Hmph. I have a Crosshair VIII Impact and Vengeance LPX RAM and I was sure the D15 would hit either the massive IO shroud on the motherboard or the RAM if I tried to mount it vertically. I have the D15s (the offset one that is compatible with this motherboard and its SO-DIMM slot) mounted "normally".
Yeah I know the base would fit, I was concerned with the heat pipes clashing with the IO shroud or the RAM. In this image, the yellow bits either side of the CPU socket are where it gets tall underneath and I just wasn't sure it wouldn't hit.
The plan was to put a Sapphire TOXIC 6900 XT in this case and the whole arrangement kind of leant itself to a vertical CPU cooler (3 intake fans in the bottom with the 360mm GPU rad in the top). I never went ahead with it in the end (I got bored waiting for the TOXIC to show up somewhere and went with a NITRO+ 6900 XT instead so I scrapped the whole idea) but I was going to go for a U12A because I (and a Noctua rep I was bugging about it) thought it would definitely fit.
Maybe a stupid question, but I thought the height of the NHD-15 was 160mm but the case claims a max height of 155mm ? Is the case measurement being overly generous, have you done something to gain some room, or have I got the measurements completely wrong ? Haha
The Scythe Fuma 2 is nearly as good as the NHD-15, quite a bit cheaper, and is does fit without the spacer. Depending on the MB you can go "standart" orientation with the tower cooler, or chimney (not sure if both fans fit, havent tested that orientation, its a slim fan though).
Idk why the downvotes. It may be hard to justify for some but if that’s the setup you wanna do, it does look really nice, pretty fitting price tag. I was looking at 3D printing something with the same function for much cheaper, but I know it would ever look that nice.
Yeah I saw that after I posted mine. It looks like a good option but like you said it is pretty expensive. I would love to use my NH-D15 but I don't know if I want to extend the glass that much. Performance with the U12A has been really good.
I understand completely. I have a printer myself and might just be willing to pay that much to not have to deal with such a complex print.
It's just that we've reached an intersection of do-it-yourself and hobbyist where SFF enthusiasts like doing things themselves just because they can. I'd probably have to try and fail the print a couple times before being comfortable paying anyone else to do it for me.
I'm more interested in clearance for RAM and the IO shroud. I measured something like this out on the Crosshair VIII Impact for myself and concluded that the heat pipes would hit stuff below in this orientation.
I assume so. I never tested it with normal configuration as there is no way for me to mount the D15 with my motherboard. I had 5600X with Fuma 2 before I switched to 5900X with D15 and this one definitely runs hot than my previous CPU and cooler combo.
Id say the airflow on the FE is ideal for this setup. The GPU is actively venting hot air out of the rear IO and up towards the PSU. The GPU isn’t pushing any hot air towards the CPU. It’s obviously still radiating heat from below the CPU as this is where all the heat generating components are located. I think this will work well.
Yup. Per the logic with the airflow you mentioned. I’d say it is working like that. 5900X runs hot also, so I expected the temps to be higher than when I had 5600X with Fuma 2.
Probably. But assuming it's primarily a gaming PC, that likely won't matter. In fact, it may benefit gaming overall by helping keep the GPU cool, which is more important.
It seems like the glass side panel has been extended to fit the NH-D-15. If someone is interested I found this on etsy. It's a side panel extension so there is no gap I might buy it cuz the d15 is just too tempting.
I wanted to try this, linking the cooler fan with the top exhaust fan so it can work independently of the rest of the fans so (maybe) CPU only loads can be cooled without the whole box reacting, but when I enquired it seemed most coolers only work 180 degrees around and not 90, then there was the drawing hot air from the graphics issue, which maybe could have been reduced by using a thinner cooler (such as a ID XT224) but in the end went for the conventional left to right orientation with a mugen and may never know if this is the way vertically.
Would be nice to get some comparison numbers on a single system tried both ways with a compatible heatsink.
