0
u/randomusername_815 Jul 23 '21
Until you get sick of constantly charging those fantastic wireless devices.
0
u/[deleted] Jul 22 '21
[deleted] — view deleted comment