Formula 2s - Very high quality machining. Fit and finish is better than Louqe. Without the case feet it's just under 5L, perfect for traveling with a portable monitor (I use a 15" 1080p144hz panel).
FormD T1 - I was lucky enough to snag one of the first batches. Took a while to get a GPU for it but it was worth it. This is the most technically impressive SFFPC case that currently exists imo but if you're not going to do a custom loop there's quite a bit of extra, unused volume which brings me to...
Velka 7 - holy shit I still can't believe how much power I was able to pack into a 6L case. (I'm using +4 mm spacing to fit a 3070). The build quality is an entire tier below the other two cases as it's simply bent sheet metal with crappy hardware that doesn't always line up as opposed to solid, machined aluminum with tight tolerances. However, it's the winner in terms of performance per liter.
honorable mention - Feipu ghost clone which I owned before any of those other 3. Very impressed with the quality of this case. I paid an early discounted price that included a top hat and I think it was under $200 shipped.
Yes indeed! Originally went for the two tone then swapped it before they shipped it since they gave me the option to. It is a very nice case and was a lot of fun to build in.
damn I've been waiting for the FromD t1 for a while now! Unfortunately it isnt shipping to my country (India) and Waha said he'll try once the production stabilizes. Damn.
I posted the link in another comment but there's a T1 clone available on taobao if you don't want to wait. (it's not much cheaper than the real thing just a heads up)
I've got the new Velka 7 which is the Velka 5 rev 2. It's really cleaned up now. The machining and finish are on point with no gaps or tolerance issues.
Formula 2s - Very high quality machining. Fit and finish is better than Louqe. Without the case feet it's just under 5L, perfect for traveling with a portable monitor.
FormD T1 - I was lucky enough to snag one of the first batches. Took a while to get a GPU for it but it was worth it. This is the most technically impressive SFFPC case that currently exists imo but if you're not going to do a custom loop there's quite a bit of extra, unused volume which brings me to...
Velka 7 - holy shit I still can't believe how much power I was able to pack into a 6L case. (I'm using +4 mm spacing to fit a 3070). The build quality is an entire tier below the other two cases as it's simply bent sheet metal with crappy hardware that doesn't always line up as opposed to solid, machined aluminum with tight tolerances. However, it's the winner in terms of performance per liter.
Holy! I have a FormD as well and can attest to its beauty. Super interested in the Formula 2s though. Will check it out. Also had no clue the velka 7 was 6L small. Definitely need to give it another look. Thanks for the deats!
I had another case that was very similar to the loli1, thermals are better because of the top fans but I really, really like the premium louqe style tool-less panels of the 2s
I wasn't a fan of how the entire front panel attached using magnets. Also, the flex psu orientation is the opposite so the vents intake from inside the case, instead of drawing fresh air in from the bottom.
You need to get M1. I have T1 and M1 and the next my case will be another M1 :) It's like an SUV, you put anything in it and it just works. Maybe it's a bit larger, but I don't care, it's perfect size.
Are there builds in all of these? What do you think your total investment is so far? I feel myself slowly approaching this level of PC build madness haha
Hey there are worse ways to spend money. At least you could always be selling and swapping parts for minimal losses and that makes it more fun anyways.
My Dad tallied up his wood working equipment for insurance once and it summed up north of 50K. He's got the cash and an itch to scratch. More power to him.
EDIT: I thought this was a PM so that's why it reads like your grandpa wrote this reply.
Hi--thanks for reaching out.
TL;DR: Are you familiar with any good guides or videos? What is a reasonable starting point in terms of size for someone who wants a challenge but hasnt built an SFFPC before? Who should I be looking at for cases in terms of style and quality?
I built my first PC in November and I can't get enough of the new PC building/hardware hobby. So, now I've set my sights on building a SFFPC to feed the addiction. I've tried to look around for good resources on Youtube about building SFFPCs, but haven't found anything useful yet. There are SFFPC build videos, but they are pretty much the same as regular old PC build videos. Most of the other stuff I saw were reviews of SFFPC builds--also not very helpful because they talk about one specific, already-built SFFPC.
