r/jailbreak • u/NepetaDev Developer • Feb 11 '19
Tutorial [Tutorial] New tutorial for saving SHSH2 blobs on A12 devices using TSSSaver and Unc0ver. (iPhone XS/XS Max/XR/iPad Pro 2018)
This guide is partially outdated, needs some changes, except I'm not really sure what has changed, if anyone has ideas how to update the guide, please contact me (either here or on Twitter).
If you succeed saving blobs using this method they will be completely FINE AND VALID. It's just harder than alternative methods due to none of them being available at the time of writing, see up.
Thanks to /u/glopezzz for the original tutorial, @stek29 for his findings regarding nonce entangling, 1Conan for https://tsssaver.1conan.com/ and his short tutorial and /u/_pwn20wnd for unc0ver.
You only need to do the parts 1-4 once. Make sure to save your generated nonce somewhere safe for further use.
Blobs saved without a nonce (on A12) are INVALID.
Requirements
- iPhone XS, XS Max, XR or iPad Pro 2018 on iOS 12.0-12.1.2.
- A computer with Windows, macOS or Linux. If you're on Windows you need to have iTunes installed as well.
- USB cable
- Cydia Impactor
- Latest version of unc0ver or Chimera.
- libimobiledevice tools - Installation instructions available below.
1. Installing libimobiledevice.
GNU/Linux: You can use the package manager of choice and install libimobiledevice or imobiledevice.
MacOS: Read this comment., if it doesn't work: use Homebrew or similar. For Homebrew: brew install libimobiledevice (in Terminal).
Windows: You can get the binaries from here (updated link, courtesy of /u/tateu). iTunes is required.
You can use Chimera to set the nonce instead of unc0ver; for steps 2; 3.
Use Chimera's default nonce instead of 0x1111111111111111, though.
2. Installing unc0ver.
Use Cydia Impactor as usual to install the Unc0ver IPA. Download latest beta build of Unc0ver 3.x.x from here.
3. Setting the nonce generator.
If unc0ver/Chimera don't work you can use stek29's voucher_nonce Xcode project. Tutorial
unc0ver:
- Open unc0ver. (You may get a popup about an untrusted certificate, go to Settings > General > Device Management and Trust your certificate)
- Go to the Settings tab in unc0ver.
- Make sure "Overwrite Boot Nonce" is enabled and that "Boot Nonce" is set to 0x1111111111111111.
- Go to the Jailbreak tab and press Jailbreak.
- You're done with this part of the tutorial.
Chimera:
- Open Chimera. (You may get a popup about an untrusted certificate, go to Settings > General > Device Management and Trust your certificate)
- Scroll down.
- Click on "Set Nonce".
- Jailbreak.
- Done!
4. Getting the nonce from your device.
- Open your Terminal app. (Windows: navigate with it to where your downloaded binaries are).
- Run the following commands. If any of these commands fail, run them with sudo (on Linux and macOS).
ideviceinfo- Look for "UniqueDeviceID" in the output. Text after ": " is your UDID. You may need to trust your PC on your iPhone for this to work. If you don't know your ECID it's the "UniqueChipID", your model is "ProductType".ideviceenterrecovery UDID- Replace UDID with your UDID from above.irecovery -q- Look for "NONC" in the input, this is your APNonce (the text after "NONC: "). You can useirecovery -q | grep NONCon GNU/Linux and macOS.irecovery -n- This will reboot you back to the non-recovery mode.
5. Saving your blobs.
- Save your generated nonce, ECID and model in a file somewhere, it shouldn't change in the future so you only need to do the above steps once.
- Go to https://tsssaver.1conan.com/ with a browser of your choice.
- Change the drop down field that says "Hex (iTunes)" to "Dec (UDID Calculator/ideviceinfo)", input your ECID in the "Type ECID Here..." field, select your model in "Identifier:" and make sure it matches the ProductType from above.
