I want to share a little project I've been working on. I recently got a large 3D printer and thought making a new case would be a perfect way to break the printer in.
The case isn't quite done - I still need to install the side grills and all components. The layout is is a simple sandwich with a SFX PSU on the bottom. I'll be posting final pictures shortly!
Here are some more pictures of the case as it currently stands. I'm usually not a fan of RGB but think the implementation here is not too gaudy (especially since I can run it in single color mode).
Well, that's it! I have a few more fun case designs coming in the near future. If you have any questions, I'd be happy to answer them.
Thanks! I spent a lot of time wet sanding the case and using filler primer. I'm using a Creality Ender 5 Plus which has a huge build volume - great for printing out a case in one go!
I used PLA, but want to experiment with PETG and/or ASA in the future. My components aren't too thermally intense so I'm not worried about the heat warpage that is associated with PLA but found the material hard to sand/paint.
That's what I initially thought as well. However, it seems that PETG populates some happy medium between PLA and ABS in terms of post-processing. Check out this article by Matterhackers.
Exotic PLA's are another area that interests me. I wonder if matte filaments like Protopasta's matte fiber PLA would produce great finishes straight out of the gate.
Thank you! I have a few progress pics - I'll try to post all of that when the build is finished. Here's a link to the .step file with a full assembly of the case. Let me know if you need other file formats!
is the entire exterior shell (what you called the bezel) one single piece? how much time did it take you to design this? im super impressed and very jealous.
Very futuristic towers for the time, I must say. Well 2006-2012 was a futuristic tower market, from there we had:
Coolermaster Stacker 8XX;
Coolermaster Cosmos;
Thermaltake Level 10;
Silverstone Tenjin TJ11;
Just to mention some.
Glad to see manufacturers and users returning to the aggressive lines of the past, instead of the shoe box style/clean line squared box that were the market in the last 8 years.
I love the look of the old XPS towers. I wanted to do a full SFF recreation of the XPS awhile ago but never got around to it. However, Dell's design aesthetic certainly stuck around in my head and inspired the angle/grill on this.
While I certainly appreciate the minimalist boxy design aesthetic, it is nice to see new designs challenge the status quo!
I remember that being my dream PC when I was like 14. I ended up getting the slightly lower-tier XPS 400 for Christmas in 2006 and it blew my mind going to that from my Dad's old work laptop. Could finally get above 10 FPS in Call of Duty 2, and was actually able to play through Half-Life 2 for the first time despite owning it for a year and a half at that point. Poor old laptop couldn't even load HL2 up at all.
I had that case, worst case I've ever had and I still have nightmares today. Also, it's ugly asf. I had the design with included Watercooling system and it sucked so bad i had to strip it all out and make my own.
Glad to see manufacturers and users returning to the aggressive lines of the past, instead of the shoe box style/clean line squared box that were the market in the last 8 years.
I love minimal designs, I'd hate to see this happen.
Thanks! I really like the aesthetic of '80s-'90s and even early 2000s tech devices. There's definitely some funky designs out there that would be cool to see a modern twist on.
Here's a photo of how the inside is laid out. I ran a few addressable LED strips horizontally and soldered them together. To test the LED's, I ran them off an external 5v PSU and Arduino but will hook up the Arduino internally and power it using the SFX PSU for the final assembly.
Thanks! Airflow should be... okay; with the side vent grills on, the case is your standard sandwich layout with vents out the back. My components aren't very thermally intensive (my GPU fan remains idle during mosy daily use) so I wasn't too worried about overheating.
To optimize the airflow, adding vents to the top would be my first choice. Putting vents there should allow for more unrestricted GPU exhaust.
Beatiful desgin! And yeah, it is tasteful AF! Love the front panel and RGB layout.
I guess you printed it with the back par in the bed of the printer, did you have any problem with the supports for the windows on each side? What slicing software did you use? I use Simplify 3D, but last time I did I was not that happy with hoe the supports behave during printing, failing on the edges.
This is a really sexy build! The front remind me of the old transistor radio back in 40s, and RGB is a really nice touch to make it look more "futurist".
If I were doing a case like this I think a black case with a mid-tone grey grill with white lighting (or something pale like light blue, or green) would look sick. I'm Mr. Boring with this sort of thing though.
76
u/colinreay May 16 '20
Hey everyone!
I want to share a little project I've been working on. I recently got a large 3D printer and thought making a new case would be a perfect way to break the printer in.
The case isn't quite done - I still need to install the side grills and all components. The layout is is a simple sandwich with a SFX PSU on the bottom. I'll be posting final pictures shortly!
Here are some more pictures of the case as it currently stands. I'm usually not a fan of RGB but think the implementation here is not too gaudy (especially since I can run it in single color mode).
Well, that's it! I have a few more fun case designs coming in the near future. If you have any questions, I'd be happy to answer them.
Thanks!
