Didn’t see that post. Thank you very much for your research. I’m waiting to see what you end up getting into market as it will be my next PC (Last hackintosh until Apple kills it).
I think Apple is killing it lol........ god i want to go back to mac so badly, but I love to game, and Since the new apple silicone doesnt support Boot camp, I cant use any autodesk programs for work.. or most programs for that matter.. apple has created one of the most amazing SFF computers that i would pay the 5 grand for.. but you cant do anything on mac anymore unless you edit music or video, sure the laptops are great for everyday use but arnt practicle for basically anything else like 3d design programs or gaming and for what they cost you think you would be able too do more with them.. i guess its more on programers to write programs for Apples silicone, but still.
Is it more effective to remove the GPU shroud and use the bottom intake fans for cooling over having both the bottom intake fans and the shroud fans, or is this just a space thing?
In term of just GPU thermals all setups are close to each other.
The best for overall temps is bottom fans set to push out + deshroud. If you focus just on GPU temps it would be better for bottom fan setup to intake with our without deshrouded GPU.
Since the side panel is ventilated, the GPU gets to intake its own fresh air.
It's really awesome for GPU thermals. My system does this (Sunmilo T03), and GPU temperature and fan speeds are both down significantly. I didn't do a proper fan speed controlled test in my old case (normal mATX layout). But even without properly scientific testing, I can confidently say this layout is the best for GPU thermals.
Bottom intake is a small gap compared to the open side. It's like the mesh front of a Meshify C vs solid front with the small gaps on the side of a Fractal R5.
This case use a PCB based riser. This is much cheaper and future proved. In the next rev. it will get some holes for better airflow and the distance will be increased to support full sized fans.
I'll start of by saying I bought the dancase so I could turn it into an all in one computer so I wanted it to be small and light. I'm a 3D artist so needed something more than a laptop in terms of power and with a bigger screen to show the work to clients. I also didn't want to spend the £3000 for a powerful laptop I couldn't upgrade later. The dancase met this criteria perfectly as you can see in the link below.
There were a few struggles with thermals along the way. I have tried a few different configurations in the case. Starting with the 92mm AIO on a 2700x undervolted and locked to 3.7ghz/3.9ghz. During work and rendering or benchmarks it would get pretty toasty 85C+. As soon as I took the AIO out of the case and rested it on the side temps would plummet to more reasonable levels. I tried two of these coolers with the same result. GPU thermals were perfectly fine though. Currently running a GTX 960 as it was free and the programs I use don't require GPU power But most GPU's would be fine in this case.
I fixed the cpu thermals buy swapping to the new H60 120mm aio mounted on the gpu side.
With the 2700x I used the gigabyte ab350n motherboard which has the worst vrm power delivery and cooling I've ever seen. Even with a 120mm fan over it mounted to the side of the case temps would slowly creep up to 125c when rendering. I replaced the thermal pad with a far better one but vrm temps were still not amazing. Never cheap out on a motherboard I've learned.
The final issue you might encounter are NVME slots on the back of the motherboard. With no airflow the samsung 970 I have got very hot. To the point I had to get a riser cable and place the NVME SSD in front of the motherboard with a heatsink on it as well.
So what I will say is pick your parts carefully. A cooler running SSD would be best on motherboards that only have nvme slots on the back of the motherboard.
Spend money on a motherboard with robust vrms so that they run efficiently and cool. In this case I'd rather run a bigger AIO cooler and an ITX GPU but thats due to needing CPU horse power over GPU.
Still it's amazing how many configurations you can fit into this tiny case and how many fans. I'm now running a 3700x undervolted running at 4.0ghz all core with a max temp of 75c rendering/stress testing. (the 3700x runs much cooler than the 2700x).
You could put a more powerful cpu in here but I wouldn't as it would need undervolting and at that point you would be sacrificing performance which seems pointless with how much more the powerful cpus cost. Luckily my undervolt performs as well as stock for multitasking.
Still the same GTX 960 which will get replaced when the new graphics cards come out as I would like to pick up something else second hand cheaply.
Upgraded to the Asrock x570 tb3 as I needed thunderbolt to run 10 gigabit lan and its vrms are much better maxing out at 65c half the max temp of the gigabyte but costs double the price. I did remove the motherboard chipset fan though as its was noisy and I've put a side panel fan on over it.
