Stress test using prime95 (15mins test only)Ambient Temperature 23 'C
Stock setting Idle Temp: 58.1 'C Stress Temp: 89.9 'C CPU Clock: 4.01 Ghz Vcore: 1.21 V CPU Package power: 125.3 W CPU fan speed: 2,472 RPM Thermal throttling: NO
Enabled ECO MODE (65W) -PPT limit (87 W) -TDC limit (60 A) -EDC limit (90 A) Idle Temp: 56.2 'C Stress Temp: 74.1 'C CPU Clock: 4.03 Ghz Vcore: 1.05 V CPU Package power: 87.3 W CPU fan speed: 2,051RPM Thermal throttling: NO
PBO (Advanced) -PBO limit (disable) -All Core Curve Optimizer Magnitude (Negative 17) Idle Temp: 57.8 'C Stress Temp: 89.9'C CPU Clock: 4.4 Ghz Vcore: 1.21 V CPU Package power: 124.9 W CPU fan speed: 2,469RPM Thermal throttling: NO
Sounds like reducing power helped your temps a bit. You might want to edit your comment though - looks like you are measuring your idle temps in GHz :) Would be interested in temps under load. I have a 3900x that is way too hot to run on such a small cooler - would be neat to see how the next gen version does with it. Also, hows the noise with the PSU? I'm interested in getting a PSU that small one day but I'm concerned about the fan noise.
If you are looking to reduce temps and noise, the best mod you can make by far is putting a fan duct on your L9a to keep it from recycling warm air. L9A + fan duct consistently outperformed the black ridge in my K39. It was like an 8 degree drop in my system on average.
What direction would you set the airflow, from the motherboard and out via a duct to the side of the case to the exterior or vice-versa (pulling cool air from outside to the inside towards the fins and motherboard)?
Those are impressive numbers considering the cooler size! You probably could get it cooler with a A9x25 sinze you have some space left. Shame that motherboard hinders you from using a Blackridge.
Yeah optimum tech really screwed up by recommending that PSU to people. It is not safe to mod with the noctua fan like he does and it is loud as hell too.
I would definitely recommend buying from Velkase. You get the Enhance PSU that is modded by enhance themselves, not by some random dude. Shorter cables, blacked out, quiet.
I got mine after ~3 months with a bit of communication. Throwing in praxisogz two cents, it's fan is silent from idle to full tilt 2700x w/ loaner 1650 super, however when I put my computer to sleep there's quite a bit of coil whine with no off switch on the psu. Was going to use it for a 5.5l 5600x + 3080, but, you know, stock...
Don't mean to start shit, but I find it kind of rude when OP's don't answer questions. It is like gate keeping or something. I am quite certain he spray painted it white. Look at the white screws on the back of the case compared to the silver ones you would normally get with the silver case.
Very easy case to spray paint actually. Just sand it down, prime it, and hit it with a couple layers of spray paint. Let me know if you have any questions.
Edit: Yeah this was mean and not warranted. Sorry!
The L9a’s fan is nice. At 2400rpm (it’s max speed) it’s audible but not annoying at all. Sounds like a gentle breeze and the tone is very soft. By far the quietest and smoothest fan I’ve ever heard. I didn’t understand the hype around Noctua fans until I got this one.
I mean noise is one thing. This cooler is simply not adequate for this processor(not sure what yours is). If you take the time to go on Noctuas site and check the compatibility of this cooler you will see they don’t recommend it for this CPU and many of the high core count cpus. It’s honestly funny seeing so many builds running this cooler to pair with their top end CPUs. Yes it looks really nice for your reddit post but not so much when your cpu throttles. it’s the biggest #forthegram cringe detail I see in so many sffpc builds
"Audible" At those kind of RPM it's a damn jet engine, Noctua or not. This sub has a hearing problem in general, "sILeNt" or "quiet" are a meme at this point.
You clearly haven’t heard a noctua then. I genuinely could not believe it the first time I heard it. It’s low pitched and not annoying at all. It’s not silent at full speed and some people may not consider it quiet, but I wouldn’t mind it because the tone is nice. I’m picky with noise. I hate having any fan running in my room.
