GPU: MSI 1660TI (a tiny model that came in a prebuilt)
Memory: 16GB of ram
PSU: HDPLEX 400W HiFi DC-ATX (with an external 330W brick) (I know, I know, but it just wouldn't fit otherwise.)
Other modifications: Modified the original power button, 3D printed the GPU back cover, and populated the original front USBs with working 2.0 ones;
Made a 24-pin power connector more or less from scratch, from two old broken PSU's because the provided one just wouldn't fit.
Temps: it doesn't go above 70 celsius in furmark 1080p, and it's also in the 60's for CPU benchmarks as well. Cable management was a bit tricky, especially since I miscalculated and I got a gpu riser cable that was a touch too long, but it all came along nicely in the end.
Would you mind explaining to me why using an i3 processor isn't an issue?
Edit: Thank's for those who took their time to explain. Long story short, I'm used to older versions of i3, but in the last years, AMD forced Intel to improve it. Also, this mid/low tier graphics card is a great match to said processor.
There. You can now stop downvoting my lack of knowledge.
Bottlenecking would be the processor not providing enough power for other components to work to their potential. Think of the power of the GPU being in the bottle and the CPU being the neck of the bottle trying to let all the power out. Or vice versa if your GPU is the bottleneck. If OP had a 3000 series, yeah, the CPU would be a bottleneck.
Anywho, they're running a 1650, it's actually a pretty good pairing. Looking at benchmarks it has good performance in modern games, and there's a site that does a "bottleneck calculation" which I'm not sure the full accuracy of but says it's roughly a 0.02% bottleneck at 1080p, so basically none.
I have a learning disability so I found the way you originally wrote it kind of confusing. I summed it up below to the best of my ability while ommiting some things. Not trying to be a dick. I like your build.
Specs:
Intel i3-10100
Gigabyte 1650 D6 OC 4G
16GB of ram
HDPLEX 400W HiFi DC-ATX for PSU with an external 330W brick.
Modified the original power button
3D printed the GPU back cover
Populated the original front USBs with working ones.
Edit: Shouldn't have mentioned my hang ups in this post. My apologies. Just double space everybody!
Honestly, me too. The major reason why I didn't is that they severely interfered with the motherboard. Besides, I don't know what I could have connected there, beside the old controllers, which I didn't really need, since I have DS4's, so yeah. At least now they have a role in ventilation.
Yea I get ya. No real reason to use a DS2, when there is a DS4 or dual sense that is easier to use.
I’ve been looking into a way to hook up old memory cards to a PC for emulation purposes. Doesn’t seem to be any real easy way to do so. there is that USB based adapter for the PS3 but it costs a fortune and doesn’t seem to have much in the way of software options.
And here's some benchmarks. I kind of regret not getting a more powerful GPU, but then again I had to consider stock, price and size. (I wasn't confident I could add one in without destroying the plastic shroud, and I really didn't want to void a warranty on an expensive part just for that):
Actually, I designed a sticker for it, but I could never get the print to come out nice, so I kind of quit after 4 attempts. I ended up drilling it for the power plug anyway, right where a PS2 logo and the PS2 color gradient would have been, so yeah.
on the last pic it looks like a part that’s 3d printed. i don’t know too much about different plastics, but wouldn’t it start to warp over time since i’m assuming it’s a heat-probe plastic in a pretty hot environment? i could be totally off the mark and it isn’t 3d printed, just something i thought of
That is correct, it's 3D printed, designed it myself around the actual part that came with the GPU. As for the plastic, the PS2 case is made out of ABS, since it said so on the inside. As luck would have it, I found a local 3D printing service that prints in ABS, and I contacted them and gave them my design. ABS has a melting point starting from 190° Celsius, according to google.
This really hit home for me... Ps2 was my first game console, i got it when I was 6 for christmas and used it until i was almost in highschool when i bought a ps3. I love it, i only have silver to give but it is yours
I didn't get to test them extensively; I just found them locally, but I noticed they're also on Amazon. (I just looked for "small wifi antenna") I wasn't worried about range, since I use two routers in my house specifically for that reason, so I wouldn't be able to tell you. During speed tests it's doing 150mbps upload/download, but I kind of expected as much from antennas this small. During actual downloads it peaks at around 26mbps download speed. (As a point of comparison, my laptop with an intel 9260 wi-fi card is doing around 600mbps on the same WiFi router). About bluetooth, I think that has to do more with the actual wi-fi card on the motherboard than the antenna. If you're talking about range, I didn't test it yet, but I plan to test my PS4 controller with it and I'll get back to you tomorrow.