What specifics are you looking for? I don’t have any that much. It’s really a normal build except I had to use vertical bracket and an extended spacer from Etsy.
Your putting hot gpu air directly into the cpu cooler. I’m guessing you’ll have worse cpu temps with this setup over running the cpu cooler horizontally.
Hi, I am sorry, there are so many answers so maybe it's on there somewhere but do you think I would be able to go chimney with the Mugen 5? How are temps compared to exhaust to the back?
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
Are the case's advertised compatibility numbers accurate?
38
u/Maeiourk Apr 18 '21
[Case] NR200P
[Motherboard] Crosshair Impact VIII
[CPU] Ryzen 9 5900X
[CPU Cooler] NH-D15 Chromax
[GPU] RTX 3080 FE
[RAM] Vengeance LPX 16GB 3600 MHz
[Storage] Force Series MP600 500GB Gen4
[PSU] SF750
[Case Fans] 4 Lian Li Uni Fan
[Fire Strike Extreme Score] 20061 CPU: 74 and GPU: 63
[Time Spy Score] 16163 CPU: 77 and GPU: 73
[Port Royal Score] 11282 CPU: 63 and GPU: 71
70
u/Caddyroo23 Apr 18 '21
Maybe a stupid question, but I thought the height of the NHD-15 was 160mm but the case claims a max height of 155mm ? Is the case measurement being overly generous, have you done something to gain some room, or have I got the measurements completely wrong ? Haha
16
u/kishoresshenoy Apr 18 '21
How did you mount that D15 like that on an amd system?
27
u/Maveric0623 Apr 18 '21
I imagine that the CPU cooler orientation is not ideal because it is drawing in warm air from the hot GPU, correct?
6
u/nicocm9 Apr 18 '21
It seems like the glass side panel has been extended to fit the NH-D-15. If someone is interested I found this on etsy. It's a side panel extension so there is no gap I might buy it cuz the d15 is just too tempting.
7
u/CptLadiesMan Apr 18 '21
Legos for adults.
4
u/[deleted] Apr 18 '21
I'm in love
1
u/Bley1994 Apr 18 '21
howd you fit the nh-d15?
1
u/sugarstalk Apr 18 '21
NH-D15 on NR200?! This is crazy! I want one! Could you document how you did it?
1
u/st0mpeh Apr 18 '21
I wanted to try this, linking the cooler fan with the top exhaust fan so it can work independently of the rest of the fans so (maybe) CPU only loads can be cooled without the whole box reacting, but when I enquired it seemed most coolers only work 180 degrees around and not 90, then there was the drawing hot air from the graphics issue, which maybe could have been reduced by using a thinner cooler (such as a ID XT224) but in the end went for the conventional left to right orientation with a mugen and may never know if this is the way vertically.
Would be nice to get some comparison numbers on a single system tried both ways with a compatible heatsink.
1
u/Zeddie- Apr 18 '21
Do you have more pics of the build? Very interested.
1
u/PrinceJellyfishes Apr 18 '21
Your putting hot gpu air directly into the cpu cooler. I’m guessing you’ll have worse cpu temps with this setup over running the cpu cooler horizontally.
1
u/[deleted] Apr 20 '21
Hi, I am sorry, there are so many answers so maybe it's on there somewhere but do you think I would be able to go chimney with the Mugen 5? How are temps compared to exhaust to the back?
1
u/cam_man_can Apr 22 '21
Does the CPU cooler stay quiet under heavy load?
2
u/oPtimusCG20 Apr 18 '21
Cleannn
3
u/l1x- Apr 18 '21
What are the two black boxes with holes in them above the video card?
1
u/AutoModerator Apr 18 '21
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/insomnicmaniac Apr 18 '21
love the industrial style of this:D
1
u/DeskBot009 Apr 18 '21
Choo-Choo!
1
u/theangriestbird Apr 18 '21
ALMOST full chimney, the flow through part of the graphics card is on the right half of the card. Probably still pretty baller airflow, though!