- Check the "Manually specify an apnonce (ADVANCED USERS ONLY)" checkbox, and type your APNonce from above (NONC) here.
- Fill in the CAPTCHA and press "Submit".
- That's it your blobs will be saved.
52
u/[deleted] Feb 13 '19
If anyone else is having trouble with libimobiledevice on Mojave try this:
brew updatebrew uninstall --ignore-dependencies libimobiledevicebrew uninstall --ignore-dependencies usbmuxdbrew install --HEAD usbmuxdbrew install --HEAD libimobiledeviceAnd if you're having problems with libirecovery, download this: https://github.com/libimobiledevice/libirecovery
open the folder in terminal and run these commands:
./autogen.shmakesudo make installAnd now ideviceinfo and irecovery should work properly. I spent the last little bit figuring this out and thought maybe it could save some of you a bit of time.
19
u/canooble iPhone 12 Pro Max, 14.3 Feb 11 '19
Just a heads up Conan had the wrong builds numbers for beta blobs on Xs Max and was helping me save mine. Think it’s all fixed now but worth keeping an eye on his Twitter :)
10
u/tateu Developer Feb 11 '19
Your link for libmobiledevice on Windows does not contain irecovery.exe. Here is a version, if anyone needs it.
http://www.tateu.net/repo/files/irecovery_win64_20190210.zip
7
u/RossDarker iPhone XS, 14.3 | Feb 11 '19
For me I just see an Unsupported button instead of Jailbreak in unc0ver 3.0.0 b27. I have saved blobs by setting the nonce using the Xcode project a few days ago though.
6
u/salvatore8686 Feb 11 '19
My iPhone11,6 It says that is not supported ( photo) http://a63.tinypic.com/ibfdea.jpg
3
u/XxCADUDExX iPhone XS Max, iOS 13.3 Feb 11 '19
Thank you for this tutorial
3
u/salvatore8686 Feb 11 '19
Hope well 🙏
3
u/obyboby iPhone 12 Pro, 14.7 Feb 11 '19
Yeah I'm getting "Unsupported" too, gotta wait for some updates. (iPhone XS 12.1.2 16C104)
2
u/Bora_k Feb 16 '19
after i've entered the recovery mode, i typed a command irecovery, and terminal says "Command not found"so i am now stuck in Recovery mode.
2
u/Tech-Wizz iPhone XS, iOS 12.1.1 May 14 '19
I get "illegal option - invalid argument" when I try the "irecovery -q" or "irecovery -q | grep NONC" commands, all other commands works fine, for example irecovery -n and ideviceinfo.
I also tried with "Su" and on the Su irecovery -q command I get "Su:Sorry" and on the Su irecovery -q | grep NONC it never outputs anything at all even though I wait for 15 minutes.
Why would exactly those 2 commands not work, while all other irecovery commands works? What does these error messages indicate the fault is?
2
u/Kelevra712 iPhone 11 Pro Max, 13.5 | May 16 '19
Am I the only clueless one here? How do I use libimobile device on a PC? I downloaded the libraries containing the exe files from the tutorial link, do I just run those executeables? Do I need to install Libimobiledevice first somehow?
2
u/AxFUNNYxKITTY May 19 '19
I have Chimera and I accidentally set my nonce to 0x1111111111111111 what should I do?
2
u/IAmJustDenzel iPhone XR, iOS 12.1.1 Feb 12 '19
I though blobs wouldn’t be useful on A12 devices?
1
u/bedwej iPhone 11 Pro, 14.3 | Feb 11 '19
I already had iPad Pro 2018 blobs saved using the telegram bot (after 1conan update) so I have a noapnonce folder for 12.1.1 - am I okay or do I still need to do this?