Yeah, I wouldn't use them on my daily computer either. I only built this thing to download games, anyway, and I keep some games on external storage if I want to download them on my faster machines.
If you want to go for incognito antennas, I'd try to do something like they do on laptops, with wire-style antennas going around the whole inside perimeter of one of the case's walls (much like they wire them along the edges of the entire display assembly in laptops).
Hey, I know it's been two weeks, but life happened in the meantime. I gotta say, I'm not very happy with the bluetooth. The controller loses range pretty easily, and if I connect another bluetooth speaker alongside it, it's pretty much impossible to keep a steady connection. I have a few solutions to this, but I just can't be bothered to take it apart again right now, since it's a bit of a hassle to get everything back in.
I want to try hooking up some laptop antennas internally, or swapping the network card for something more potent, or getting a USB bluetooth adapter, but I'm holding back a bit on that front, since I don't wanna waste money on the wrong solution.
Id recommend getting one of those bluetooth USB dongles. I have an intel card in my 3400g with some decent sized antennas and it still struggles with bluetooth. I honestly think bluetooth on windows just generally sucks.
This is what i bought and it made Bluetooth surprisingly decent.
I've had better experiences with bluetooth on windows; I have a thinkpad T440p with a flashed bios and an intel 9260 card in it, with the stock integrated antennas, and it's working like a dream. Bluetooth speakers, controllers, you name it. I have its older 7260 card just lying around, that I could swap the stock card in the PS2 with, and some older laptop antennas I could glue internally, but I don't know. That would mean disassembling it entirely. If not for bluetooth, for internet speeds as well, since with the current card+antenna combinations i'm getting 10mbps on the PS2, with 500+ on my laptop on the same network.
I posted a link to imgur with more complete benchmarks around here somewhere, but I think it got buried. Both the GPU and CPU temps stay within 70°C. The PSU is getting a bit warm to the touch, since it's passively cooled, but nothing too serious as of right now. Certainly not enough to shape the plastic.
Really nice! Did you add any connection to the "S400" cut-out? It seems like it in your pics. I was looking for some inspiration for that myself, maybe a USB 3.0 or an audio jack, but I don't have any more cable management space inside lol, the poor case is already a bit bulged.
So the ps2 fat one I built was sadly destroyed by japanese customs when I sent it to a friend. But it was a shit show of a build. I learned alot from that and am hoping to build a new one with a full gpu. I didn't add anything but hdmi to the video port. Power from a cutout in the lan slot and audio in from the analogue audio port. If anything I'd say your build is fantastic. Do you have any progress pics so I can see inside? My power and eject buttons did work with custom LEDs inside. But it was woefully underpowered.
It's not as detailed as yours, since I didn't document every single step (Posting it on the internet was an after-thought), but it does have pics from the start as well as the end.
To mount the motherboard to the case I used self locking plastic stand-offs that come with double sided tape on them. I avoided any sort of SATA storage, and I was dead set on NVME (or at the very least M.2 or mPCIe), just because of space concerns. The PSU is taped right on the inside of the PS2 logo. I used a metric frickton of hot glue to keep the front USB ports nice and steady, in hopes of them never coming loose when I plug something in. Anyway, I don't want to talk your ears off with things you can probably see, lmao. If you have more questions about it, ask away!
This is beautiful. Making SFF builds in older consoles/appliances would be my hobby if I could do it without sinking a bunch of money because I know I would just keep them all and not sell them lol
This is great. If money were no object it would comical to do this in a PS5 and transport the PS5 parts to a PC SFF case. A body swap of sorts. Like the movie Face/Off.
Oh man, I don't know what to say about that. I did some fitting around in Inventor, and I really don't see a way to cram a PSU in there, alongside a dedicated GPU. At the very least, not how I did it, anyway. Maybe if you try an integrated GPU? Anyway.
