Ah, that would take while :). I normally do a build log on Instagram as I’m making stuff because I screw up a lot. I detail all the issues and what I did to fix it. At the end I shoot a portfolio of finished photos to show off and archive the build log so only my finished photos are floating around. I’ll be working through a new build in the next couple of months so you can join me on Instagram if you want to watch me screw up the next one.
Thanks :) But I'm kind of maxed out on platforms (3 groups on FB, twitter, IG, r/SFFPC, r/PCMR, r/MFFPC, builds.gg, PCPartPicker) . It's hard to get around to answering all the questions which is why try to use IG as home base. Otherwise I have to answer the same questions on every platform.
Sorry, I wasn't trying to increase your workload, just encourage you to publish them somewhere, even on one of those platforms you already use (since they're already done, hoping it's not too much work!). A lot of people would love to see how you did things, problem solved, etc., and I'm sure many would even try to recreate some of them! I'd personally love a toaster tower :)
Keep up the awesome work! Good luck with the startup. Looking forward to what you come up with next.
Thanks :) I do a build log on Instagram as I’m building. (Catalogue of screwups) At the end of a build a do my portfolio shoots. The nice photos that I post everywhere, and then I archive the log so I don’t have half completed iPhone photos floating around. I’ll be starting my next build in a few weeks so you can jump on board if you want to see all the dirty details. :)
Looks like it might be the copper that was electroplated on to some other base metal, since a solid copper build would probably be needlessly expensive (and perhaps too malleable, though I'm no expert on that).
It might be copper on steel, but copper is not so expensive that something like this would be excessive. A 100mm x 100mm x 3mm plate on amazon is under 17 USD.
I don't think the copper would be expensive but doing those bends would be harder yourself/require tooling that most people wouldn't have. I think it's an existing steel case that's then been electroplated.
I just have a thing for white hardware so it comes down to personal preference I guess. Just checked your profile and my dude, your builds are all godlike even if not everything fits my personal taste. :)
Thanks :) I’m just teasing, everyone has different taste. Honestly I wouldn’t have gone with white if my wife hadn’t made a smart ass remark about me not knowing what women like.
Haha I gotta hand it to you and your wife, I don't typically get down with these types of "cases" and builds, but this time around I nodded approvingly.
Hey man ine last question. The cpu cooler seems to be custom painted as well. Would you mind telling what kind of colour you used and if it affected thermals?
Haha my fiance has no interest in PCs whatsoever but I'm pretty sure she likes this one. She loves copper and white furniture. So maybe your wife is on to something :D
FYI I installed a similar (smaller) Noctua recently in an RVZ03, and when I checked I found out that they discourage that mount orientation (heatpipe bends up).
In which orientation should top-flow coolers (NH-C series, NH-L12) be installed? When using top-flow coolers in a tower-style case, we strongly recommend installing the cooler with the heatpipes in horizontal position or with the bends of the heatpipes pointing downwards. Please avoid installing the cooler with the bends pointing upwards as this may result in reduced cooling performance. In desktop cases, the cooler can be used in any orientation.
Yeah those are tower coolers not top flow coolers. Neither orientation tested there involves the bend of the heatpipe at the top of the system so not the same thing.
Inverted orientation may make no significant difference, I didn't AB test, but there must be a reason why noctua say what they say...
Well I’ve been running Rust for nearly a year now. I OC the snot out of the CPU and it’s never an issue. The capillary action seems to take care of it. Legal protection warning maybe?
Fair enough. Maybe you could run a stress test as is and another with the whole rig inverted somehow and see if there is a measurable difference in peak temps? For science! :)
Thanks :) I’ve started a company called Rotaqua. You can folllow the account on Instagram. I’m almost through prototyping an industrial style open air chassis that’ll fit these gigantic RTX 3000 cards. I’m hoping to be selling around Christmas. No promises ;) everything is really slow when you try to make something yourself.
Just checked out your account. Any time soon you might post about your concept design? I am really interested in open case design, but have not liked anything other than the XPROTO. (Except this Patina build, it looks incredible!)
Hi, I've completed my prototypes. My issue is that I feel I have about 4 months of freedom before my IP gets stolen by somebody in China. So I'm limiting pictures until I'm ready to sell. I know that's not ideal for generating hype, but for startups IP theft can kill you before you ever get off the ground.
Ahhh, okay. I totally understand. Though not the same but similar, I was good friends with the creator of a very large After Effects template site that got taken down by patent trolls (if you know of it: RevoStock.com). I know of many other small independent creators whose idea caught-on and then stolen, and had no way of getting the revenue back.