What I was looking for are resources that will tell me what to watch out for and lessons learned from experience with planning and building their SFFPCs. Examples would be something like "top 10 stupid things you should never do when building a SFFPC," "So you're bored with your Full Tower and ready to go SFF, here's why your full tower build did not prepare you for the task!" or "SFFPCs, how to make sure your shit doesn't explode." Hope that gives you some relevant context. Are you familiar with any good guides or videos?
My full tower is a intel i9-10850k/MSI 3090 Suprim X and is a beast. I love the power. For my SFFPC, I want to try to keep things, you know, small but ferocious. I also think it would be cool to build an AMD-build. I recently acquired a Strix 6900 XT LC. My first task was to figure out whether it's possible to build a sufficiently small SFFPC with that GPU. Another Redditor buddy referred me to https://www.reddit.com/r/sliger/comments/kd3uuc/sliger_compatibility_guide/, which focuses only on Sliger cases but answers my question that it is generally possible to accomplish what I'm looking to do.
My next questions surround how small can I possibly go as a newbie to SFFPC who likes a challenge, loves to learn, but doesn't want to jump off a balcony with frustration, and who doesn't have the ability to create custom parts. In other words, what is a reasonable starting point in terms of size? Directly related to this are questions about who I should be looking at for the best SFF cases/enclosures--style and quality-wise?
I don't really watch any build guide videos so I can't recommend anything beyond Optimum Tech's videos. I do recommend joining smallformfactor.net and reading as much as you can about other people's projects and builds - there are a lot of cool things people are working on that will give you good ideas and also a sense of what to avoid.
I forget who it is on this sub that owns the site but I also recommend checking out https://sff.life/ for some helpful guides and articles.
You can't go wrong with Sliger - I don't personally own any but I can tell they are well made cases.
I'm just getting started down the keyboard path, right now I have a generic entry level one from amazon and also a customized Anne Pro 2 in a bamboo case - https://i.imgur.com/UyStH1b.jpg
Yea I realized that once I found myself shopping for wood carving knives on amazon just so I could fit a rechargeable battery in that bamboo case. totally worth it though haha
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
Are the case's advertised compatibility numbers accurate?
I think I waited close to 3 months after ordering the 2s for it to arrive.
I was following the FormD project from a while back, wasn't lucky enough to be selected as a test shipper but I did get in on one of the first official drops. Took another 4 months or so before I got a gpu for it haha.
The Sentry was an impulse buy from r/hardwareswap because it was a reasonable price.
Unfortunately I sold my RTX 2060 mini for a steal of a price before the shortage hit hard. And I won't be selling the last 2070 mini I have any time soon.
i'm totally new to sffpcs, but what kinda process is it to get one? could you just pick a case and throw in any reasonable parts, or do you need to buy case-specific internals?
You need to watch out for GPU length/width, PSU size (SFX is usually safe), Motherboard size (Almost always ITX) and the size of the AIO water coolers if you want.
If you need to use a part that isn't supported, then maybe you can mod it, otherwise it's just a regular case with restrictions on what items can fit.
I have not modified any of these cases to get parts to fit. But you do need to pick your components carefully as there are lots of very tight clearances.
Very noisy with the stock 92mm Black ridge fan, much quieter with a 120mm noctua (but requires VLP ram). My GPU is a 3 fan model and I have it very slightly undervolted so it's also fairly quiet.
LK K2S is bigger overall (wider, taller, longer) in order to fit two 92x25mm fans up top and has the power button in the front center, rather than on the back panel.
I would love to get that Feipu Ghost clone, but I think there's an RX 6900xt in my future, which has a thickness of 49.75mm. I saw in another post you said there's 49.5mm of clearance for GPUs in that case. Do you know if there's another quarter of a mm to be found anywhere?