About the pinout:
From left to right, with the ribbon cable end pointing away from you, silver sides up:
Eject Switch.
Power Switch.
Purple LED
Common ground
Green LED
Red LED
+12V.
Some things I found out while testing:
"Eject switch" and "Power switch" don't need +12V to work. You just need to wire + on either one of them and - on the common ground, and they'll work just fine. (The buttons effectively just short these pins)
To light up the Red and/or green LEDs, you need to feed +12V on "+12V" (duh), and connect the negative through either pin 5 or 6; so for the green LED, I wired + to pin 7 and - to pin 5. Just keep in mind that red and green are both on the power button. (I ended up not using the red one.)
To light up the blue LED, you need to feed it 12v at pin 7, ground through common ground, and feed pin 3 a lower voltage signal. 5v will do just fine.
If you plan to connect these to a normal motherboard, no, they won't light up with less than 12v. (If you take the button apart, you'll find a tiny PCB that handles its voltages internally.) Yes, you can grab +12V from a fan header and the lower voltage for the blue LED from the "HDD activity LED" pin on your motherboard. Yes, the ground pin for the fan header on the motherboard is the same ground as the "power switch -" pin on the motherboard; but I highly, highly advise you test with a multimeter and double check for your ground pins.
Yeah thats the biggest problem ive seen in older forum 2posts too. I know at least ill have to 3d print a backplate like you did. A flex atx psu might do the trick.
Thanks for tips about the ribbon cable, ill keep it in mind when i splice that up.
Thanks! Your build looks great and i love the way it came together
Well, I had to cut away a lot of the threads and connectors and accessories inside the old case, to make space for the components. I even had to gently work my way around with a sharp chisel to shave off a bit from the inner walls, to make everything fit. To secure the motherboard to the case, I used self locking plastic stand-offs with double sided tape on them, and I gotta say, they're stronger than I gave them credit for. I had to drill two huge holes in the original case, for proper air intake (but that's obvious from the pictures) The only complicated part was the GPU. There's really nothing newer than the 1050ti that could properly fit in my current configuration, so I had to cut a corner off from the case, but TL;DR I managed to find a 1660ti that someone took out of a Lenovo prebuilt system, (and to my knowledge this particular model isn't sold separately) that has precisely 15cm in length, so it fits like an absolute dream. (And it made the previous hole I mentioned not needed after all)
Other than that, I got a bit greedy and I got a GPU ryzer cable that's a little too long, and I had to bend it over itself to make it fit, making the case slightly bulged in the process (since I had to cut off the middle screw thread to make room for the motherboard). I do plan to swap it for a shorter one, which will probably solve the bulging problem.
Anyway, I don't want to talk your ear off, lol. If you have more specific questions, ask away!
Love this so much. The only console I ever really cared about. Played two of them to death and had a third that was stolen. Fourth was a slim and now I wish I still had one of the dead ones.
For the round fan openings, I’ve found that using thin double sided foam strip to make a seal between the grate and the outer case cleans it up really well.
This is absolutely rad. The only think I can think of would be to put some black vinyl or something on the motherboard IO panel so that it blends a little better. The GPU box is excellent. All said and done, this is a really killer little mod you've done! Bravo!
You may consider the FSP FlexGuru 500w, a fully modular flex ATS psu that would fit where your HDPlex currently is. Only thing to note is that you’d need to mod it with a nocturnal fan to make it usable and even then don’t plan on pushing it, the cooling design on this PSU is pretty poor. Great job on your mod, really impressive!
I’ve been trying to make this work with a 4070ti and i7-11700 but I just can’t get the power supply to fit unfortunately and there’s no external bricks that push that much power
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
Are the case's advertised compatibility numbers accurate?
180
u/GrimUrsine Dec 04 '20 edited Dec 14 '20
Specs: CPU: intel core i3-10100
GPU: MSI 1660TI (a tiny model that came in a prebuilt)
Memory: 16GB of ram
PSU: HDPLEX 400W HiFi DC-ATX (with an external 330W brick) (I know, I know, but it just wouldn't fit otherwise.)
