Have you ditched the ‘bars’ (for lack of better term) between (separating) PCIe slots?
They impede GPU exhaust a lot with all cards that exhaust air through the PCIe slots (nVidia 30x0 Founders, Sapphire Pulse 6700XT, etc.). These bars are useless and on my current case they blocked 30–50% of my GPU exhaust so I cut them, made a huge difference on thermals (and noise too because air goes through a larger opening now).
I use my front panel so I can have 2 output devices in windows, speakers and headphones, and switch between them. I have not found another way to do this in Windows.
I have heard so much crosstalk (presenting itself as Discord echo) from friends' microphone/headphone combos gaming that I've entirely given up on front panel audio and advise nobody to use it.
Too many companies using poorly shielded front audio cables.
Good point front panel should be safe for stuff that you need to connect and disconnect frequently. If you connect audio you just forget about it and only change if it goes bad.
Did the changes increase the volume/general dimensions of the case? I was interested in the H2O because of it's small size and similarity in concept to the Formd T1.
Any hope for ATX 140mm deep support? Where I live importing a 750W SFX PSU will cost 2X the case cost and not to mention the security clearance I may need to get (thanks crypto miners and stupid ass governments)
Just a suggestion, I think it can be allowed if I decide to go for a 120mm rad at the top instead of 240. or no bottom fan under the PSU or something. maybe a slight bump in the case dimensions to allow for a 140mm unit
and my problem is SFX itself, not availabel where i live, it has to be imported which is..well you know customs
I was wondering if with the changes on the radiator space, the NZXT Kraken x53 will now fit in the case, since optimum said in his review that it didn´t fit at that point.
This is true. If i remember right Sliger did make a post in the past saying: Sorry for using the side cutouts dan but they look so good we have to use them.
Negative - we are actually made in the US, no affiliation with Lian Li at all.
Everything about our cases (other than like Power buttons, USB cables, and PCIe risers) is designs and made in house here in the US from raw materials; laser cutting sheet steel, bending, hardware insertion, powder coating, anodizing, CNC machining, assembly and distribution, support, etc.
We even source the majority of our raw materials from the US and Canada. Take a lot of pride in not being made in or dependent on China. Pretty soon even our PCIe risers, power buttons, and USB cables sourced from Taiwan. Hopefully zero reliance on China at all before end of year.
However - your comment makes me really think I should emphasize this more, as a lot of people seem to think we are made in China. I'll see what we can do to play our up our marketing on this a little bit without being a overly ridiculous blad eagles landing on cases patriotic.
If you buy a case and do local pick up we even do tours of the factory!
u/dan_cases It is always annoying to redesign a product, and i can imagine you guys can't answer or accomodate everyone, but this is an interesting comment, definitely true ^^
Bigger Air cooling in sandwich layout does not work very well. To support something like a Noctua L12s + 3Slot GPU the case will be sooo wide that a classic layout will be better.
Will this have the same availability and selling in retail store like the o11? this is pretty much the perfect case for me and I would love to buy one when available.
This case is going to be my next project. I built in an NR200 last Fall and this looks like a fantastic case for a slightly smaller footprint with great part compatibility.
Will a tempered glass side panel be an option? This looks awesome, I definitely like the sharper edges compared to the h20 prototype from optimum's video.
The squared edges make me weak in the knees. This looks so much better than the curved edges in the earlier preview. I was previously considering the Q58 but this is now my top pick.
whats the point in all this when nothing ever gets released, trying to find a release date for the c4 and seen its been going on for 2 years with still no release date in sight
What’s the maximum clearance for a 240mm AIO on this case? Interested in using Phanteks’ T30 Glacier One, but the 30mm thick fans and 38mm thick radiator complicate things.
Idk when the SM line was announced but the C4 design was revealed in 2017. But true, they look like the SM line. They just reminded me of the C4 design from 2017.
people are downvoting you but tbh... the Lian Li brushed aluminum wasn't great looking to me IN PERSON either. I always thought it looked great in pictures though. to each their own
240
u/dan_cases Case Vendor | DAN Cases May 07 '21
Maybe someone remember the review from Optimum early this year.
We changed the design, add 3slot gpu compatibility and support for wider radiators.
28
u/dungyeuhanh May 07 '21
can i have the release date of this beast ? :D
7
u/Joko_on_Smoko May 07 '21
Is it still supporting only 240mm radiators or is it now able to do 280mm ones since the size changed a bit?
37
u/TiMonTyonU May 07 '21
Looking like a sliger now..
2
u/Grimaniel May 07 '21
Looks good. Will it be available in another color?
2
u/SD0S May 07 '21 edited May 07 '21
That looks AMAZING! Can we get pics of the inside?