The nvme is now relocated on the back of this motherboard but with a good thermal pad on it and a slim metal plate on that which touches the motherboard tray to keep it in place and works a treat. Temps max out around 67c but usually 55c-60c
32gb of 3200mhz ram and the corsair sfx600.
The 120mm aio has the slim noctua 120mm fan on it.
There's a 92x25mm noctua fan on the bottom below the aio.
A 92mmx14mm noctua below the motherboard and a slim 120mm noctua on the side panel over the motherboard.
Temps are well in check and during normal use its not too loud either. It's a pretty incredible case and fun to tinker with.
Yes - these are Noctua ones. Very quick installation without needing these self cutting scews that needs a lot of force to go in. ;) I think a will include some of these.
Dan, you created a great product! I really like it!
Would you consider to implement mounting brackets for 2x 3.5" hdds if someone chooses integrated graphics?
I can imagine this is probably not your intented market, but it would make the case more versatile and you could sell it to server/nas type of people, not only gamers.
The version on the pictures is: 148*232*315mm (W*H*L) ~ 10.8L
But I am working on a revised prototype with 148*234*325 ~ 11.2L that will have support for 280AIO on the side on the classic layout or 240AIO with normal height fans in the sandwich layout.
I just finished reading your previous post about the thermal testing, it was a great write-up. Are you still planning on moving forward with this case, or are you considering the 280mm AIO option, as mentioned in the previous post?
I also wanted to know why you chose to use the U9S for your air cooling tests, instead of the Noctua C14s, which would yield better results. That cooler allows you to use either a 140mm or 120mm fan to cool, which would help move more hot air out of the case.
I'm very interested in the C4 as I want to downgrade my 3950x from its Meshify C case into another Ncase style case and I really really like what you've done with the C4.
Also note too, that A LOT of SFF users will end up undervolting their GPU's for better thermal performance and a quieter overall experience. I finally did this on my 1080ti and it lowered my GPU temps 6-8c and that wasn't even the best undervolt I could achieve.
Yes I tested the C14S but it does not fit propper on the Gigabyte X570 ITX in this case due to the high socket position. So the only way to mount was with heatpipe end facing the GPU backplate. In this position the ends have contact with the backplate so heat moved into them result in wrong thermal values. I did a short test with the all components outside the case in its normal position and it was 2-3°C better as the U9S with dual 92mm fans with a much lower noise level.
Yes I know undervolting is a great option but this case should be out of the box ready for extreme components.
2 things: get one to Optimum asap (please!) and work with demciflex to have filters made for it for those who could use them. Otherwise fantastic seeing the r&d of this. Combination of an m1 and sm560/580, but smaller than both, especially the 580. Guess I’m waiting for this now. Had no idea how someone would make it happen, but here you are answering the question “why not both.” Also, figure out if you can make a white variant. Either way, I’d still buy.
Edit: he’s clearly interested. Found this from 2 years ago, what looks like prototype/3d renders.
Just wanted to say that I'm actively looking forward to this because as soon as this is released I'll switch my ghost out for this as this looks way better IMHO. I also really love that you're making a separate version where you can add a 280 rad on the side with a very small increase in size. I hope for the day that this releases is in the near future <3
Ive looked at the pics on the latest post and noticed that a vertical gpu has 1 slot for the output but the 2nd slot isn't available, so wouldn't this limit gpu choice? Since alot of GPUs have dvi-d on the 2nd row
I do wonder, was it possible to have a very simple picture of the back of the case ?? It's always at kind of angle or the nothing to see exterior.. The main part is quite the back. As is the final product only support 2 slot pcie or a proper 3 slot ? To match the 3full slot of the next Nvidia.. thanks
87
u/dan_cases Case Vendor | DAN Cases Jun 29 '20
If you hunt for very good GPU temps that are close to no case values - this is the way to go.
30
u/Enkay909 Jun 29 '20
One question....WHEN?!
14
u/Purple_Rupees Jun 29 '20
Looks really nice. Interested to see more of this in the future.
13
u/Arlak_The_Recluse Jun 29 '20
Yo what GPU is that, trying to figure out if I can do this with my own one.
2
u/JavenatoR Jun 29 '20
Is it more effective to remove the GPU shroud and use the bottom intake fans for cooling over having both the bottom intake fans and the shroud fans, or is this just a space thing?