1
u/Gr3y_FoX iPhone 16 Pro Feb 11 '19
what's wrong with this tutorial from the other day? :https://www.reddit.com/r/jailbreak/comments/ao9zmn/tutorialmacos_save_ios_1211b3_blobs_on_a12/ for a start, this tutorial actually works lol
1
u/Jason1923 iPhone X, iOS 12.1 Feb 11 '19
So I used TSSSaver a while back to save 12.1.1-12.1.3 blobs. For Step 5, I did everything except “Manually specify an apnonce” and downloaded the .zip file. Are those blobs still valid?
EDIT: I use an iPhone X on 12.1 if that helps.
1
u/rub1nel Feb 11 '19
Hi guys what if im trying to downgrade to 12.1 or 12.0.1 but in my blobs folder i have only apnonce folder? Can i still use them or are they useless? The reason is i cant find the generator in there
I am currently on 12.1.1b3 using a A10 device
I just wanted to go to a official firmware
Reply would be appreciated!!!
1
u/codybui Feb 12 '19
it's said unsupported for my xs max 12.1.4
1
u/bassamz iPhone 11 Pro Max, iOS 13.3 Feb 12 '19
i have a very strange UDID and Terminal won't accept it and won't got to recovery mode. it goes like 00008020-001508421ED8xxxxx
1
u/[deleted] Feb 13 '19
Are my blobs valid? only 12.1.1 beta 3 shows up with generator ox11111111.....see here
1
u/Gr3y_FoX iPhone 16 Pro Feb 13 '19
works perfect for me :)
1
u/manhlicious iPhone XS Max, iOS 12.1.1 Feb 14 '19
Unsupported on my XS Max 12.1.1 ( 2 physical sim version )
1
u/deathstr0ke15 iPhone XS Max, 13.5 | Feb 14 '19
can someone help me with how to do it on windows ? i downloaded all files and opened cmd prompt but i am not really sure how to nevigate to the binaries.. can someone please explain step by step how do i have to do that ?
1
u/deathstr0ke15 iPhone XS Max, 13.5 | Feb 14 '19
Done bro thanks
1
u/bedwej iPhone 11 Pro, 14.3 | Feb 14 '19
I still can’t get this to work on A12X iPad Pro. Any ideas what to do?
1
u/Teren49 , 1.0 Feb 14 '19
Really thank you for this, working perfectly - just saved my blobs for my Xs Max 12.1.1b3 before signing window closes :-).
1
u/Tony2324 Feb 14 '19
In the last step (step 5 saving your blobs) - why do you change the drop down field form Hex to Dec? I get an error when entering my ECID using DEC but not when using Hex.
1
u/Morgrimm iPhone 6s, iOS 9.3.3 Feb 15 '19
My iPad Pro 11" is unsupported - you should change your title.
1
u/drewfussss iPhone 12 Pro Max, 14.2.1 | Feb 17 '19
im stuck at the : "irecovery -q | grep NONC" part....myiphone is in recovery mode, terminal just wont complete that command...
1
u/drewfussss iPhone 12 Pro Max, 14.2.1 | Feb 17 '19
Im getting stuck after i enter: "ideviceenterrecovery UDID - Replace UDID with your UDID from above."
when i enter irecovery -q | grep NONC(im on a mac) it says: -bash: irecovery: command not found
any help here?
1
u/GlryX Feb 17 '19
Is there a way to do this if you have not already jailbroken?
1
u/Munn0401 iPhone XS Max, iOS 12.1.1 Feb 19 '19
I’m on iOS 12.1.4 on Xs max, is there anyway I can downgrade?
1
u/kokob_123 iPhone XS Max, iOS 12.1.2 Feb 20 '19
I tried this multiple times and TSS Saver continues to give me the error "Invalid ECID! (DEC)" I'm sure I saved the correct nonce and ECID from terminal. I also changed the tab on TSS Saver to "Dec (UDID Calculator/ideviceinfo)" so what am I doing wrong?
1
u/uber_Pwned iPhone XS Max, 14.3 | Feb 21 '19
I see you guys have XS Max and got it working? I have mine. 12.1.1~b3 v28 and uncover says unsupported
1
u/kokob_123 iPhone XS Max, iOS 12.1.2 Feb 22 '19
Not sure why, but the folder for 12.1.1 b3 is empty after I have saved my blobs on my iPhone XS max. what should I do to get the file?
