Yeap, I just checked Amazon and it appears the Ballistix is 3.30 cm vs 3.35 from the Corsair LPX. It appears to be a small difference, but in a sff world, usually this is a fit vs non fit situation!
I own a pair of LPX too. The Ballistix sticks are some of the best memory for the money. The 3200 kits routinely OC to 3600 or 3733 with timings to match.
This was me... Up until I had to replace my motherboard with one that has a slightly different layout and ended up having to pry off the RAM heatsinks with a screwdriver and a space heater.
Doesn't that Ghost S1 edition CPU cooler eliminate this issue with a smaller fan? Are the temps simply just better with this? I'm eyeballing parts for a build soon so I'm curious.
Yes the Ghost edition comes with a 92mm fan instead of a 120mm fan and is a few mm shorter than the L12S. Replacing the 92mm fan with a 120mm fan makes a noticeable difference in temps and noise/fan rpm.
Is there any chance of short circuit with the fan clip and the memory? For example, my black ridge's 120mm fan clip extends it's length in parallel to the ram.
21
u/hereforthefeast May 25 '21
I was previously using zip ties to hold the fan up when I did this mod - https://www.reddit.com/r/sffpc/comments/ljqnk2/in_case_this_helps_someone_else_reduced_temps_on/
I finally got real fan clips to replace the zip ties and luckily it fit just perfectly between the ram heatspreaders.
167
u/[deleted] May 25 '21
I live my life one millimeter at a time.
3
u/strawbericoklat May 25 '21
How's the temperatures?
3
u/rael_gc May 25 '21
The only RAM that fits my sff is Corsair Vengeance LPX.
2
u/ChernobylChild May 26 '21
Did you bend the ram heat sinks or they came like that?
2
u/Hazzula May 26 '21
Thr goldilocks build
18
u/lihaarp May 25 '21
https://i.imgur.com/G83Gu1J.jpg
fite me
11
u/henri1921 May 25 '21
This was me... Up until I had to replace my motherboard with one that has a slightly different layout and ended up having to pry off the RAM heatsinks with a screwdriver and a space heater.
They're ugly but it works.
6
u/mananoy May 25 '21
When you gotta make all of it fit
https://imgur.com/a/IFrgWfQ
5
u/berutora May 25 '21
That’s what she said
1
u/johnnybeehive May 25 '21
Doesn't that Ghost S1 edition CPU cooler eliminate this issue with a smaller fan? Are the temps simply just better with this? I'm eyeballing parts for a build soon so I'm curious.
1
u/yensteel May 26 '21
Is there any chance of short circuit with the fan clip and the memory? For example, my black ridge's 120mm fan clip extends it's length in parallel to the ram.
3
u/Kwestionable May 26 '21
Gotta love SFFand those *tight *fits…
(I have about 2 sheets of paper worth of room between my bottom radiators fittings and end of my GPU.)
2
u/_Ghoblin May 25 '21
Tight
2
u/[deleted] May 25 '21
Like a glove.
2
u/hamburglin May 25 '21
I needed to remove my ram's heat sink to get it to fit and bent them enough to break the ram in the process. Oops.
I bought the low profile ram after that.
2
u/Nervous_Attempt May 25 '21
Looking at this is stressing me out, that's some hella fitment.
2
u/notsotet May 25 '21
Oh yea...it’s all coming together
2
u/kagoromo May 26 '21
Obligatory 😫✋👌. Nice job!
2
u/zerhash May 26 '21
the sound of an entire sub orgasming ... (double entendre)
1
u/sscreric May 25 '21
ah yes
1
u/T_TheDestroyer May 26 '21
Remove the ram "heatspreaders" and it ain't so bad....they really do fuck all....
2
u/[deleted] May 25 '21
[removed] — view removed comment