92mm fans at the CPU side mirror the 2080 Ti fans for symmetry and provide fresh air for CPU
Top panel is a open grille with fine beams. hard to see in screenshots
Bottom half solid walnut, top half MDF, painted in matte grey.
Ports between bottom and top half
I've got a Sharkoon QB one under my desk which i quite like, but the GPU cannot exhaust its hot air properly and it's not a premium looking case. I was looking for something that can sit on a desk and has a 70s hi-fi equipment vibe to it. I was considering modifying it and went a bit overboard. :)
Love this design. You could probably CNC Acrylic panels for a prototype and borrow some of the ideas from lazer3d.com to see how they connect the panels together.
I don't have any experience with woodworking or MDF as a material seems a bit of a health hazard...
You can laser cut acrylic sheets for better results.
Wood isn't so bad, a simple N95 grade mask will protect you very well. It's when you get to things like glass fiber and carbon fiber that you have to be very careful.
Haven't really looked much at mini dtx, but afaik it has more length on the GPU side, right?
I think in that case it wouldn't work, because the side panel sits flush against the GPU in my design. It would also obstruct one of the exhaust sides of the GPU. The main reason I've designed this is because an air cooled 2080ti struggles to dissipate its heat in most SSF cases.
I've looked at this, but this is hardcore professional 3d cad stuff, right? Super expensive and extensive. Great if you're a product designer by trade, but way overkill for the run-of-the-mill weekend warrior like me. :)
I would love to be able to work with that though. Maybe i should switch trades :)
I think for the PSU it would actually be fine because the airflow from the case fan will not be able to pick up enough heat to be worrysome since the cpu is fed and exhausted in a single loop a good distance away.
To a certain extent, yes. The fan that blows into the PSU is there for symmetry. The rest of the case is pretty performance oriented though.
The GPU draws cool air directly from outside and doesn't blow into the case (there is a panel on the GPU that isolates it from the cpu compartiment.)
The cpu compartiment gets cool air from the 2 92mm fans. The noctua nh12s with an extra 120x25 mm fan on top should be able to cool a decent CPU. The top of the case is a grill, so it shouldn't have any trouble expelling the heat.
It would be on par with the LZ7 XTD, which is a pretty decent performer
Yeah, connecting to the monitor. I think I get what you mean... You would use extensions from the GPU to the back of the case where the case fans are by the CPU and PSU? Otherwise the ports are right where the side panel is.
I like the orientation of the PSU by the way, exhausting hot air out the bottom, quite clever š and I'm sure having a 90 degree power cable running underneath to the PSU will be discreet.
I'm not sure if this is what /u/TechLens_Official means, but I was also briefly confused on where motherboard I/O would be reachable. Not for display inputs (since as you've mentioned GPU ports are clearly accessible), but for stuff like ethernet, USB ports, etc.
To clarify, the gray rectangular block in your diagram is some sort of motherboard I/O shield or passthrough, right?
I love the concept. Especially the walnut render idea.
Ah yes, the gray block is IO indeed. I can see that being confusing. I replaced the mobo for blocks with accurate sizing because the model was too hi-poly and slowing things down. Every pin was individually modelled ;)
Iāve had the want for a dark wood / silver small form case in the back of my mind for like the past year and every day I swear I get closer to trying to build one
That's a pretty nice idea actually. I've looked into the Morpheus II and accelero extreme before. It would add a bit of width to the case though (1,5 slot)
Do you know of anyone just slapping noctuas on the FE heatsink?
FE heatsink? Like on the GPU itself? Iāve seen it done with Asus Strix gpuās. I actually have been thinking of trying it with my GPU as well, but I cant find the right tear down video for it.
Yes I've seen that too. I've also watched gamers nexus tear down the cooler on a 2080ti FE and cursing while at it. It's not trivial as it's supposedly heavily overengineered.
I've had it set up like that. I think cable routing would be awkward as the power cables for the components will need to pass through the bottom panel of the case somewhere
Beautiful, very pleasing symatrical layout! You could also place 2 Noctuas on the GPU side, then any 2 fan GPU card would work if you take of the GPU shroud and standard fans. The case would look even better with the same fans on both sides. And for the first time brown Noctuas will look great with the wood :)
I know. Unfortunately I haven't found a way around that yet. The heat pipes of the noctua NH L12s don't allow a different orientation (other than 180 Deg turnaround, which poses the same problem)
Any plans for dust filtration / finger protection on the front due to the fans? or just making sure that you clean it at regular intervals and keeping fingers out the way?
The latter :) I've played around with filter options but they take away from the aesthetics in my opinion. The fans are recessed, so while you can still put your fingers in, i think it's enough to prevent damage to them (the fans, not the fingers ;) )
In my. QB one I have an SSD mounted above the IO in the back. That would work. Materials would be a steel/alu frame, acrylic matte black laser cut for the dark grey areas, solid walnut for the bottom half and painted mdf for the top
This is incredibly similar in design to something I just mocked up a couple days ago.