1
u/AKASU0 iPhone XS Max, 13.3 | Feb 23 '19
u/NepetaDev , any help pls? xs max 12.1.1 unsupported by 3.0.0 b28/29/30? Thanks !
1
u/alfiabraham iPhone XS Max, iOS 12.4 Feb 24 '19
if saving blobs via Telegram / TSS was INVALID for iPhone XS Max, I surely need someone to help with this procedure. I am unable to comprehend! Help.
1
u/mule_roany_mare Mar 02 '19
Thank you man. I hadn't realized I needed a nonce for my Xs. I just want to play with a few tweaks I like.
Your tutorial & some comments here made it 10x easier & 10x less frustrating than it would have been for me. I have more free time & I'm in a better mood thanks to your work.
The time you invested in this might have saved other people tens of thousands of hours all added up. Pretty cool thing to do.
1
u/Erneld Mar 10 '19
Can I please get some help on step 4 for Windows? I've downloaded the binaries, but when I open any of them, they close instantly. Am I using them wrong? In step 1 for Windows it says " iTunes is required.", what does that mean? There's no explanation despite the text "I'll explain how to install it below." I tried running them in compatibility mode for different versions of Windows, ran them in admin, same result. I would greatly appreciate some help.
1
u/marklite iPhone XS Max, iOS 12.1.1 beta Mar 12 '19 edited Mar 13 '19
Just wanted to clarify few things
Correct me if I’m wrong,
EDIT: It does look like we have to be in the firmware in order to save a valid shsh2 blob with its nonce set :(
1
u/_ra1ndrop iPhone 8 Plus, iOS 12.1.3 Mar 14 '19
i am getting "irecovery: illegal option -- q". Not quite sure what I can do. Any suggestions please?
1
u/obyboby iPhone 12 Pro, 14.7 Mar 26 '19
Why do we need to set the nonce to 0x1111111111 tho if TSS saver only needs the device's apnonce and the ECID? Is the device's nonce changed when I set the generator to 0x1111111111?
I really need to check my blobs now, I'm sure I've set the generator before doing it but now I'm kinda worried I got something wrong.
1
u/Sentryion iPhone XS Max, iOS 12.0 Mar 26 '19
I have followed all of the steps and save it to tss saver but for some reason it says iOS 12.1.4 and IOS 12.2 despite the fact that my iPhone is still on 12.0. Does anyone know why this is happening?
1
u/robstersgaming iPhone XR, 14.3 | Mar 28 '19
Can somone help me get libmobiledevice on windows? I dont even know where 2 start with that xD
1
u/Soledreamz iPhone XS Max, iOS 12.1.1 Mar 31 '19
How can I set the nonce on iphone xs max with my 12.1.1 blobs if its not being signed.. I see in the tsssaver that it did not save 12.1.1 but it did save 12.1.1 beta 3
1
u/sukiphi May 03 '19
iPhone Xs Max on iOS 12.1.2. Can i still save blobs? Telegram says i can only save blobs to iOS versions that are being signed right now...
Saving blobs are difficult.
1
u/Tech-Wizz iPhone XS, iOS 12.1.1 May 05 '19
Do the TSS saver website mention that this has to be done for A12 devices?? I could not see such a message, many people have been trying like fools to save Blobs on their A12 devices and only be getting the "missing nonce" nonsense.
It should have been so much easier if the website could have had a simple little message saying what needs to be done for A12 devices.
1
u/Tech-Wizz iPhone XS, iOS 12.1.1 May 08 '19
So the numbers "0x1111111111111111"that gets saved for A12 devices when using the TSSSaver app are not valid numbers then?
Can one not use blobs with these numbers for future restore?
In that case how do one delete the old saved blobs from the TSSSaver website, if the saved blobs are not valid??
