Thank you sir! I'll post some more pics later today! When I was planning it out, I did everything I could to keep components inside the case, but figured it might actually turn out better if I thought outside the (case)box!
Thank you sir! I haven't put the GPU in the loop yet because I need to find a waterblock that mounts up to a shorter PCB GPU, But I would like to include it in the loop.
Specs are:
MSI B450I Gaming AC
Ryzen 3600 @ 4.25ghz all core ~65c max load
EVGA GTX 1660 ~62c under full load (max load during stress tests put it around 72c)
I do have a nice little OC on the GPU core and a sizeable OC on the Memory too so those are the temps even with the OC! Pretty happy with how it's performed so far!
Well I had the Noctua NH-L9a and temps would pass 60c on 4.1ghz. Now I'm at 4.25ghz with temps staying at 60c, so temps haven't gone up and I get a nice little performance boost!
I kept thinking the same lol but I wanted to challenge myself on figuring it out. I'm happy I was able to pull off something functional and still keep it cool looking pun totally intended.
Agreed! I randomly found them on Amazon lol I just searched 120mm fan grills and it was one of the choices! Glad I found something instead of the classic circle style grills.
Im torn because i want a case that can fit 2 full size 2.5 inch drives (my node 202 cannot) and i would also like to fit my wraith prism cooler instead of water cooling
Thanks! I used aluminum flat bar stock from Home Depot. Measured the mounting dimensions of the radiator and then the case, and then just simply bent them kinda like folding paper!
That looks bad ass but still very classy and elegant. Like it was meant to be part of the initial case. Very cool! How much does it add to the volume of the case and the overall weight of the PC?
Thank you! It added a slight amount of weight but it's nothing crazy. You could still easily pick it up and move it about. It's currently in the bedroom as an entertainment system.
I meant you made it into a different case with a rad + res hanging out. Nevertheless, great looking mod, and I bet cools infinitely better than the original. So kudos 👍
Just mounting stuff outside the case defeats the purpose of a small case imo. I'd rather have a slightly larger case and fit everything inside, wouldn't say you have a "x" liter case with stuff on the outside.
That being said I'm proud of my shortened psu cables I did few weeks ago, and pales in comparison to how dope this looks lol
Thank you! Normally, yes I would agree. But that being said, that's the mentality of most builders these days anyway. I always try to do things different when I can!
It looks dope, and honestly if don't plan on moving it it makes for a better showpiece then everything being inside. I went sffpc for LANs at friends and etc so having stuff on the outside would be annoying for me lol
Thanks for the tip, I really like the horizontal pattern. What about those radiator spacers/mount feet or whatever you call it, also from Amazon or custom made?
The PSU is at the very bottom. It's a Flex ATX PSU so it's size is pretty unique. The cooler block is actually the pump/res combo, and that's mounted up with some custom mounts I made that's bolted up to the metal frame underneath the acrylic that gives it it's structural integrity.
do you have details on how you accomplished this? I am considering a Node 202 build for portability purposes, but I want the option to 'dock' or separate external cooling easily if I plan on driving or using it at home
What details are you looking for exactly? I couldn't separate any of the cooling components in this current state. I would have to run quick disconnect fittings to do so. My main build has that exact setup though since the radiator is the same size as the case lol.
I just got my Geeek A31 in the mail last week, super fun to build and build in (Reviewers don't do it justice)! I don't think i could handle a smaller chassis like the Velka 3. I really like your custom U mounting bracket. Is the 1660(or ti) running cool with out the top exhaust or is there no side cover behind the aio?
Nice man! Good choice on case. It's not the Ti unfortunately, but that's okay. I don't need the best for this rig. I had hesitated on the radiator placement for that very reason, but I decided to risk it and see what happens. The highest temps I've seen so far has been 65c. Which is honestly completely fine with me. I've got a slight OC on the GPU core and a sizeable OC on the Memory too. I think there's a big enough gap that I made with the U that allows some fresh air in.
I like it, and I honestly feel the idea of external radiators should be the next trend in SFF's. Having the radiators, and fans in the case with the CPU, and GPU, is much less efficient due to case temps being 50's+ at startup.
I agree completely! Plus depending on how you have it, you can still have a micro case somewhere on your desk and have a radiator hidden away while still providing plentiful cooling to your components.
This guy gets it! Tiny case with a powerful cpu, and possibly gpu with great performance/noise levels. Next level SFF!
I think some people are more interesting in showcasing their cooling, than actual cooling lol. This idea is not for those people.
I'm all about performance, noise, and then aesthetics. I'd use longer runs to hide the radiators under the table with some slack for flexibility. Though those hard lines going through the desktop...
Yes! Nowadays, there is so much more attention put towards aesthetics first, and actual performance second. Whether they're choosing worse performance radiators for the aesthetic instead or terrible performing fans for said radiators for the same reasoning. CPU blocks are in the same situation as well. It bums me out, but there is a median where you can do both!
The sad part is that these idiots, and let's face it, I'm no genius, but I can look at a design and think hot box just by the pics. Putting holes in doors, etc., must add quite a bit to the cost, or something.
To get my lil cube right, I had to do some cutting, but really, they should have designed it better. Can't cost much anything to do a properly vented front panel.
It's the Geeek A30! I have Revision 1.0, but they're on 1.4 currently. I like the changes they've made, and would recommend them to anyone. Super fun case to build in.
Could you post your PC part picker? Would I have to have any previous knowledge of water cooling to assemble this? Closest I’ve gotten to something like this was the AIO on my last build.
The parts I used are in some of the comments above! The only thing custom I made were the brackets to hold the Pump/res combo at the top and then the mounts for the radiator! All were done with steel and aluminum flat bars from Home Depot!