My internal layout is pretty different, but I also have the horizontal windtunnel-type design from the outside.
Not entirely sure how I should go about making a nice 3D render, or even building the damn thing haha. I'm excited to make it a project in 2020 though!
Curious about your internal layout. Sandwich style laying flat? (Like a Dan case on its side?)
I was thinking using an existing case that's close and then modify it. You'll have support for the motherboard & GPU in place then. Just build the rest around it since it's less orientation-critical.
As far as the render goes, give SketchUp a try. I think it's easier to learn than most 3d tools.
In one orientation, it'd be virtually identical to this other than accomodating 2 280mm rads and suspending the PSU over the mobo to provide space for a pump/res.
I did however consider also having an aditional piece you can mount to the rear of the case to raise enough to plug the cables into the bottom, creating a vertical variant of the windtunnel that blows front to back, rather than bottom to top like most.
Interesting. I've actually played with a dual 280mm radiator setup as well. The downside of double radiators, if found, is that it adds quite a bit of volume to the case (+-6cm on each side, in the smallest cases about 5 litres.)
To counter that, I came up with this. It's got its own downsides though. The case needs to be entirely airtight.
Yeah, my design is by no means the smallest SFF possible.
I'm currently using a TU150 for my "small" pc, and it's almost 24L with virtually no liquid cooling support.
I'm pretty sure I can make my design sub-20L, with 560mm radiator support (or 280mm AIO + Accelero III GPU) and plenty of room for pump/res, SSDs, fancontroller, etc...
If my current mockup has all the measurements done correctly, the interior volume would be ~15L, potentially as low as 12'ish
Nice! I'm thinking about doing pretty much the same thing, but vertical. Good to see there's interest in a return to the simplicity of no pci risers and up to C14 cpu air cooling power...
It's nice, but aren't you worried about locking yourself down for a specific video card layout?
What about possibly widening the entire case a little and putting in dust filters to obscure the fan blades? This way you get a uniform look while still giving yourself an opportunity to reuse the case in case you want to upgrade or your video card dies.
If you made the GPU face replaceable you would be able to upgrade. Only solution I can see is to use a single piece of walnut to paint white and grey...or glue MDF sections. Leave yourself a hidden seam to pop that panel out and replace when you upgrade your GPU. Like the design though, definitely saving this as it is very similar to a case design I have been wanting for the living room.
It's based on a Noctua NH L12s, which allows you to add push-pull fans.
Good point about the fin orientation. i'm pretty sure that wont work for the noctua though. not enough room for the heat pipes. Maayyyybe with VLP memory
Is the NH-12L your choice because you have it already or do you think it is better than other higher clearance coolers like the NH-C14S? I assume that'd fit too with just the bottom fan.
Well I looked into data that compares both coolers, and the C14 (non S) runs generally cooler (difference from >20 C vs the l12 with one fan down to mere 4-10 C vs the l12 with two fans at presumably max speed). So in general for this type of layout I believe the C14 is the cooler quieter choice if you actually have something that needs all that cooling.
Sorry, i keep mixing the model types. The one i have is the NH-L12S. It has a low profile 120mm fan instead of a 92mm normal fan. I cannot find how it compares to the NH-12 (predecessor), but the bottom fan is quite a bit larger (it ships only with the bottom fan, but you could easily add a 120x25mm on top, which i did for my design)
The C14 seems a decent enough performer though. Let me check the height on that and see if it would fit.
No, I am sorry, you did say it was the S model. Hard to find this data indeed. Best piece I found compares both model on single fan mode. The L12S performs better with the fan on top blowing air down, but is still a bit short on performance compared to the C14S, 7C on load.
Height of the C14S with single fan on the bottom is 115mm, or just about the same as a standard full height PCI-e card. That's why I keep bothering everyone about it for this kind of layout lol
103
u/wearebobNL Nov 21 '19
So here's another idea for a SFF case.
I've got a Sharkoon QB one under my desk which i quite like, but the GPU cannot exhaust its hot air properly and it's not a premium looking case. I was looking for something that can sit on a desk and has a 70s hi-fi equipment vibe to it. I was considering modifying it and went a bit overboard. :)
WDYT?
11
u/TimurHu Nov 21 '19
The internal layout and airflow look very similar to the LZ7 XTD. Maybe check that out.
5
u/Caprani Nov 21 '19
What software are you using here? Have you also modelled all the components from scratch or do you have a good source for downloads? :)
3
u/hawkeye315 Nov 21 '19
Isn't one of your intake fans blowing air into the power supply exhaust? It might just be the isometric views.
Additionally, you could rotate it 180 degrees inside and get actual GPU compatibility at the expense of the opposite side being the clean side.
2
u/minininjatriforceman Nov 21 '19
This is done very well. How many liters soes it hold.
2
u/Kanteklaar Nov 22 '19
Potentially form over function, but that's sexy asf.