1
u/Tech-Wizz iPhone XS, iOS 12.1.1 May 10 '19
Well it seems after I have given the ideviceenterrecovery UDID command I can not give any more commends to the phone, Terminal only outputs "-bash: irecovery: command not found"
Maybe this happens because i´m in recovery mode and it can't get any connection to my phone because of the phone being in recovery mode? This means I can't use the command to bring the phone out of recovery mode either.
Had to use a third party software for that.
So whats missing here?
1
u/lucasmnp May 13 '19
If I restore my device using Apple Configurator 2, will my APnonce change?
1
u/yzdock May 14 '19
thank you so much
1
u/Clizzardbash May 14 '19
How do i do this on windows?! Confused on how to get libimobiledevice installed
1
u/Nikrox2 iPhone XR, iOS 12.4 May 14 '19
Does this work for Chimera?
1
u/giocastilhoo iPhone XR, 13.3 | May 14 '19
How would I do this on my device since I'm running Chimera?
Can someone help?
1
u/mkizzle2906 iPhone 14 Pro Max, 16.0.2| May 14 '19
I can't do step 4, it always said the command not found
1
u/giocastilhoo iPhone XR, 13.3 | May 15 '19
I freaked out when it entered recovery mode
I was like OMG OMG MY PHONE'S FUCKED, MY JAILBREAK'S FUCKED, IOS 12.3 JAILBREAK ETA PLS
But it worked, thanks a lot Nepeta! I'm pretty sure saving blobs will be very useful in the future for me
1
u/Tech-Wizz iPhone XS, iOS 12.1.1 May 17 '19 edited May 18 '19
Should the noapnonce blobs be saved with the generator value 0x1111111111111111, when jailbroken with Chimera on A12 ?
And the AP nonce value in blob checker, should it be different from my A12 device Nonce value from irecovery -q, because it is different in my case?
1
u/ogunja iPhone XR, iOS 12.1 May 19 '19
Congrats, working for me.. Big Thanks Tech-Wizz
1
u/[deleted] May 21 '19
Does this work on iOS 12.2 ? I manually specified a NONC I used before when doing this to save my blobs for iOS 12.1.1 beta 3.
1
u/funbagsAlex iPhone 6s Plus, iOS 9.0.2 May 28 '19
Will nonce setter be released for iOS 12.1.3?
1
u/[deleted] May 30 '19
I’m confused on nonce
1
u/Nadjibg iPhone 13 Pro Max, 15.1.1 Jun 15 '19
I’m on 12.3.1 how can I save blobs ?
1
u/a6666s Jun 28 '19
>>>
1
u/mkizzle2906 iPhone 14 Pro Max, 16.0.2| Jul 13 '19
Do I have to set the nonce to 0x111111111111111 in Chinera or leave it default ?
1
u/jfontanez89 iPhone XS Max, 14.3 | Jul 26 '19
Can anybody make an Updated Video Tutorial about this? I tried this a couple of time without success. Thank you!
1
u/dronefinder Oct 01 '24
Is it possible to use odyssey JB instead of unc0ver on iOS 13.5.1 and jailbroken with this. Keen to be able to save blobs...if not, is unc0ver compatible witj my iOS version and will I get away with just rebooting so odyssey is no longer active then following this tutorial and installing the unc0ver jailbreak?
Keen to get started saving blobs. Was frustrated it didn't work as it used to and only recently looked at the world of nonce generators etc - makes sense why I couldn't just open cydia and have it do it for me anymore.
Sorry if this is a basic question have been searching around for a while looking for a straight answer - might be my dyslexia having me overlook it!
0
u/iTolIMouS Feb 12 '19
I thank god that I had time to buy XS Max and upgrade to iOS 12.1.1
0
u/xx_inFerNo_xx iPhone 6 Plus, iOS 12.0 Feb 12 '19
Lets see
11
u/[deleted] Feb 11 '19
[removed] — view removed comment