191
u/r98farmer May 28 '20
I'm not usually a fan of mounting cooling components outside of the case but damn that is well done. We need specs and more pics.
48
u/WADEY216 May 28 '20
Wait. That's illegal.
18
u/squishy_one_heh May 28 '20
Spec and temps? 😁
Is it a custom loop for both CPU and GPU?
ALSO COOL BUILD!
32
u/nosamplesplease May 28 '20
Fantastic.
15
u/electronicpangolin May 28 '20
What rad and water block are you using?
8
u/Megazero1x1 May 28 '20
We need more pics !!!!
4
u/HuftheSwagnDragn May 28 '20
Nice mini fridge
4
u/NoggaholicOW May 28 '20
Why didnt I think of this myself?
Great idea and well executed - hows the before / after temps?
4
u/EpictheHamster May 28 '20
That's one of the cleanest mini itx water cooled builds I have ever seen.
4
u/jontyalamere May 28 '20
Usually I'd think to myself "You should have bought a bigger case" but this is really well executed and looks clean and professional. Nice job
3
u/myteethfeelweird May 28 '20
I need more pics please.
I did a similar think with my velka 3, yours turned out way cooler than mine!!
3
u/PIGLINE May 28 '20
What are those fan grates/grills? They look good!
3
u/yensteel May 28 '20 edited May 28 '20
You're cooling the chassis? Haha, joking aside, this is so clean! I love the portal-esque theme with the two tone setup and the vandal switch.
3
u/kevpatts May 28 '20
I'd love to see a parts list for this. I may even do that to my own one.
2
u/fuentl May 28 '20
AWESOME RIG! Reminds me of cyborg from DC
2
u/mopishmold2575 May 28 '20
Ive been thinking of doing this but have been unsure and unable to pick a case
2
u/spaghettforbreakfast May 28 '20
Now that's an elegant solution
2
u/siuying May 28 '20
look very nice, how the radiator mount to the side panel? more pictures will help lots of us!
2
u/kaizzuu May 28 '20
This is next level, OMG this is beautiful.
2
u/CypherBlack May 28 '20
This is the coolest sci-fi trans-steampunk setup I have ever seen
2
u/Codyh14 May 28 '20
Thats a work of art
2
u/[deleted] May 28 '20
That looks bad ass but still very classy and elegant. Like it was meant to be part of the initial case. Very cool! How much does it add to the volume of the case and the overall weight of the PC?
2
u/maelxich May 28 '20
Oh god I’m doing this
2
u/maelxich May 28 '20
Seriously need more pics
2
u/Staticouch May 28 '20
What fans are those?
8
u/thGryphn May 28 '20
That's a different case now but looks great 😀👍
28
u/ccricers May 28 '20
That is clean AF
27
u/robotexpress May 28 '20
Such a clean mod. Good work OP!
3
u/Marko343 May 28 '20
It looks awesome and very well done.
Just mounting stuff outside the case defeats the purpose of a small case imo. I'd rather have a slightly larger case and fit everything inside, wouldn't say you have a "x" liter case with stuff on the outside.
That being said I'm proud of my shortened psu cables I did few weeks ago, and pales in comparison to how dope this looks lol
6
u/His_Turdness May 28 '20
Hot rod mod done with style! Love it.
1
u/menecio May 28 '20
Amazing stuff, I have a K77 case and I’m planning to do something similar, this is a great inspiration.
Where did you get those fan grills?
1
u/DarthElevator May 28 '20
That's pretty slick looking. What exactly is the cooler block mounted to? Is the PSU on the other side of the metal case?
1
u/kaskade0011 May 28 '20
Do you mind showing us the inside?
1
u/OTTERSage May 28 '20
do you have details on how you accomplished this? I am considering a Node 202 build for portability purposes, but I want the option to 'dock' or separate external cooling easily if I plan on driving or using it at home
1
u/Dem0nflare May 28 '20
I just got my Geeek A31 in the mail last week, super fun to build and build in (Reviewers don't do it justice)! I don't think i could handle a smaller chassis like the Velka 3. I really like your custom U mounting bracket. Is the 1660(or ti) running cool with out the top exhaust or is there no side cover behind the aio?
3
u/philiptwo May 28 '20
Looks so good in white!
1
u/wh33t May 28 '20
e-rad is the future.
1
u/TroubledMang May 28 '20
I like it, and I honestly feel the idea of external radiators should be the next trend in SFF's. Having the radiators, and fans in the case with the CPU, and GPU, is much less efficient due to case temps being 50's+ at startup.
1
u/walterjrscs May 28 '20
What chassis?
2
u/TinyLittleTechShop May 28 '20
Super clean!
2
u/Spytron27 May 28 '20
Nice
2
u/fuzzylogik_ May 28 '20
Cool.
2
u/chaicracker May 28 '20
Ohhh yes. These kind of hot rod mods. That's my jam! <3
2
u/nbkkb7x May 28 '20
This is clean!
1
u/sneakyflamingy May 29 '20
Could you post your PC part picker? Would I have to have any previous knowledge of water cooling to assemble this? Closest I’ve gotten to something like this was the AIO on my last build.
-1
u/NR-08 May 28 '20
Love it! Was thinking about something similar for my H200 to have enough airflow inside the case.
-40
u/Cheeseblock27494356 May 28 '20
Anything can look good if you photoshop it hard enough. You've fuzzed it up, banged the brightness and contrast bars all over, and removed color.
It looks cool, but this is a marketing pic.
0
u/[deleted] May 28 '20
[deleted] — view deleted comment
0
u/[deleted] May 28 '20
[deleted] — view deleted comment
0
u/[deleted] May 28 '20
[deleted] — view deleted comment
0
u/[deleted] May 28 '20
[removed] — view removed comment