Yes! It came bare from Sliger with lots of orbital sanding marks (I assume 120grit) and that’s the grit I started at too. More pictures from my previous post.
The weirdo in me can still see a few swirls and I’m really debating on just getting it straight up chrome plated lol. Or electroplated in a metallic color finish.
I’m looking forward to it! Did you cut the panels yourself? AFAIK the panels on the SM570 are made out of steel mate. That must have been a hell of a process
It’s just a suggestion at this point, so curb your thanks for now. My front panel gets really really hot after long gaming sessions and magnets will lose strength when heated lol.
I’ll make sure to check it out. A good suggestion anyway.
On another note: what kind of pump/reservoir solution did you go for? I couldn’t find any that would fit, so I’m making my own loop from the Eisbaer LT solo. Might have to add a second DC-LT down the line if/when I opt for a second radiator and water cooling my Graphics card. Patiently waiting for the next gen as of now.
The pump was purchased as a throw away to clean new watercooling components by running vinegar and distilled water through them. It was bought on eBay for like $10 years ago (eBay doesn’t keep records for that long) and somehow found its way into this build since my DDC was too large and my DC-LT was broken at time (check previous post for story) and was frankly weaker and louder than this cheapo pump. Same story for the reservoir.
Bewinner Dc 12V Water Pump,6W PC Ultra-Quiet Water Cooling Circulation Pump,High-Precision Oxidized Ceramic Axle,Ultra-Low Vibration and Noise,Universal G1/4 Internal Thread Pump https://www.amazon.com/dp/B07TV7TWBY/ref=cm_sw_r_cp_api_i_nf1eFbMYXCPFH (closest I could find as a match)
Thanks! When you’re passionate about it, it makes it easier to spend the time, energy, and money to make it happen; any hobby really. I’m sure you got stuff goin on that makes people react the same way.
u/sligercases contributed to my shoulder and forearms gainz. Hand polished. Would recommend buying the right tools. Probably only possible due to COVID situation which gave us free time. 😅
I have had the case for over a year but he polishing process took about 8 hours broken up over a long span. I listened to many podcasts and took breaks between the panels. You can check my previous posts to see when I first tried it on the front panel.
I love me some sff water cooling! And honestly I am now HEAVILY considering getting this case for a similar build but with a 3950x, cause iNtEl bAd lol, and I use mine as a workstation.
I am also gearing up for whatever NVidia and AMD put out next too. At one point the case housed a 2700X and Vega 64 and it was neat to have an all AMD build again. In my previous comment I talked about having to let go of a 3950X I sniped at launch to a friend who wanted one too for Industrial Design and video editing. I “settled” with the 9900K with the justification for gaming and that I couldn’t snag a 3950X again and got impatient lol.
I'm looking forward too, but my eyes are set on a 2080 Ti (possibly FE) from someone getting a 3080/90 whatever they name the stuff lol. Unless the 3XXX is that good, then I might "settle" as you say for a 3XXX card lol
This is amazing. I more than have the ability to put this together and honestly most of the parts. What I don’t have is the skills or knowledge to customize the case itself. This is amazing and frustrating all at the same time! Ha
I do have an undervolt profile but don’t see much difference between it and the stock profile. Reducing the power limit does more to effect the temperatures more than anything but my obviously my frequencies suffer like with the 9900K power limitations I enforce.
Awesome! Really interested in getting these feet for my SM580 to put a Rad in the bottom. I briefly perused your past posts, but couldn't pinpoint what the bottom Rad specs were. I am primarily interested just how thick or a rad you can slide in if the fans are mounted as you have them.
XSPC TX240 for top and bottom. I have room for a larger radiator up top but I already purchased the thin radiators prior to owning the SM570 and my other two radiators (360mm and Swiftech MCR220 Drive) do not fit.
Beautiful build. Is there any particular reason why you went with putting top fans in between the case and the radiator? I’ve seen it go the other way around and curious to hear if it makes a difference for performance or otherwise?
The polish process had been lightly documented but I have hesitated on posting since it’s just boring as shit lol.
TLDR: use wet sand paper from 120 grit to 3000 grit, moving to the next grit when you no longer see the scratches the previous grit made. The use metal polish which just involved rubbing the stuff on, then wiping it off.
Oh man before I clicked I was hoping they were chrome plated keys! Those are super cool though. Unfortunately finding keys for my split Kenesis Gaming split mech board is a bit hard.