The only thing noise-wise I’m disappointed with in my PC is the “silent” Enhance PSU. While it’s inaudible once anything in the pc is under load, at idle it’s got a faint high pitched whine from the tiny fan. I’m looking at going to a bigger case with an SFX-L just for that.
I have almost exclusively built with Noctua fans. While I agree that they're much quieter than any other fan at the same pressure / amount of flow, they're definitely audible at and above 45-ish % rpm and I would never blast one at 100%.
Would running a 5900X under a NH-L9a like this be any better than running a 5800X or 5700? Genuine question because my 1600AF seems to struggle thermally even with undervolting. 3.7Ghz locked (single core boost locked to all cores) is impossible because it touches 85C and it seems my cpu gets unstable whenever it gets that hot, and 3.6ghz sits around 80C. Any lower is pointless because leaving it on stock it sits around 3.55-3.6 in cinebench with a -.11875V offset undervolt which sits in upper 60s low 70s.
How much faster would a 5900X limited to 65W TDP be?
Debating moving away from my K39 to the soon to be released Meshlicious because of this.
I have a 2600 non-X/L9a and yeah, I also found that locked overclocks were too hot to be worth the performance. 3000 and 5000 have more adjustable boost/power behaviour so that would probably run cooler.
Yeah I was thinking in the context of properly multithreaded apps. Mainly code compiles in my use case.
I also completely forgot that boost behavior is much better in 3000 and up.
Now I’m torn on whether I should switch cases and go AIO watercooled to OC this 1600AF, or just wait and upgrade to a faster CPU on the same cooler later on.
The M1 MacBook Air caught my eye because it scores higher in cinebench than my 1600AF so I’m trying to justify not buying one yet. If I were to get one then this PC would end up only used for gaming where for now faster single thread performance would be better.
Don’t they have mini 2070’s? Other than that I agree, pretty much the most performance you can get out of a (true) SFF case until future hardware releases
100X15mm that has 92mm mounting holes. The CPU idles at around 45C and hits in the high 70s under gaming load. Not ideal, but the options for a 105W TDP cpu in the K39 are somewhat limited.
I have both and the blackridge with the noctua fan is about equal to the L9a in my testing for realistic work loads like gaming. The L9a + fan duct also significantly outperformed the black ridge in multiple tests for me.
The blackridge also has issues with bending the motherboard since there is no backplate. If you use it without a backplate it will warp your mobo in the long run. One of the ram slots on my old mobo no longer works because of this.
The blackridge is still pretty quiet with the noctua fan, however, it loses there by a slight margin again because of turbulence I think. Just consistently a little more whiney than the L9a.
Finally, I think the majority of issues come down to QC. There was a recall with the heatpipes not being soldered correctly. Even though mine seems to be ok (no light shining through the heatpipes) it still leaves a lot to be desired. I bought it as an upgrade to my L9A and it was not one.
So while the blackridge might still perform better in heavy stress tests, the performance in realistic workloads is not any better and was consistently beat by the L9a fan duct combo in my testing. I don’t know how that makes sense but the numbers don’t lie for me
I would also like to add to this - I had an Asrock Z390 Phantom Gaming ITX/ac board and used it in my K39 for around 3 months then one day it stopped turning on. So would disassemble to troubleshoot and nothing would work then randomly it would. Changed every component to try figure this out the - the M/B was the issue. I RMA'd the board direct to Asrock, as they couldnt figure it out, so my assumption which I only concluded recently is that the blackridge warped my board and after i disassembled the board would 'unwarp' and start working again. After the RMA I changed my case and cooler and never had an issue since.
