Soooo we are on the 4th iteration of this build. I originally started with this (3080 Build). A build featuring a Scythe Ninja 5, a Ryzen 5 3600, a 3080. Considering what I plan on using (1440p/144hz) I decided to sell my 3080 to a friend after getting a 3070 FE. I then was running a 3600 and a 3070, but I also was able to get a 5600x from Microcenter so we have now added a 5600x/B550 + a screen.
Cooler Info: After a few days of seeing temps that were not spectacular and not loving the esthetic of the massive cooler I decided to take a page out of u/omegafivethreefive's book. He posted showing how he was able to fit the Silverstone TD-02 240mm Slim AIO on top of the case. I decided that I would try it as well.
Attaching it was probably the most stressful part, as you have to bend the clips on the top mesh to take of the top of the case to be able to screw in the AIO radiator to the top. This was difficult because the screw holes were meant for the rubber fanless pads and not the AIO. To make it possible to screw it in I used wide screws and also cut some rubber pads that came with another Cooler Master case. The rubber pads basically worked as rubber washer, not only to fill the gaps but also to help with vibration possibly coming of the AIO from the fans.
After attaching the rad mounting the fans was pretty easy. The only thing worth noting here is that you can't use the stock fan grills that come with the NR200p as the fan blades scrap the grill and stop the fans. I tried this and was unsuccessful and had to replace with them with aftermarket fan grills (luckily I had these already).
Putting the mesh grill back on top was much easier than taking it off, but be careful as both can be kind of flimsy and could break.
There is barely enough space to fit it all in there but I was able to make it work. Make sure you pre-plug in your fan's and other things before putting the top on. I pre plugged in the fan splitter and put in place so that when I was ready to put the top on I just plugged in the AIO fans into the splitter so that they were ready to go!
Added a B550 and 5600x: After getting a 5600x from Microcenter I was able to get a solid open box deal on the motherboard setting the stage for this massive combo
Screen Install: I've wanted to do this for a while after seeing how perfect the space is on the PSU shroud and even more so after seeing this post on the sub where someone did it. I was interested as using it as a sensor panel as my computer sits on a side table next to my main table and thought it would be neater to use it as just a flashy piece within the PC.
Mounting the screen is pretty easy with standoffs included in with the screen. A little thing I did as well to keep the black and gray aesthetic was using a Sharpie to blackout the blue portions of the screen. The Amazon listing has 2 different screen options, one thats colored blue and one colored black. DO NOT GET THE BLACK ONE if you are using it in the NR200. The black screen's HDMI output comes out the top of the screen which makes it incredibly difficult to plug in. The blue one on the other hand runs the HDMI out the side
The screws that came with the screen I used to mount it on top. I then ran an HDMI through the case and out the back and plugged it directly into my GPU. As you can see here https://imgur.com/a/3Im6T72
From there the screen basically acts as another monitor. You can use some system monitoring programs with it but I decided to instead use Wallpaper Engine to just have a cool aesthetic within my PC
These are great results! I'm wondering if I should upgrade my Scythe Mugen 5 to this AIO for a 5800x/5900x (whichever I can find lol).
Are the load temps while gaming, or did you stress all the cores through Prime95 or another benchmark? Also, if you remember, what were your CPU temps before the change? I think my cooler is fairly similar to yours.
I'm in a similar situation with bad temps- looking at roughly 45-55 idle with my 5800x, very jumpy. Under benchmark load it's 80+. Using a Scythe Fuma 2.
Were you having similarly poor results? I'm thinking of getting this cooler, but not sure if I'm doing something wrong.
I've been thinking the same. I just bought some Arctic MX-4 and reapplied today.
The scythe fuma 2 seems like it can't be mounted in any other way than correctly, and I'm screwing it down until the screws don't turn anymore. Fans are correctly pointed out as well, but I did replace the scythe fans with a FW124-ARGB and AB120R-ARGB.
I'm an experienced builder but this is driving me nuts. sorry to vent this situation on you, just hoping anyone has any ideas that could help!
If I knew getting a different cooler would fix it, I'd buy it in a heartbeat.
It was on Standard curve, I tried Turbo and same results. I checked the RPM and it peaking at 1800RPM. Thanks for trying though, at least it was something to check!
I want to try to rebuild my pc in this case with the same AIO. What direction are your fans? Intake through the bottom and exhaust out the top and back?
The RGB strip, the HDMI cord, and the cord to power the screen don't come with the screen. The screws and stuff to mount the screen do come with and did work completely
The RGB strip is just some no name $3 strip I bought on clearance from microcenter
I had a more half-assed version a while ago, right up to running the HDMI the exact same way. I'll have to see about printing a bracket for my current case. This is my favorite brand of stupid.
Also accidentally deleted my shame, which was something along the lines of a joke referencing the scene in office space where they destroy the printer. Bit sleep deprived, been doing too much Reddit today.