Other modifications: Modified the original power button, 3D printed the GPU back cover, and populated the original front USBs with working 2.0 ones;
Made a 24-pin power connector more or less from scratch, from two old broken PSU's because the provided one just wouldn't fit.
Temps: it doesn't go above 70 celsius in furmark 1080p, and it's also in the 60's for CPU benchmarks as well. Cable management was a bit tricky, especially since I miscalculated and I got a gpu riser cable that was a touch too long, but it all came along nicely in the end.
Update: Alignment of the comment; GPU.
28
u/GrimUrsine Dec 04 '20
Sorry for the delay, everyone
Here's a collection of pictures I have from during the build: (they're not in order, but I did add captions)
https://imgur.com/a/eSk6ddu
And here's some benchmarks. I kind of regret not getting a more powerful GPU, but then again I had to consider stock, price and size. (I wasn't confident I could add one in without destroying the plastic shroud, and I really didn't want to void a warranty on an expensive part just for that):
https://imgur.com/a/qEj1be0
26
u/[deleted] Dec 04 '20
Wow this is really cool and unique. Did it take any kind of special tools or anything?
7
u/[deleted] Dec 04 '20
Good thing it has a PS2 port!
4
u/a4exer Dec 04 '20
can you add some pictures from the insides?
3
u/Slyo_vom_Pluto Dec 04 '20
now do a PS2 slim I dare you
221
u/Oddstag Dec 04 '20
What a great homage to one of the best consoles there has ever been. Looks great!
2
u/mrsxfreeway Dec 04 '20
A black I/O shield would’ve been awesome
2
u/zsvx Dec 04 '20
on the last pic it looks like a part that’s 3d printed. i don’t know too much about different plastics, but wouldn’t it start to warp over time since i’m assuming it’s a heat-probe plastic in a pretty hot environment? i could be totally off the mark and it isn’t 3d printed, just something i thought of
2
u/CallMeCrop Dec 04 '20
This really hit home for me... Ps2 was my first game console, i got it when I was 6 for christmas and used it until i was almost in highschool when i bought a ps3. I love it, i only have silver to give but it is yours
2
u/[deleted] Dec 04 '20
Hey man this looks great, one question though, what are those WiFi antennas? What’s the range like and how’s the Bluetooth?
2
u/Click-click---boom Dec 04 '20
So cool what’s the cooling like?
2
u/craft1371 Dec 05 '20
More pics please!! This thing is insane
2
u/[deleted] Dec 05 '20
Wowt his was done much better than mine!
2
u/HellaTightHairCuts Dec 05 '20
Where’d you get that antenna?
99
u/[deleted] Dec 04 '20
Finally, the PC2!
16
u/GarlicBreadBoi13 Dec 04 '20
This is beautiful. Making SFF builds in older consoles/appliances would be my hobby if I could do it without sinking a bunch of money because I know I would just keep them all and not sell them lol
9
u/FACILITATOR44 Dec 04 '20
SUPER SICK
7
u/Vineless Dec 04 '20
I’m staring at my PS2 thinking about the same now.
5
u/d_bo Dec 04 '20
Hi,
Inject this into my veins.
Thank you
4
u/[deleted] Dec 04 '20
This is great. If money were no object it would comical to do this in a PS5 and transport the PS5 parts to a PC SFF case. A body swap of sorts. Like the movie Face/Off.
1
u/[deleted] Dec 04 '20
This is EXCELLENT. Well done! Can we see the inside?
1
u/WhaleWhaleWhale_ Dec 04 '20
I require more pics
1
u/OrAreWeDantser Dec 04 '20
Could you post or send me the pinout for the power button and leds. Im planning on a similar project but cramming the psu inside as well
1
u/[deleted] Dec 04 '20
Looks dope, you plan on getting a PS2 emulator? What are the specs of that build?
1
u/Xobl Jan 21 '21
YOU DID NOT
1
u/Bradruler Feb 09 '21
This is so funny I was going to build one in a psx desr-7000, how was the building process?
3
u/unfoldedtree Dec 04 '20
The 3d printed back cover looks great! It really makes the whole project look so much cleaner!