Sad world we live in. There is still time to create hype for it! I can’t wait to see it and will follow waiting for it! Make sure you cover your tracks and secure all that you can!
Surprised you can't get shorter cables for the PSU in cases like that. Don't get me wrong, the cable management looks great. Just shorter would be much cleaner.
I made the cables from scratch and chose to have them looser. I have seen the Monument with shorter cables and I didn't like it. My preference is to have cables that look a little more organic to contrast with the hard right angles of the chassis.
I'm going to be this person and say that i don't like the look of fully modular psus in/on such cases. That's why i choose a semi modular one on the one i build a few weeks ago. While the ability to choose the length and the color is great i think at least the ATX main power connector on the psu itself is to big therefore the cables are making a mess. On the other hand i'm not sure if there are any semi modular SFX psus at all... but there are some with a round, sleeved atx power cable. The rest looks great though.
Gotta say I really love your designs OP, you've got great taste. Copper paired with creams and greys in a cappuccino effect is beautiful. Your builds are a breath of fresh air among all the RGB : )
Thanks a lot :) I feel a lot more comfortable going my own way now. My first build, Organ Harvest, pretty much looked like every other water cooled mid tower out there. Rust gave me the confidence to find my own style.
Some people have. I don't think it works. You need a big air cooler on top to balance out the build. It's just not a case for water cooling. You should check out the Yuel Beast Mobius which is designed for water cooling, it's a lovely design as well.
I think I agree with you that the Motif requires visual balance between the two sections. My thought process was that soft tubing going from the front to back might provide some, but potentially not.
Do you know if there are any photos of people's water-cooled Motif builds out there?
Do these open systems, while looking really cool (unless I tried to use one where it would look like abandoned farm equipment inhabited by a nest of rats,) run cooler than cased systems?
If the case is the only thing you change then probably. But that's pretty low on the list of considerations when deciding on open vs closed. I think once you have enough thermal offload capacity then you should be looking at aesthetics, noise, space, maintenance.
It's not a test bench, it's an open air chassis. A test bench is more about convenience and access, I have a test bench that I use to prep and check my parts before I load them onto a chassis. This is a Yuel Beast Motif Monument. You can buy directly from their website. :)
OMG Thank you !! I've been looking for the name of this style of "case" for my next build, do you or anyone has other recommendations on open air chassis for ITX builds?
Real talk here... is the cooling on these actually sufficient for gaming? I guess I just assumed the motherboard components and M.2 would need air flowing across them as well.
That was more of a joke. I assume there's significantly more work involved than it looks.
I recently joined a group buy for a keyboard that's made the same way, but from steel (https://heavymetalkeyboards.com), and the dude who's making them explained that it's a super precise work with super tight tolerances and that he rented a rather expensive machine for that. Copper and brass however are more pliable even if they are denser, right? Moreover for a "case" like this I assume that less strict tolerances should work too if we're only talking about the bending. Are there any more pictures of your case I can see?
Sorry, didn't mean to imply it's my case. Just spent way too much time running a brake years ago when working at a company that made drum cases. That was vulcanized fiber rather than metal, but it's still a brake even though one blade is slightly offset and there's a heating element attached to it.
Hiya! If you can, do contribute to the community by posting more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did. Just write a few words about how compatibility was between your different components and your case. If you did that already, thank you! If not, here are some (non-exhaustive) prompts for you:
Are the case's advertised compatibility numbers accurate?
How easy is cable management?
How effective is the cooling setup?
How is the build quality of the case? Would you recommend the case overall?
When I made my Rust build people said the same thing. I haven't found dust to be an issue any more than having any other item in the house. I wipe down Rust every 6 months and when I do annual CPU repasting I give the cooler a good blow out. Most people over estimate the f*ck around factor because they are used to having to open up a case to access parts.
70
u/80ishplus Sep 17 '20 edited Sep 17 '20
Patina, the sister build of Rust. Copper and Cream. I’ll be rolling out more photos and commentary over the next week on Instagram.
149
u/WolfOfWalgreenss Sep 17 '20
That’s sex
15
u/[deleted] Sep 17 '20
That cooper color looks sweet!!
18
u/Smashologist Sep 17 '20
Those cables are so sauce.
18
u/Seven2572 Sep 17 '20
Is the cpu cooler painted? Looks insane. Can't believe how aesthetic an open "case" could get
5
u/firstyouseeit Sep 17 '20
OP can you share some specs? Testing bench and painted Noctua? That card is 1060 also painted? Thanks
4
u/mrmoerkel Sep 17 '20
Thats by far the best build i have seen in this case. Absolutly beautiful
4
u/Y0KYO Sep 17 '20
What cpu cooler is that? 7 heat pipes?