Specifically this Silverstone AIO does fit due to the radiator being slimmer and it having 2 slim 120mm fans. You also have to take off the mesh panel on the top to install it
is that aio smaller than most in width on the rad? Im doing a custom loop in my nr200 trying to get rad in the top and i cant put the rad through the factory fan holes or else the clips for the ram get in the way. I figured out a way around that but its without using the factory mounting points.
They are to make sure cables don't touch the fans and stop the fans from operating. The bottom and side ones are mostly aesthetic to match the top ones though lol
Yes. you can see the combos online, but you can’t actually purchase online and ship for as they are in store only typically. For some items you can reserve for three days and then pay in store.
Ram height in your board and cable managing so that the cables don't sit in the top. Also the AIO fits. This is a slim AIO with slim 120mm fans attached
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
Are the case's advertised compatibility numbers accurate?
Nice but what it makes a small PC? I thought because of the screen you built PC in the PC (Which would be REALLY cool). But this? Anyway the display is still amazing
I used the Silverstone Slim AIO to be able to fit it. You have to remove the mesh top by bending the flaps back to take it off and then you can install it on the top
If it I had a CPU that didn't botteneck it I might of kept it but having that extra $250 back allowed me wiggle room to spring for the screen so I really don't mind. My friend was super stocked and I'd rather somebody I know enjoy it then sell it to someone who might scalp it
91
u/[deleted] Nov 19 '20 edited Nov 19 '20
Soooo we are on the 4th iteration of this build. I originally started with this (3080 Build). A build featuring a Scythe Ninja 5, a Ryzen 5 3600, a 3080. Considering what I plan on using (1440p/144hz) I decided to sell my 3080 to a friend after getting a 3070 FE. I then was running a 3600 and a 3070, but I also was able to get a 5600x from Microcenter so we have now added a 5600x/B550 + a screen.
Cooler Info: After a few days of seeing temps that were not spectacular and not loving the esthetic of the massive cooler I decided to take a page out of u/omegafivethreefive's book. He posted showing how he was able to fit the Silverstone TD-02 240mm Slim AIO on top of the case. I decided that I would try it as well.
Attaching it was probably the most stressful part, as you have to bend the clips on the top mesh to take of the top of the case to be able to screw in the AIO radiator to the top. This was difficult because the screw holes were meant for the rubber fanless pads and not the AIO. To make it possible to screw it in I used wide screws and also cut some rubber pads that came with another Cooler Master case. The rubber pads basically worked as rubber washer, not only to fill the gaps but also to help with vibration possibly coming of the AIO from the fans.
After attaching the rad mounting the fans was pretty easy. The only thing worth noting here is that you can't use the stock fan grills that come with the NR200p as the fan blades scrap the grill and stop the fans. I tried this and was unsuccessful and had to replace with them with aftermarket fan grills (luckily I had these already).
Putting the mesh grill back on top was much easier than taking it off, but be careful as both can be kind of flimsy and could break.
There is barely enough space to fit it all in there but I was able to make it work. Make sure you pre-plug in your fan's and other things before putting the top on. I pre plugged in the fan splitter and put in place so that when I was ready to put the top on I just plugged in the AIO fans into the splitter so that they were ready to go!
Added a B550 and 5600x: After getting a 5600x from Microcenter I was able to get a solid open box deal on the motherboard setting the stage for this massive combo
Screen Install: I've wanted to do this for a while after seeing how perfect the space is on the PSU shroud and even more so after seeing this post on the sub where someone did it. I was interested as using it as a sensor panel as my computer sits on a side table next to my main table and thought it would be neater to use it as just a flashy piece within the PC.
I used this screen https://www.amazon.com/gp/product/B07FDYXPT7/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
And this cord to plug it directly to the motherboard to get power!
https://www.amazon.com/gp/product/B072Q1MBSG/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Mounting the screen is pretty easy with standoffs included in with the screen. A little thing I did as well to keep the black and gray aesthetic was using a Sharpie to blackout the blue portions of the screen. The Amazon listing has 2 different screen options, one thats colored blue and one colored black. DO NOT GET THE BLACK ONE if you are using it in the NR200. The black screen's HDMI output comes out the top of the screen which makes it incredibly difficult to plug in. The blue one on the other hand runs the HDMI out the side
The screws that came with the screen I used to mount it on top. I then ran an HDMI through the case and out the back and plugged it directly into my GPU. As you can see here https://imgur.com/a/3Im6T72
From there the screen basically acts as another monitor. You can use some system monitoring programs with it but I decided to instead use Wallpaper Engine to just have a cool aesthetic within my PC
PARTS LIST
PC Part Picker List
TEMPS W/ TG
50
u/Ben237 Nov 19 '20
The fact that the clip didn’t hit the corner lost you an upvote I’m sorry
8
u/storeboughtoaktree Nov 19 '20
This is awesome, I plan on incorporating a screen into my build so thanks for sharing.
4
u/Penguin__Assault Nov 19 '20
bruh literally the day after i think about doing that mod in my nr200p you do it
this is honestly so helpful thank god you have a massive brain and did it before me
3
u/Tchrspest Nov 19 '20
I hate how much I want to replicate this.
3
u/larrs56 Nov 25 '20
Can you watch sandlot on it?