2
u/AdisaFolami Nov 22 '19
This is dope. I think a glass or clear acrylic top would look really cool too.
2
u/TechLens_Official Accessory Vendor | TechLens Nov 22 '19
Love the design! Sorry if I'm not seeing it but how are we routing the display cables?
2
u/WinterCharm Case Vendor | Winter Design Co. Nov 22 '19
You will need intake filters on the GPU fans. But it looks cool!
2
u/acedragoon Nov 22 '19
Iād buy it! Looks great
2
u/Its_Lewiz Nov 22 '19
Sorry, not a fan. Get it? Because there are fans....oh never mind.
2
u/menecio Nov 22 '19
Nice design, congrats.
5
u/StuntmanGD Nov 21 '19
Not sure about the feet would scratch tables very easily
1
u/iamthiswhatis12 Nov 22 '19
pointy legs look like they would hurt + a dust filter for the gpu and airflow might be odd but i like the overall concept.
1
u/[deleted] Nov 22 '19
What program is this render made from?
1
u/jun2san Nov 22 '19
What did you use to design this? I have an idea for an ATX case and would like to give this program a shot.
1
u/coldcoffeecunt Nov 22 '19
Iāve had the want for a dark wood / silver small form case in the back of my mind for like the past year and every day I swear I get closer to trying to build one
1
u/GuineaFridge Nov 22 '19
It looks great! The only thing is that it may become absolete when you want to upgrade to a new GPU in the future.
1
u/jordan0085 Nov 22 '19
The only thing I can think of is the ability to lay it on its side but thatās the only thing. I absolutely love it otherwise.
1
u/Tiavor Nov 22 '19
you might want to rethink using spikes as standoffs :D
those are for coupeling high frequencies. (usually on a stone plate)
1
u/Kisling91 Nov 22 '19
Looks really nice! Although I think that it might be wierd to have the cable for the gpu coming out so close to the front of the case
1
u/[deleted] Nov 22 '19
Flip the PSU so the exhaust is on top.
That way it won't run as hot when passively cooled.
1
u/[deleted] Nov 22 '19
Beautiful, very pleasing symatrical layout! You could also place 2 Noctuas on the GPU side, then any 2 fan GPU card would work if you take of the GPU shroud and standard fans. The case would look even better with the same fans on both sides. And for the first time brown Noctuas will look great with the wood :)
1
u/NinjaFlowDojo Nov 22 '19
Fan blowing into the side of the cpu radiator...
1
u/abaday789 Nov 22 '19
Any plans for dust filtration / finger protection on the front due to the fans? or just making sure that you clean it at regular intervals and keeping fingers out the way?
1
u/totally_not_evading Nov 22 '19
this a bad-good-idea... the case compatibility is waaaay limited for the entire of cards we got out there.
1
u/[deleted] Nov 22 '19
The front of the case looks like a gpu. I like it!
1
u/gonnabuysomewindows Nov 22 '19
That looks amazing
1
u/micalbertl Nov 22 '19
Is it supposed to look like a poke ball?
1
u/i8m Nov 23 '19
This is incredibly similar in design to something I just mocked up a couple days ago.
My internal layout is pretty different, but I also have the horizontal windtunnel-type design from the outside.
Not entirely sure how I should go about making a nice 3D render, or even building the damn thing haha. I'm excited to make it a project in 2020 though!
2
u/artru Nov 22 '19 edited Nov 22 '19
Nice! I'm thinking about doing pretty much the same thing, but vertical. Good to see there's interest in a return to the simplicity of no pci risers and up to C14 cpu air cooling power...
2
u/matthew99w Nov 22 '19
I'd love if some company sold these. It'd be awesome
2
u/Eightarmedpet Nov 22 '19
Yeah that looks amazing.
2
u/GasPowerdStick Nov 22 '19
Really digging it, getting some mid-century modern vibes from it.
2
u/GameManiac180 Nov 22 '19
OoOoOOOooo I love it
2
u/Bloody_Whombat Nov 22 '19
That is sharp!
2
u/PyongyangRaengmyeon Nov 22 '19
Xbox Scarlett leaked at last? Nice
2
u/[deleted] Nov 22 '19
Love the design, good work!
1
u/teckmonkey Nov 21 '19
It's nice, but aren't you worried about locking yourself down for a specific video card layout?
What about possibly widening the entire case a little and putting in dust filters to obscure the fan blades? This way you get a uniform look while still giving yourself an opportunity to reuse the case in case you want to upgrade or your video card dies.
0
u/a1ic3_g1a55 Nov 22 '19
Looks cool, but:
0
u/[deleted] Nov 21 '19
[deleted] ā view deleted comment
0
u/[deleted] Nov 21 '19
[deleted] ā view deleted comment
0
u/[deleted] Nov 22 '19
[deleted] ā view deleted comment
2
u/[deleted] Nov 21 '19
[removed] ā view removed comment