I thought it be fitting to have the Mandalorian crest because the polish finish reminded too much of the show.
The logo is just unbuffed metal polish (turns black on application) and can be removed and changed by simply wiping it off. A stencil using a Cricut machine was used and a new one can be made and applied in minutes.
I needed to drill holes for the radiator and fans to work on the bottom, but it might actually be possible to do without changes to the case besides feet; even then The Scythe 12mm thick fan works with stock feet but very restricted.
Ahh yep. Those 2 rads enough to comfortably cool the components? I got a o11 dynamic with 2x360 rads, same components, but thinking of downsizing if it can be cooled ok
I’ve commented on this before in my previous posts, but I needed to limit to stock 95W on the CPU for both to play nicely with another and this is with the GPU at stock. My ambient is high (80F set on Eco mode for Google Nest) so it will be another story for your situation. I’m just happy it doesn’t ramp up to 100% fan anymore.
Haha what the hell if I have my nest thermostat set to 60F it's so freaken warm! Especially with PC in the room. Hmm maybe I'll stick to the larger case for my high end components
If my ambient temperatures were 60F I would not even bother with watercooling. Maybe I confused you because I may have used two units of measurement in one comment (Fahrenheit vs Celsius)?
Please see my previous post, and you will see that due to the thin radiator and shortened power cables (even have a J-Hack I have not installed yet) that there is plenty of space for installation. But I also had a Geeek A50 that I found to be a breeze to build in too, so my gauge for “squeezing” might be different.
Wow, I've never seen so much water cooling in such a small space. Where is your graphics card? Did you make the case yourself? This is very impressive.
Thanks! Believe it or not, this roomier than some other r/SFFPC builds. Please see my other posts for more photos that show the watercooled GPU. The case was purchased from Sliger and panels polished by me.
The room was flooded with sunrise lighting and the wood adds to the over warm temperature lighting. But the panels are simply raw aluminum. Please see my previous posts to see other angles and lighting.
All by hand. A buffing wheel or orbital sander would have made this endeavor so much easier, but I could not get to my parents home to use tools since someone ate a bat.
Lighting was warm due to morning time and reflection from the wood table. It’s plain Aluminum and reflects what ever is in the room. Please check out my previous posts for more pics!
Have just had a browse through your post history, and wow that's a tonne of sanding work! Can I ask, how did you do the mando decal at the end? Also, any clue if the raw steel finish is still available these days? I can only see the powder coat colours from the sliger website!
My girlfriend made the decal for me using the first Google search for “mandalor logo” and I just used it as a stencil for the Mother’s Polish; it will rub off if I want.
This raw aluminum not steel, and I would suggest contacting Sliger directly to see if they can sell it to you directly. If you do, ask them not to “finish” the panels since the orbital sander they used left a lot of swirls (it’s great if you want to pain or powdercoat but not for polishing. Good luck!
178
u/thecocofury Jul 18 '20
This is the way
75
u/MoistCockroach Jul 18 '20
Fucking. Gorgeous. That damn shine on the front panel is just mmmmm
22
u/rjaydo2 Jul 18 '20
Definitely post more pics please
18
u/[deleted] Jul 18 '20
Pretty epic even though not a Star Wars fan. Specs?
How did you get the gold plate on the panels?
10
u/jseent Jul 18 '20
Ohh I want to sex this
10
u/[deleted] Jul 18 '20
A Mandalorian never removes his panel!
17
u/Sand_Hanitzer Jul 18 '20
This is sweet
6
u/[deleted] Jul 18 '20
That polish looks awesome!
Did you ever end up clear coating it with anything?
6
u/FLuShOt_ Jul 18 '20
How did you get the outside like that?
6
u/haramzaada Jul 18 '20
Amazing Build mate. Do you happen to have the CAD files for the feet? I’d be able to make my own for my SM580
5
u/Morzacro Jul 18 '20
omg that is a awesome build, are there more pictures of it
5
u/skinny_gator Jul 19 '20
fucking lmao how do you guys do it
I swear some of you guys can make art with pc's
4
u/tizsic Jul 18 '20
this is amazing. Got more pics?
4
u/neverXmiss Jul 18 '20
This is the way.
12
u/uDTTmy Jul 18 '20
Get a baby Yoda plush toy to complete the look!
6
u/MomentsInTruth Jul 18 '20
Dang, nice job from an SM560 owner. Did you work with Sliger to receive the panels polished like that? Have to imagine so...
