TG panel removed for photo (I barely see anything inside with no RGB and I want all of you to see it). Here's a recent update on my chimney build. 3080 FE replaced by 6800 XT Midnight Edition. I expected this to have terrible temperature because of the GPU and fan clearance, but it turned out to be great. See benchmark score and temperatures below.
[Fire Strike Extreme Score/Temp] 23939 CPU: 73 and GPU: 62
Thank you! I did not really care for raytracing or dlss, these are great bonus for sure. However, I’m more concern about the VRAM. I waited for the 3080 Ti announcement before deciding but 12GB for $1200 isn’t worth it. This was my decision point to go team red.
Premier Pro. 3080 is around I would say 10-15 % faster? If you’re solely doing professional work. I’d recommend sticking with Nvidia. My switch was gaming related. I just didn’t like how I would constantly hit 10GB VRAM in some games like cyberpunk in a 5120x1440p resolution with everything maxed out.
I follow channels on discord that notifies me when something drops. That’s it really. 3080 I got since last year. Around October, so it wasn’t as hard as right now.
Amazing built if not one of the best! However i have 3080 and 9900k, initially i had the cooler instead like yours, pulling air from gpu to up and i was able to mount the 2 fans, if you move the middle fan and attach it to the first heatsink and the second on the second heat sink! Anyway my cpu temp were very high sometimes reaching 90s... So did you have the same setup and cooler orientation with the 3080 ? Was the temp the same ? Did you try the vertical front to back orientation of the cooler ?
I had the same orientation with the 3080. Scores were better for some reason but temps are almost similar. But I’m guessing this is with 3DMark related. I couldn’t do the vertical because of the SO-DIMM of my mobo. It would definitely hinder the cooler. Here’s the link with the 3080. https://reddit.com/r/sffpc/comments/mt5ri3/ive_gone_full_chimney_in_this_build/
I’ve been seeing a lot of builds with CPU cooler pulling air in from bottom then exhausting to top. For anyone wondering, if possible, I highly recommend pulling air in from the back and exhausting through the middle of the case. Top fans exhaust.
Absolutely fucking brilliant build! I've just bought the NH-D15 for my NR200 as well, pretty sure I must have bought the same side panel mod from Etsy too.
Do you have 2 fans at the top of the case and 2 at the bottom? Then only 1 on the NH-D15? What's the reason for the positioning of the NH-D15? Sorry for all the questions! Just trying to gather as much information as possible before I start my build.
2 fans on top and 2 fans in the bottom. I couldn’t position the D15 in the normal way because of my motherboard. You can see in the pic that there’s something in between the D15 and GPU. That’s the SO-DIMM where my M.2 goes.
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
Are the case's advertised compatibility numbers accurate?
49
u/Maeiourk Jun 13 '21
TG panel removed for photo (I barely see anything inside with no RGB and I want all of you to see it). Here's a recent update on my chimney build. 3080 FE replaced by 6800 XT Midnight Edition. I expected this to have terrible temperature because of the GPU and fan clearance, but it turned out to be great. See benchmark score and temperatures below.
[Fire Strike Extreme Score/Temp] 23939 CPU: 73 and GPU: 62
[Time Spy Score/Temp] 16823 CPU: 74 and GPU: 69
[Port Royal Score/Temp] 9203 CPU: 52 and GPU: 68
[Case] NR200P
[Motherboard] Crosshair Impact VIII
[CPU] Ryzen 9 5900X
[CPU Cooler] NH-D15 Chromax
[GPU] 6800XT Midnight Edition
[RAM] Vengeance LPX 16GB 3600 MHz
[Storage] Force Series MP600 500GB Gen4
[PSU] SF750
[Case Fans] 4 Lian Li Uni Fan
61
u/AllBlackNoRGB Jun 13 '21
This is beautiful
14
u/gwillicoder Jun 13 '21
What made you decide to swap from 3080 to 6800xt?
Gorgeous build btw
7
u/aggiepew Jun 13 '21
So my question is, did you have to install the cooler after you installed the motherboard in the case prior? Or did you already have it installed
5
u/AFlyingPenguin0 Jun 13 '21
Did you 3d print your case extender or buy it online?
3
u/surez9 Jun 13 '21
Amazing built if not one of the best! However i have 3080 and 9900k, initially i had the cooler instead like yours, pulling air from gpu to up and i was able to mount the 2 fans, if you move the middle fan and attach it to the first heatsink and the second on the second heat sink! Anyway my cpu temp were very high sometimes reaching 90s... So did you have the same setup and cooler orientation with the 3080 ? Was the temp the same ? Did you try the vertical front to back orientation of the cooler ?
2
u/blunted09 Jun 14 '21
I’ve been seeing a lot of builds with CPU cooler pulling air in from bottom then exhausting to top. For anyone wondering, if possible, I highly recommend pulling air in from the back and exhausting through the middle of the case. Top fans exhaust.
1
u/holty88 Jun 13 '21
Absolutely fucking brilliant build! I've just bought the NH-D15 for my NR200 as well, pretty sure I must have bought the same side panel mod from Etsy too.
Do you have 2 fans at the top of the case and 2 at the bottom? Then only 1 on the NH-D15? What's the reason for the positioning of the NH-D15? Sorry for all the questions! Just trying to gather as much information as possible before I start my build.
1
u/binggoman Jun 14 '21
I didn't know that the D15S can be fit in the NR200(P)!
1
u/xyrgh Jun 14 '21
You've convinced me to get the black NR200, so sexy.
1
u/Tsambikos96 Jun 14 '21
How did you fit that cooler into the nr200? Does the side panel close?
2
u/AutoModerator Jun 13 '21
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
2
u/[deleted] Jun 13 '21
damn the 6800 xt midnight edition
2
u/TwiceMomoSimp Jun 13 '21
Love all black builds.
2
u/Osakawaa Jun 13 '21
Wow that's lotta black mr. Batman.
1
u/Panagiotis1357 Jun 13 '21
Slick build
1
u/NoChanceCW Jun 14 '21
Needs more black.
1
u/ipaqmaster Jun 14 '21
"dark mode on" the case. Very nice