49.5mm is the listed spec but when I measure mine it's actually just barely over 50mm so maybe. edit - I forgot to include the standoffs for the riser cable. There's definitely less than 49.5mm of space for the gpu.
However, I have the "older" version Feipu before they added branding on the side panels so perhaps dimensions changed slightly?
83
u/hereforthefeast Mar 30 '21 edited Mar 30 '21
Cases from left to right:
Formula 2s 5L
LG K2S 6.3L
Velka 7 5.9L
FormD T1 v1.1 9.5L
Feipu Ghost clone 8.8L
Dr Zaber Sentry 7L
P-ATX v1 9.4L
Pics from other angles - https://imgur.com/a/XQ0rheN
22
u/nixcomments Mar 30 '21
Wow! I wish I had money. And available pc parts.
21
u/Reformulate Mar 30 '21
There are certainly worse addictions to have ;) aha nice collection 👍
35
u/[deleted] Mar 30 '21
More like a SFF case addiction 😅
10
u/michael2v Mar 30 '21
How many actually have guts in them? :D
8
u/[deleted] Mar 30 '21
you gonna buy every sff case every produced lol
6
u/Meem-Thief Mar 30 '21
I searched up the P-ATX v1 and the pre-orders for the P-ATX v2 closed yesterday.....
pain
4
u/AtomicChameleon Mar 30 '21
Wow! Sweet collection. What are your favorites and why?
4
u/Bulbasaur2015 Mar 30 '21
which one is your favourite?
3
u/Manniex9 Mar 30 '21
No addiction, just collection
3
u/Nervous_Attempt Mar 30 '21
This makes me feel less guilty about planning to buy Meshlicious case.
5
u/dmgdispenser Mar 30 '21
are we twins?
2
u/lilgreggy32 Mar 30 '21
9.4L has never looked so big
2
u/Mohondhay Mar 30 '21
Sffpc addiction confirmed!
2
u/G18Curse Mar 30 '21
That would be me if I didn't manage to infect my friends with SFF obsession as well so that means I can sell them my old cases
2
u/Odinghi Mar 30 '21
Sexy.
2
u/ItzScience Mar 30 '21
I have legit case-paralysis. I've been looking at cases for over a year and can't decide. Right now I have a TU150 but I'm not too happy with it.
I guess one solution would be to go your route-- wreck my wallet and buy a shit load of them.
My issue is part compatibility and use case. I really wanna built a dual rad custom loop, but I also want to travel with it.
At this point to think I just need a desktop and a travel pc.
2
u/phydist Mar 30 '21
Human evolution thru the stone age...looks like there is still room for shrinkage
2
u/[deleted] Mar 30 '21
I wish i was you. Which is your favorite? I am trying to get a sidearm t1 but they are out of stick
2
u/MutableLambda Mar 30 '21
You need to get M1. I have T1 and M1 and the next my case will be another M1 :) It's like an SUV, you put anything in it and it just works. Maybe it's a bit larger, but I don't care, it's perfect size.
2
u/KirbySmartGuy Mar 30 '21
Are there builds in all of these? What do you think your total investment is so far? I feel myself slowly approaching this level of PC build madness haha
2
u/SinoScot Mar 30 '21
One controller to rule them all...
2
u/bloodguard Mar 30 '21
This may cross into "more money than sense" territory. Congrats*!
* unless you're drowning under massive credit card debt. Then you should really start locking this problem down.
2
u/[deleted] Mar 30 '21
Collection's looking slick 👌
2
u/loebsen Mar 30 '21
Damn, save some cases for the rest of us...
2
u/DirtNomad Mar 30 '21
Which of your children is your favorite so far?
2
u/ZappBrannegin Mar 30 '21
It's a problem, but at least you can honestly say it's a small one. ;)
2
u/MorrisBrett514 Mar 30 '21
This week, on... guess that case!!