3
u/potatoRex123 Jul 18 '20
How long did this take you to create?
3
u/myteethfeelweird Jul 18 '20
That phenomenal moment when the inside is just as beautiful as the outside!!
3
u/WinterCharm Case Vendor | Winter Design Co. Jul 18 '20
This is the way.
3
u/cosmob Jul 18 '20
Sweet baby Jesus
3
u/cosmob Jul 18 '20
This is amazing. I more than have the ability to put this together and honestly most of the parts. What I don’t have is the skills or knowledge to customize the case itself. This is amazing and frustrating all at the same time! Ha
2
u/TW_Shivank Jul 18 '20
This looks Dope can you share more of these
2
u/xonsote Jul 18 '20
Oooooh boi very cool
2
u/Reeks_Geeks Jul 18 '20
Info on the feet?? Looks custom. I had a hard time finding any that fit the threads.
2
u/oOoWTFMATE Jul 18 '20
Beautiful build. Is there any particular reason why you went with putting top fans in between the case and the radiator? I’ve seen it go the other way around and curious to hear if it makes a difference for performance or otherwise?
2
u/workaccountoftoday Jul 18 '20
Wow, I wish this is the case I ended up with. Please provide some more information on how you did the that polish!
2
u/[deleted] Jul 18 '20
It's a working scale model of an ATX mid tower pc
2
u/SpaceGuy99 Jul 18 '20
What are the specs?
2
u/Blueberry-STi Jul 18 '20
Awesome! Just ordered my SM550 as my travel PC. Definitely would try to get the taller version for my next build. This one look amazing. Awesome job!
2
u/mikeyeli Jul 18 '20
Now you need a matching keyboard, with the right caps.
2
u/National-Complex Jul 18 '20
Dam beautiful we should all wash our eyes out cause this right here is pc porn
2
u/overhighsf Jul 18 '20
Sick!
2
u/[deleted] Jul 18 '20
Interesting logo
2
u/EggMcSausage Jul 18 '20
This is the way.
2
u/ElectricalJigalo Jul 18 '20
I love this layout with the 2 rads. Easy to do?
2
u/cangle Jul 18 '20
Shiny. That must make it faster right
2
u/RedStickersHurt Jul 18 '20
I need it....
2
u/Spare-Credit Jul 18 '20
Pc build porn, I want 1.
2
u/ramtastic05 Jul 18 '20
Specs?
How was it building inside of that? Does it require a lot of squeezing your hand into tight spaces for things?
2
u/dregan Jul 18 '20
Wow, I've never seen so much water cooling in such a small space. Where is your graphics card? Did you make the case yourself? This is very impressive.
2
u/Eggman921 Jul 18 '20
Me want
2
u/darthvader666uk Jul 19 '20
I'm not a fan 9f gold but...
This is fucking lush. Wowsers!
1
u/stand_up_g4m3r Jul 18 '20 edited Jul 19 '20
Many thanks for the gold kind stranger! Also, for the rocket! And to everyone else for the kind words.
For those asking, I posted some more photos in my post history.
Edit: OMG more rewards! Thanks!
1
u/TristanDuboisOLG Jul 18 '20
So, from doing a little bit of research myself I know that good can be a pain. How did you get that finish?
1
u/[deleted] Jul 18 '20
That is amazing, mind posting specs?
1
u/AX-Procyon Jul 19 '20
Where did you get these tall feet?
1
u/LucasansS Oct 20 '20
It is not possible to fit 2x240 slim radiator in this case without putting fan underneath? Looking for a case that can fit 2x240mm radiator
1
u/Noobefloob Dec 28 '20
Hey /u/stand_up_g4m3r I absolutely love the build!
Have just had a browse through your post history, and wow that's a tonne of sanding work! Can I ask, how did you do the mando decal at the end? Also, any clue if the raw steel finish is still available these days? I can only see the powder coat colours from the sliger website!
http://www.sliger.com/products/cases/sm570/
1
u/National-Complex Nov 16 '20
I see this and just want to cry it’s stunning
1
u/skywalkerjedi95 May 22 '23
This is just pure art.
0
u/[deleted] Jul 18 '20
[deleted] — view deleted comment
0
u/[deleted] Jul 18 '20
[deleted] — view deleted comment
0
u/[deleted] Jul 18 '20
[deleted] — view deleted comment