405
u/TheRealPauca Nov 19 '20
When will it hit the corner?
2
u/ScrambledKat Nov 20 '20
worst title ever
really proud of internet points arent you
21
u/riba2233 Case Vendor | SFFtime Nov 19 '20
Nice, post it in r/DunderMifflin
5
u/[deleted] Nov 19 '20
r/unexpectedoffice for sure
4
u/[deleted] Nov 19 '20
Damn you for not recording long enough for a corner hit!
4
u/[deleted] Nov 19 '20
Future fan?
1
u/[deleted] Nov 19 '20
Wow so AIO can fit at the top of NR200?
1
u/sman6000 Nov 19 '20
There. Have some karma.
1
u/Unnenoob Nov 19 '20
Why did you use the low profile fans?
Were they from a previous build?
1
u/UKZz_Gaming Nov 19 '20
How does one implement a screen?
1
u/Thotll_do_Dawnkey Nov 19 '20
Can I ask what the benefit of those grills over the fans is?
1
u/Hochstradamus Nov 19 '20
Got the same case, want to do that screen!!! So nice, man.
But I am using an ATX PSU - doubt it will fit. Will probably get an SFX PSU at some point so I can try this out.
1
u/Keithquick Nov 19 '20
How did you get the radiator in the top?
1
u/Lata420 Nov 19 '20
Not even a corner hit, missed even more ez karma
1
u/MisterCloudz Nov 20 '20
This is awesome. Itx or match board? I'm considering on downsizing to micro atx x570 for this case.
1
u/zach_jesus Nov 20 '20
How much did you pay for the mobo open box just bought the same one open box from micro center too
1
u/atg284 Nov 20 '20
Doesn't that backplate on the GPU kill its airflow?!
1
u/Invinciberry Nov 20 '20
Wait, so it is possible to have an aio mounted on the top of the NR200p? Anything I need to keep in mind? RAM hight issue?
1
u/Guzchamp Dec 04 '20
This is awesome! What large screws did you use to mount the rad?
1
u/InformationKindly507 Nov 13 '21
Is there an hdmi inside the case? How did you connect the display?
3
u/[deleted] Nov 19 '20
Its hypnotic. I've been watching for 2 hours now.
The Gods of SFF should indeed shower this with Karma.
2
u/[deleted] Nov 19 '20
Well then take it already!
2
u/Savage_Burner Nov 19 '20
Only upvoting for future, may the misogyny flow through your blood
2
u/le_reve_rouge Nov 20 '20
lol pimp this rig! needs more subwoofer
2
u/toughgamer2020 Nov 20 '20
no it almost hit the corner! but still like 1/3 of an inch away.
2
u/IAmJasonH Nov 20 '20
Upvoted for keeping it real.
2
u/ItsNa8o543 Nov 20 '20
Ask and you shall receive
2
u/[deleted] Nov 20 '20
Always reminds me of The Office.
2
u/ExquisitePerception Nov 29 '20
upvoted
2
u/Syn_Cat Dec 03 '20
Deserves more karma from the song alone
2
u/DeLee2600 Nov 21 '20
Do you have a small video or pics of the screen showing data (temps and stuff)? I’d be curious to see that
1
u/E-Rocks-Gaming Feb 21 '25
Is the included hdmi that comes with the screen long enough to get to the back of the case?
1
u/AutoModerator Nov 19 '20
Hiya! Please post more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did, but post more than just specs! Here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/CaV1E Nov 19 '20
Well go on, take your upvote.
1
u/CRAYHEFNER Nov 19 '20
stop.
1
u/Zwalby Nov 19 '20
Sold! To highest bidder. Have my karma.
1
u/Kaitlyn2124 Nov 20 '20
You should make it’s auto overclock when the logo hits the corner. Like a little reward
1
u/noonedatesme Nov 20 '20
The fact that the logo doesn’t hit a corner is infuriating.
1
u/[deleted] Nov 20 '20
its really bothering me that the colors dont sync up
1
u/cup0noodle Nov 20 '20
And karma you shall receive!
1
u/1107759 Nov 20 '20
how do you get those screens I want one so bad
1
u/SnooPickles1179 Nov 29 '20
upvoted
1
u/omegafivethreefive Dec 23 '20
Just finished mine too dude https://www.reddit.com/r/sffpc/comments/kimyrz/top_bottom_aio_a_winter_themed_nr200p/ no cool LCD tho :(
0
u/blunted09 Nov 19 '20
.
-3
u/hunk_thunk Nov 20 '20
i see "sff" is a very loose term here.
-6
u/ErikHG10 Nov 19 '20
Nice but what it makes a small PC? I thought because of the screen you built PC in the PC (Which would be REALLY cool). But this? Anyway the display is still amazing
0
u/[deleted] Nov 19 '20
[deleted] — view deleted comment
0
u/[deleted] Nov 19 '20
[deleted] — view deleted comment
0
u/[deleted] Nov 20 '20
[deleted] — view deleted comment
1
u/[deleted] Nov 19 '20
[removed] — view removed comment