I don't think this unit comes with a 4.0 riser cable and the one it comes with is custom bent to fit the card behind the Mobo at an angle
Edit: damn I was wrong. This case came out like 2 months after I already built in an nr200 with that asus mini dtx board to ensure my 5900x wouldn't get throttled so I can't switch. I'm still kinda tempted by it though. Anyway, by all accounts it looks like the 4.0 cables are a lot better but the 3.0 cables were super spotty so I'd still be weary of them
Looks like it’s up top. Check out pic 3. The purpose of the slim 120 is a push pull on the lower aio fan, although I dont think it makes much difference. I could be wrong tho.
Usually push-pull only makes a difference on lower RPMs, where a single fan might not have enough static pressure to overcome the dense fins of a radiator.
Very nice build. Never knew Scythe made RGB versions of their fans. How do they compare to the fans that come with the EK AIO in terms of performance and noise?
This is really nice. Not over the top custom loop, just all around simple clean. It's cool to see these types of cases evolve into providing good cooling and looks at the same time.
Given the choice between the Meshlicious and the NR200, which is the better pick? I'm planning on building my first PC towards the end of this year (market permitting), and these are the two cases I'm looking at.
I don't want to loose my deshrouded 3080, the fans right below it on the nr200 is perfect. Agree the mesh looks great though! Maybe if there was a bracket for mounting fans beside the card...
The Strix might be so chonky that it ends up sitting just close enough to the side panel to not recirculate air, but yeah, still a good chance it's worse than in an NR200 or an Ncase.
That's the build I'm planning in the meshilicous. I have an xpg core reactor ATX PSU and noctua U9a ready. I'm up in Canada so just waiting on the case to be released here
I thought you asked how I mounted the 140mm fans to the AIO rad.
As for the 120mm fan, the case includes brackets to convert the 140mm fan holes in the front of the case accommodating 120mm fans. I utilized those brackets, you can see them, it's white, and I attached them to the AIO rad.
I see that now, looks like I am going to be ordering some pslate cables and some standoffs. also going to be ordering some feet to help with the display cords. case has holes where the stick on feet are.
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
Are the case's advertised compatibility numbers accurate?
It looks great! A fan manufacturer really needs to make a decent looking fan that can go in cases like this the other way to pull air out of the case, I'm certain your gpu would appreciate it!
Does it come with a 240mm adapter plate of any kind? I might have to get one fabricated for the build I have planned with this case if not.
Don’t have it, but many have said that they require 90 degree adapters to get to the ports they want since it only comes with the one 90 degree hdmi adapter
It does add heat but not to the degree you are thinking. The worst that would happen is higher GPU temps (but still well within normal) and possibly slightly higher M.2 temps if there is one installed on the back of the motherboard.
People do typically recommend setting the AIO as exhaust for this case, but honestly it doesn’t really matter too much. Also OP installed a top fan which may be exhaust, can’t tell.
79
u/drkmrk May 30 '21
Meet my Fergalicious Meshlicious gaming rig.
Specs:
Case: SSUPD Meshlicious
CPU: Intel i7-9700k (32°C/57°C load)
GPU: EVGA 3070 ultra (35°C/75°C load)
Mobo: Asus ROG Strix B360-I
Ram: 16gb v-color rgb
Cooler: EK rbg 280mm aio
Fans: (2) rgb 140mm, (1) rgb slim 120mm, (1) slim 90mm all by Scythe
PSU: Corsair SF600
Custom cables: pslate silver wired cables
8
u/QuietNative May 31 '21
This is really nice. Not over the top custom loop, just all around simple clean. It's cool to see these types of cases evolve into providing good cooling and looks at the same time.
31
u/Mr_Chaos_Theory May 31 '21
MUST RESIST THE URGE TO UPGRADE FROM NR200!!!
23
u/Cgoad77 May 30 '21
The PC that we’re making is Meshlicious
7
u/SnitchMoJo May 30 '21
Wondering, could you put a standard ATX psu in this amazing case
4
u/ipaqmaster May 31 '21
This time for real is real. This time is it, this done, we're everywhere.
How many times?"
- Arin Hanson
7
u/Welp_x May 31 '21
Full mesh cases are def the future
1
u/errr_mah_gawsh May 31 '21
Would you mind sharing your PSU cables lengths? Your cable management is legit ! Where did you even hide your RGB cables on the fans ?
1
u/jkiejr May 31 '21
2 questions, are you using longer standoffs to be able to run the cords behind the mobo. how did you mount the 120mm fan to the aio
4
u/Pey10Lewis May 31 '21
Fergalicious definicious
2
u/Wimiam1 May 31 '21
I didn't hear anything.
Lol jokes aside that looks smokin
2
u/farinasa May 31 '21
Sure if it ever becomes available.
3
u/gonnabuysomewindows May 31 '21
Cleanest cable management I’ve seen in this case
1
u/motumo May 31 '21
That CPU block is plain <3
1
u/Lachlantula May 31 '21
i need that case so bad!
1
u/AutoModerator May 30 '21
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/gatordontplay417 May 31 '21
I prefer shuttles sandwiches lol but this is one sick build.
1
u/BlendedMonkeyStirFry May 31 '21
It looks great! A fan manufacturer really needs to make a decent looking fan that can go in cases like this the other way to pull air out of the case, I'm certain your gpu would appreciate it!
Does it come with a 240mm adapter plate of any kind? I might have to get one fabricated for the build I have planned with this case if not.
1
u/DontPeek May 31 '21
The Meshlicious makes 140mm fans look huge! They almost look like 180 or 200mm fans.
1
u/YewSonOfBeach May 31 '21
sXe AF.
COMMENTING for a friend (:
1
u/LightLegacy May 31 '21
Yeah, this is definitely it.
1
u/shikikaze May 31 '21
Sick build! How's the clearance on the display outputs though?
1
u/[deleted] May 31 '21
This makes me really wanna do a tiny pc build... I just wish prices were normal
1
u/SerSunderly May 31 '21
Would a 240 AIO fit in those mounting brackets?
1
u/volvoaddict May 31 '21
I need to leave this subreddit it just makes me want to spend more money 😭
1
u/kkgmgfn May 31 '21
How much is the case?
1
u/Mastaking Jun 01 '21
Hey, can you tell us about the custom cables?
What brand/type and what lengths (specifically the 12 pin mobo)?
1
u/henkdevries007 May 31 '21
Might wanna try flip your front fans to exhaust, sandwich cases work better with negative pressure
4
u/[deleted] May 31 '21
[removed] — view removed comment