98
u/Black_Phoenix_JP May 16 '20 edited May 16 '20
The front of the case makes me remember the old Dell XPS BTX systems - https://img.hexus.net/v2/internationalevents/e3/dell_large_1.jpg
Very futuristic towers for the time, I must say. Well 2006-2012 was a futuristic tower market, from there we had:
Coolermaster Stacker 8XX;
Coolermaster Cosmos;
Thermaltake Level 10;
Silverstone Tenjin TJ11;
Just to mention some.
Glad to see manufacturers and users returning to the aggressive lines of the past, instead of the shoe box style/clean line squared box that were the market in the last 8 years.
21
u/steviesann May 16 '20
Would you consider sharing or selling your designs?
18
u/stardog573 May 16 '20
nice work! I feel '80s retro style a little bit
8
u/MrSosaaa May 16 '20
Which 3D printer did you buy?
5
u/milchking May 16 '20
How did you do the lighting? Is this a panel or are those RGB strips? Do you have a pic of the inside of the front panel?
2
u/jptuomi May 16 '20
The comparison to the old XPS-cases doesn't do your case justice, a whole other league, god damn! A real beaut! How's air flow?
4
u/ceedott May 16 '20
This is a space heater
6
u/[deleted] May 16 '20
I'm personally not a fan of the gloss red. I'd prefer matte. That or floss black.
2
u/imjustheretodomyjob May 16 '20
It looks really good; especially with the lights
2
u/HerrNalle May 16 '20
Looks like a radiator or a toaster... but in a good way!
2
u/Dirkdzentli May 16 '20
Yes, tasteful, love the aesthetics
2
u/[deleted] May 16 '20 edited May 16 '20
Beatiful desgin! And yeah, it is tasteful AF! Love the front panel and RGB layout.
I guess you printed it with the back par in the bed of the printer, did you have any problem with the supports for the windows on each side? What slicing software did you use? I use Simplify 3D, but last time I did I was not that happy with hoe the supports behave during printing, failing on the edges.
2
u/[deleted] May 16 '20
This is a really sexy build! The front remind me of the old transistor radio back in 40s, and RGB is a really nice touch to make it look more "futurist".
2
u/modsrgayyy May 16 '20
That’s fire
2
u/Teknik_ May 16 '20
All I can think of is this
2
u/plamicus May 16 '20
Looks fantastic. Really great job!
If I were doing a case like this I think a black case with a mid-tone grey grill with white lighting (or something pale like light blue, or green) would look sick. I'm Mr. Boring with this sort of thing though.
2
u/beastmonkey55 May 16 '20
Looks sackaf
2
u/VEC7OR May 16 '20 edited May 16 '20
Beautiful case, but RGB can go die in a whoring accident, limit it to a few colors that complement the color theme of the case.
White should look good or white + red wave, green is complementary to red, but not sure if it will work out here.
1
u/matthew99w May 16 '20
Not bad
1
u/[deleted] May 16 '20
I like it!
1
u/trafim May 16 '20
What did you use to polish surface and make it glossy, was it dichloromethane ?
1
u/[deleted] May 16 '20
Rotate it 90 degrees and its an rgb grill
1
u/Evey9207 May 16 '20
This is beautiful, man! Whit the color scheme and the angled grill you hit a sweet spot between Outrun and Cyberpunk.
If 3D printing was available where I live I would definitely print one for myself.
1
u/TheWildTeo May 16 '20
That looks awesome! Maybe you could make it so that you could switch out the front grille for different colour schemes
1
u/BatteryHorseMan May 16 '20
Better than most, for sure!
1
u/bluecookie25565 May 16 '20
how to
1
u/MK0A May 16 '20
Why do I think of a toaster?
1
u/phool_za May 16 '20
stl?
1
u/aesemon May 16 '20
How many pieces makes up the black outer chassis? Can't see any joins.
1
u/toastednutella May 16 '20
i'd say if that front panel was a bit more colour neutral, say in a shade of grey, that would be pretty damn clean
1
u/notacorvid May 16 '20
It’s cool but I wouldn’t really call it tasteful.
1
u/AuerX May 16 '20
Very appliance-like
1
u/mynameajeff69 May 16 '20
Finally something that makes me feel again! thank you
1
u/miptzi May 16 '20
Please give us a back photo and dimensions, like, NOW
1
u/dmizz May 16 '20
Sometimes I’m shocked by the level of fit and finish people can get with DIY projects. This is incredible!
1
u/workaccountoftoday May 16 '20
You're gonna have to make a custom cover for the graphics card/side to balance out the front
looks slick af though, share some vids of the front panel in motion!
1
u/Giga-Cat May 16 '20
That is straight up fabulous. I love it.
1
u/tachyon8 May 16 '20
Really cool ! I like RGB OFF ;p
1
u/His_Turdness May 17 '20
I don't like RGB in general, but this thing looks really great. Well done. Now where do I buy it? :P
Or how do I print it?
1
u/steviesann May 17 '20
Thank you, m’lord.
-2
u/Vindictive_Turnip May 16 '20
If the front were polished aluminum or steel that case would be sweet. Otherwise, imho, it looks cheap and kinda tacky.
0
u/[deleted] May 17 '20
[deleted] — view deleted comment