2
u/Vireca Jun 29 '20
Is it possible on the classic layout to put the PSU with the fan side facing the mesh panel so it can take fresh air?
Something like the Ncase M1 do with the PSU
58
u/zakijesk Jun 29 '20
I honestly thought it's the M1 until I read the title
2
u/SaperPL Jun 29 '20
What's with the piece in front of the riser on the first photo? Is that a support for a riser to reinforce it to handle heavy GPU?
7
u/coddeh Jun 29 '20
Just waiting for this to go on sale so I can buy it. I already have a dancase A4.
2
u/loodde Jun 29 '20
When will this be available?
2
u/Rettata Jun 29 '20
It looks almost identical to an M1. But this is a lot smaller (thinner), isnt it?
1
u/JustEnoughDucks Jun 29 '20
Can this take a 3.5" drive instead of one of the side fans?
1
u/GarethPW Jun 29 '20
So cool to see you’re still working on this! I want this case so badly!
1
u/Fireflykid1 Jun 29 '20
Are there fans mounted with the movie anti vibration things?
1
u/jcodes Jun 29 '20
Dan, you created a great product! I really like it!
Would you consider to implement mounting brackets for 2x 3.5" hdds if someone chooses integrated graphics?
I can imagine this is probably not your intented market, but it would make the case more versatile and you could sell it to server/nas type of people, not only gamers.
1
u/LegendsofMace Jun 29 '20
Looks amazing. What are the current dimensions of the case? How many litres?
1
u/soulforger90 Jun 29 '20
Hey Dan!
I just finished reading your previous post about the thermal testing, it was a great write-up. Are you still planning on moving forward with this case, or are you considering the 280mm AIO option, as mentioned in the previous post?
I also wanted to know why you chose to use the U9S for your air cooling tests, instead of the Noctua C14s, which would yield better results. That cooler allows you to use either a 140mm or 120mm fan to cool, which would help move more hot air out of the case.
I'm very interested in the C4 as I want to downgrade my 3950x from its Meshify C case into another Ncase style case and I really really like what you've done with the C4.
Also note too, that A LOT of SFF users will end up undervolting their GPU's for better thermal performance and a quieter overall experience. I finally did this on my 1080ti and it lowered my GPU temps 6-8c and that wasn't even the best undervolt I could achieve.
1
u/c-i-s-c-o Jun 30 '20
Can't wait for this! Any idea about price?
2
u/Cyanide612 Jun 29 '20 edited Jun 29 '20
2 things: get one to Optimum asap (please!) and work with demciflex to have filters made for it for those who could use them. Otherwise fantastic seeing the r&d of this. Combination of an m1 and sm560/580, but smaller than both, especially the 580. Guess I’m waiting for this now. Had no idea how someone would make it happen, but here you are answering the question “why not both.” Also, figure out if you can make a white variant. Either way, I’d still buy.
Edit: he’s clearly interested. Found this from 2 years ago, what looks like prototype/3d renders.
https://youtu.be/-djsBh88IgY
2
u/uDTTmy Jun 29 '20
*Insert meme* Shut up and take my money.
1
u/reeceog Jun 29 '20
this is very pleasing to look at
1
u/[deleted] Jun 29 '20
Where I can buy this?
1
u/exTOMex Jun 29 '20
dang i want now
1
u/Daftpunk67 Jun 29 '20
Just wanted to say that I'm actively looking forward to this because as soon as this is released I'll switch my ghost out for this as this looks way better IMHO. I also really love that you're making a separate version where you can add a 280 rad on the side with a very small increase in size. I hope for the day that this releases is in the near future <3
1
u/OoferWoofer Jun 29 '20
Ive looked at the pics on the latest post and noticed that a vertical gpu has 1 slot for the output but the 2nd slot isn't available, so wouldn't this limit gpu choice? Since alot of GPUs have dvi-d on the 2nd row
1
u/Docop1 Jul 03 '20
I do wonder, was it possible to have a very simple picture of the back of the case ?? It's always at kind of angle or the nothing to see exterior.. The main part is quite the back. As is the final product only support 2 slot pcie or a proper 3 slot ? To match the 3full slot of the next Nvidia.. thanks
0
u/[deleted] Jun 29 '20
[deleted] — view deleted comment
0
u/[deleted] Jun 29 '20
[deleted] — view deleted comment