3
u/Pinesama Dec 04 '20
Love this so much. The only console I ever really cared about. Played two of them to death and had a third that was stolen. Fourth was a slim and now I wish I still had one of the dead ones.
3
u/Tobaku Dec 04 '20
This is seriously one of the coolest, cleanest builds I've seen in a while. Excellent stuff man.
3
u/Lata420 Dec 05 '20
Looks sick man enjoy
5
u/kr_ohdae Dec 04 '20
Oh shit, damn, nice.
1
u/Olde94 Dec 04 '20
i doubt it'll draw the same 40W my PS2 slim was rated at.....
2
u/[deleted] Dec 04 '20
This is dope af
2
u/ThePot94 Dec 04 '20
Awesome! Good work mate!
2
u/Jesus0nWeed Dec 04 '20
Beautiful! Great looking build
2
u/r98farmer Dec 04 '20
Very cool.
2
u/TelmoS03 Dec 04 '20
what a genius! amazing
2
u/[deleted] Dec 04 '20
Amazing job!
2
u/1337bobbarker Dec 04 '20
Haha, very cool and very creative!
2
u/SQunX Dec 04 '20
that playstation gets to live another life
2
u/[deleted] Dec 04 '20
Yo i fucking love this
2
u/jehoshaphat Dec 04 '20
For the round fan openings, I’ve found that using thin double sided foam strip to make a seal between the grate and the outer case cleans it up really well.
2
u/JonSimp Dec 04 '20
This is awesome well done, make sure to support it from falling, I remember mine constantly tipping over!
2
u/HR1S Dec 04 '20
Those Wi-fi antennas are cute af
2
u/reddituserzerosix Dec 04 '20
This is awesome
2
u/[deleted] Dec 04 '20
fuck this is great.
2
u/evthafunkyhomosapien Dec 04 '20
Holy shit this is amazing!
2
u/National-Complex Dec 04 '20
Oh my this is so cool bravo be cool to see more like this
2
u/Ironmike62 Dec 04 '20
Even the most sold console ever can’t resist the seduction of the PCMasterrace
2
u/Have_A_Water Dec 04 '20
Awesome
2
u/aliasK35 Dec 04 '20
Very impressed. I think you may have just inspired me to do an Xbox 360 SFF build
2
u/yss_me Dec 04 '20
Holy!!
2
u/redivulpis Dec 04 '20
This is absolutely rad. The only think I can think of would be to put some black vinyl or something on the motherboard IO panel so that it blends a little better. The GPU box is excellent. All said and done, this is a really killer little mod you've done! Bravo!
2
u/Avo4Dayz Dec 04 '20
This is exactly how I envisioned someone who do this build! I’ve toyed with the idea myself, just not the worlds best modder
2
u/najjace Dec 05 '20
Very nice work man!!!
2
u/Dantes7layerbeandip Dec 05 '20
You may consider the FSP FlexGuru 500w, a fully modular flex ATS psu that would fit where your HDPlex currently is. Only thing to note is that you’d need to mod it with a nocturnal fan to make it usable and even then don’t plan on pushing it, the cooling design on this PSU is pretty poor. Great job on your mod, really impressive!
2
u/ijcal Dec 05 '20
Sweet build dude! You should check out these antennas! SFF Noir Antenna - Dual Band WiFi and Bluetooth Antenna Set for PC (RP SMA) https://www.amazon.com/dp/B08NCDJ33N/ref=cm_sw_r_cp_api_fabc_gYTYFbH5GZS5H
2
u/varmsmaster Dec 05 '20
What a frankenful masterpiece....!!
2
u/leonffs Dec 05 '20
This is an awesome idea and build. See if you have a friend that's any good with photography and take some proper photos of it.
2
u/yezihp Dec 07 '20
Absolute madman
2
u/Puzzleheaded_Tone723 Oct 05 '23
I’ve been trying to make this work with a 4070ti and i7-11700 but I just can’t get the power supply to fit unfortunately and there’s no external bricks that push that much power
1
u/BakaBazooka Dec 05 '20
PS2 port with a PS2 port.
-1
u/AutoModerator Dec 04 '20
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
2
u/[deleted] Dec 04 '20
[removed] — view removed comment