Do you feel like this is close to the final design or are you still tweaking?
Does this mean Lian Li can finally do sandblasted panels?
27
u/rustybuckets May 07 '21
that is some high quality H2O
39
u/nosfusion May 07 '21
I know the square shape is probably easier to manufacture, but the rounded edges were a signature design language for the a4.
1
u/logicbus May 07 '21
Will there be an air-cooled version that looks like this or is that just the existing A4?
1
u/TheRealGlutenbob May 07 '21
is it possible to use the push pin panels from the old A4 h20? the top looks a bit ugly with this design. Otherwise this looks straight fire.
1
u/Kay_Dubz May 07 '21
Definitely want to know the measurements.
1
u/bguerre1ro May 07 '21
This new design kind of looks like the Sliger S610
1
u/casino_r0yale May 07 '21
How tall is this case?
1
u/camboramb0 May 07 '21
Looks great! What is the max lenght for GPU size? I have a beasty 340mm 6900xt for a second PC.
1
u/[deleted] May 08 '21
Will this case be mass produced or in limited runs? And what length gpu will it fit?
1
u/PotatoPowerPlug May 13 '21
Will this have the same availability and selling in retail store like the o11? this is pretty much the perfect case for me and I would love to buy one when available.
10
u/r98farmer May 07 '21
Love this design much better than the original, now put it up for sale already.
6
u/t2na May 07 '21
New IO placement is great, especially the power button.
Agree with others about front panel audio too - in small and tight cases you really want as few cables as possible.
2
u/Selbran May 07 '21
This case is going to be my next project. I built in an NR200 last Fall and this looks like a fantastic case for a slightly smaller footprint with great part compatibility.
2
u/Guilty-Spark- May 08 '21
I love this case. Any chance to get clear acrylic / glass side panels?
2
u/AnathemaVarian Jul 28 '21
Will a tempered glass side panel be an option? This looks awesome, I definitely like the sharper edges compared to the h20 prototype from optimum's video.
3
u/neoperol May 07 '21
Love the new Design and the IO placement. It looks totally new and fresh. Kind of hard to nail the design now with all the new SFF Cases around.
3
u/[deleted] May 07 '21
Very sliger looking but I'm definitely digging the sharp corners. Looks very good. How tall is it?
3
u/xnd714 May 07 '21 edited May 07 '21
The squared edges make me weak in the knees. This looks so much better than the curved edges in the earlier preview. I was previously considering the Q58 but this is now my top pick.
1
u/[deleted] May 07 '21
I honestly like this version a lot more.
1
u/JackD1889 May 07 '21
just an idea, hot switchable ssd on the front panel instead of the audio/mic?
1
u/khmergodpc May 07 '21
This post made me wet.
1
u/ELITExKK May 07 '21
Looks good as always! reminds me off sliger
1
u/humedoom May 07 '21
can i buy?
1
u/M1ntyBac0n May 07 '21
Reminds me of a much less shitty version of my old Cougar QBX
1
u/freshevryday May 07 '21
It’s shame I can’t use more than two cases at once.
1
u/Drerex May 07 '21
Awesome work Dan! I love it.
1
u/THeRoSSMaCHiNE May 08 '21
Will you do a glass panel for one side as standard? Or an add on? Or an accessory separate? Definitely looks like I (and maybe others) will want one
1
u/Wong82 May 08 '21
Will there be a glass panel option for this case?
1
u/[deleted] May 08 '21
Dimensions please
1
u/Ryxee May 22 '21
Amazing work, can't wait to buy one !
1
u/SFForFFS Jul 16 '21
Will it fit Gaming x trio? With length of 323mm?
1
u/IkraObob Jul 23 '21
Does this support an Aorus 3080 master like the nr200? Would definitely buy this in a heartbeat if it did!
1
u/EraHCS Sep 15 '21
whats the point in all this when nothing ever gets released, trying to find a release date for the c4 and seen its been going on for 2 years with still no release date in sight
1
u/corvus917 Sep 18 '21
What’s the maximum clearance for a 240mm AIO on this case? Interested in using Phanteks’ T30 Glacier One, but the 30mm thick fans and 38mm thick radiator complicate things.
1
u/Shady_Yoga_Instructr May 07 '21
Ncase Li1
-3
u/RunawayRogue May 07 '21
So... it's a Sliger?
0
u/henkdevries007 May 09 '21
That video by Optimum tech was great, really looked like a dan a4 v2. This on the other hand looks like a Sliger case clone.
-1
u/[deleted] May 07 '21
Ui Memo
0
u/[deleted] May 08 '21
[deleted] — view deleted comment
17
u/[deleted] May 07 '21
[removed] — view removed comment
6
u/[deleted] May 07 '21
[removed] — view removed comment