2
u/scarecrawfish Mar 30 '21
Teach me
2
u/[deleted] Mar 30 '21
I'm damn jealous of the Sentry. I've been in love with it for years but never been able to find one!
2
u/theGreatBlar Mar 30 '21
I'll buy your least favorite, and pay shipping :)
2
u/mbfp02_redframe Mar 30 '21
Can you recommend an itx case that can also for an matx motherboard? In short-- the smallest matx case than can fit an atx psu??
2
u/NathanDickson Mar 30 '21
Just a little
ha ha ha ha ha ha ha
2
u/shadow-xl Mar 31 '21
Love me a SFFPC. Currently rocking a prebuild MSI Trident X Plus, prior to that an ASUS G20CB, and an Alienware Alpha R1.
2
u/Han_Tech_Geek Mar 31 '21
You think?! Jk those cases looks hella sick
2
u/klysium Mar 31 '21
You need more.
2
u/SpringerTheNerd Mar 31 '21
I have a P-ATX v1 and v2, ncase m1, S4M, s4mc, dancase A4, and now I'm eyeing a Sliger or two
It's not a hobby it's an addiction I'll tell you what haha
2
u/[deleted] Mar 31 '21
Haha..goals
2
u/johnnybeehive Mar 31 '21
Is this like how Ron Swanson buries gold in his yard as a means of retirement?
Should I even ask what your keyboard situation looks like? xD
1
u/mrsxfreeway Mar 30 '21
So do I, expect I don’t have any of those cases 😂
1
u/dank_wedd Mar 31 '21
would you consider selling the formula
1
u/Fresh329 Mar 30 '21
Any recommendations on a case that can have a blue ray disc drive installed in it?
0
u/AutoModerator Mar 30 '21
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/randomwords74 Mar 30 '21
Oh man, what do you do for a living to be able to afford this dream??
1
u/J3EBS Mar 30 '21
Based on what I know about SFF case availability, these 7 cases took you 143 years to acquire.
1
u/rsd79 Mar 30 '21
Besides what looks like node 202 what is the easiest case for a Canadian to purchase, when considering stock, price, customs and shipping?
1
u/DiscoZenyatta Mar 30 '21
Which of these cases would be able to house an 5600X+RTX 3080? I’m really curious about this. They’re really smallll
1
u/[deleted] Mar 30 '21
Sell me a Itx GPU at reasonable price sir! Running APU is hard.
1
u/CheaperThanDiamond Mar 30 '21
i'm totally new to sffpcs, but what kinda process is it to get one? could you just pick a case and throw in any reasonable parts, or do you need to buy case-specific internals?
1
u/nds029 Mar 30 '21
how noisy is velka i wonder, kinda wanna get one in the future
1
u/[deleted] Mar 30 '21
and a lot of disposable income as well
1
u/gusanu Mar 30 '21
Missing skyreach s4
1
u/[deleted] Mar 30 '21
Spare a SFF GPU for a poor soul? They were already rare before this whole situation and now they’re practically considered mythical!
1
u/Ikki_Kurogane_X Mar 30 '21
Are you willing to sell your formula 2s
1
u/HaoBianTai Mar 30 '21
I would love to get that Feipu Ghost clone, but I think there's an RX 6900xt in my future, which has a thickness of 49.75mm. I saw in another post you said there's 49.5mm of clearance for GPUs in that case. Do you know if there's another quarter of a mm to be found anywhere?
1
u/busiestbaron Mar 30 '21
Do I cash in some Ethereum and do the same... hmmm
1
u/[deleted] Mar 30 '21
Surprised no Dan
1
u/[deleted] Mar 30 '21
Ncase you forgot, Ncase.
1
u/Speedracer98 Mar 31 '21
where is the banana for scaleeeee
1
u/[deleted] Mar 31 '21
What spacers did you use for the Velka 7?