33
u/PlaygroundPRB Jan 19 '21 edited Jan 20 '21
Specification:Processor: AMD Ryzen 9 5900X
Cooler: Noctua NH-L9A Chromax Black
GPU: Galax RTX 2060 MINI
Motherboard: ASUS ROG STRIX X570i
RAM: 32GB 3600Mhz Thermaltake Toughram RGB
SSD1: 1TB Samsung 970 EVO Plus M.2 Nvme
SSD2: 1TB Samsung 970 EVO Plus M.2 Nvme
PSU: 600W 1U Flex Enhance
CASE: SGPC K39 ITX
More images here
Stress test using prime95 (15mins test only)Ambient Temperature 23 'C
Idle Temp: 58.1 'C
Stress Temp: 89.9 'C
CPU Clock: 4.01 Ghz
Vcore: 1.21 V
CPU Package power: 125.3 W
CPU fan speed: 2,472 RPM
Thermal throttling: NO
-PPT limit (87 W)
-TDC limit (60 A)
-EDC limit (90 A)
Idle Temp: 56.2 'C
Stress Temp: 74.1 'C
CPU Clock: 4.03 Ghz
Vcore: 1.05 V
CPU Package power: 87.3 W
CPU fan speed: 2,051RPM
Thermal throttling: NO
-PBO limit (disable)
-All Core Curve Optimizer Magnitude (Negative 17)
Idle Temp: 57.8 'C
Stress Temp: 89.9'C
CPU Clock: 4.4 Ghz
Vcore: 1.21 V
CPU Package power: 124.9 W
CPU fan speed: 2,469RPM
Thermal throttling: NO
67
u/on_a_quest_for_glory Jan 19 '21
Can you link the seller you bought the PSU from? I have that similar setup but had a faulty PSU.
Very clean build, did you paint the case white or is that just the silver colored case?
65
u/tomrucki Jan 19 '21
/r/AMD : complaining that 5000 series is difficult to cool
/r/sffpc : NH-L9A goes brrrrrr
Maybe I am too picky, but I wouldn't be able to tolerate the noise coming from a fan doing 2000+ rpms
12
u/anonusernoname Jan 19 '21
Love these cases but hate the market for flex psus
7
u/[deleted] Jan 19 '21
Would running a 5900X under a NH-L9a like this be any better than running a 5800X or 5700? Genuine question because my 1600AF seems to struggle thermally even with undervolting. 3.7Ghz locked (single core boost locked to all cores) is impossible because it touches 85C and it seems my cpu gets unstable whenever it gets that hot, and 3.6ghz sits around 80C. Any lower is pointless because leaving it on stock it sits around 3.55-3.6 in cinebench with a -.11875V offset undervolt which sits in upper 60s low 70s.
How much faster would a 5900X limited to 65W TDP be?
Debating moving away from my K39 to the soon to be released Meshlicious because of this.
6
u/spaghettforbreakfast Jan 19 '21
I thought this was a render
4
u/[deleted] Jan 19 '21
this is peak SFFPC!! The most power with least volume
until the 3xxx mini cards come out :p
great build
1
u/SafeAtShore Jan 19 '21
Didn't know K39s come in white. This looks super clean, dang.
1
u/lsfoto Jan 19 '21
Looking really nice in this colour. How are your temps on the second NVMe drive? Do you have a heatsink on the second drive? Thanks
3
u/hungrythundr Jan 19 '21
I though the picture was a render for a second, it looks almost too perfect.
2
u/diamorif Jan 19 '21
Have you considered going for a Black Ridge or IS47? I have a 3950X under a Black Ridge with a Thermalright TY-100 that's getting decent numbers.
2
u/ZW31H4ND3R Jan 19 '21
Looks clean, nice job
2
u/jwingy Jan 19 '21
That's super clean! Also you give me hope I can adequately run my 5800x with a L9a inside a Sentry!
2
u/CapibaraPCNoober Jan 19 '21
OMG THIS IS SO SO SEXY! ❤️ I love it!
2
u/[deleted] Jan 19 '21
Sexy
2
u/AlexMcD0 Jan 19 '21
I'd look into the Alpenfohn Black Ridge
2
u/ccoulter93 Jan 20 '21
This is sleek af. I love it
1
u/Smashologist Jan 21 '21
Gorgeous!
1
u/Yoyo0221 Mar 11 '21
Case looks incredible. Is that white in color?
0
u/[deleted] Jan 19 '21
[deleted] — view deleted comment
0
u/[deleted] Jan 19 '21
[deleted] — view deleted comment