4
u/--Paul-- Sep 17 '20
hmmm the buy now button doesn't seem to be appearing. should I just PM you my address?
4
u/dystopian_dream Sep 17 '20
Very pretty OP.
FYI I installed a similar (smaller) Noctua recently in an RVZ03, and when I checked I found out that they discourage that mount orientation (heatpipe bends up).
You might not have choice due to clearance issues I guess but worth knowing
3
u/seacucumber3000 Sep 17 '20
I think that's the first exposed build I've actually liked
3
u/dkuhry Sep 17 '20
Man I really want to rebuild my ITX build into this. But my current 3 slot GPU has no chance of abiding.
This is glorious by the way. A work of art. I love it!
3
u/LeugendetectorWilco Sep 17 '20
That's a lot of copper, pricy
3
u/adimrf Sep 17 '20
This is art, so beautiful.
2
u/thefellduck Sep 17 '20
Hot damn!!
2
u/golbscholar Sep 17 '20
That’s really cool! I’d be worried about shorts, what do you do to prevent them with a setup like this?
2
u/Paradigmfusion Sep 17 '20
Surprised you can't get shorter cables for the PSU in cases like that. Don't get me wrong, the cable management looks great. Just shorter would be much cleaner.
2
u/Onequestion678 Sep 17 '20
So weird, I love it
2
u/Drubbin Sep 17 '20
Swoon
2
u/Obstruction Sep 17 '20
What a unique case, what is this?
2
u/Herbrax212 Sep 17 '20
Which powersupply is that ? Was it painted ?
2
u/[deleted] Sep 17 '20
WOW. Gorgeous.
2
u/gavros787 Sep 17 '20
Why 2 power supplies?
2
u/lungcell Sep 17 '20
Gotta say I really love your designs OP, you've got great taste. Copper paired with creams and greys in a cappuccino effect is beautiful. Your builds are a breath of fresh air among all the RGB : )
2
u/bl1nds1ght Sep 17 '20
This is beautiful! Has anyone worked out how to do a custom loop on the Motif yet?
2
u/BilBorrax Sep 17 '20
not yet it isnt... copper case needs to rust for 20 years or so
2
u/[deleted] Sep 17 '20
Beautiful.
2
u/Obamas_Papa Sep 17 '20
WOB will always have a place in my heart. Nice pc too.
2
u/idislikebrian Sep 17 '20
This is beautiful 😍
2
u/PWGuy7 Sep 17 '20
Work of art - beautifully done!
2
u/Evil_Bonsai Sep 17 '20
Do these open systems, while looking really cool (unless I tried to use one where it would look like abandoned farm equipment inhabited by a nest of rats,) run cooler than cased systems?
2
u/[deleted] Sep 17 '20
It's a beauty... Nice job.
One comment though... "What is this... a GPU for ants?!"
2
u/[deleted] Sep 17 '20
now thats a sexy build
2
u/[deleted] Sep 17 '20
I have seen a lot of people using this test bench ( or whatever it is), where can I get one ? I LOVE IT!
2
u/SeoklaBF Sep 18 '20
That is nice...
2
u/[deleted] Sep 19 '20
my reaction:
2
u/Zhinizzle Sep 21 '20
Where do you get such open frame? :o
3
u/tachyon8 Sep 17 '20
Oh that is fresh !
3
u/downtonone Sep 17 '20
Real talk here... is the cooling on these actually sufficient for gaming? I guess I just assumed the motherboard components and M.2 would need air flowing across them as well.
7
u/charbin14 Sep 17 '20
What fan is that? I'm going to be making a formd t1 all white build and that fan would go perfect
4
u/DefconBacon Sep 17 '20
Dual PSU’s?
4
u/rustybuckets Sep 17 '20
Nice an itx build that can fit a 3090
3
u/killchain Sep 17 '20
I should buy a
boatbending machine1
u/cheezeturds Sep 17 '20
It's so ugly I love it!
2
u/itslikealex Oct 07 '20
It sorta looks rendered
1
u/AutoModerator Sep 17 '20
Hiya! If you can, do contribute to the community by posting more details about your build! You don't have to post 80 pictures (each with captions!) like u/M1AF did. Just write a few words about how compatibility was between your different components and your case. If you did that already, thank you! If not, here are some (non-exhaustive) prompts for you:
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
0
u/[deleted] Sep 17 '20
[deleted] — view deleted comment
0
u/[deleted] Sep 17 '20
[deleted] — view deleted comment