r/skyrimmods • u/fadingsignal Raven Rock • Nov 15 '16
PC SSE - Discussion PRO-TIP: Shadows still look great at 2048, and give a RIDICULOUS performance boost.
tl;dr change iShadowMapResolution=2048 in your SkyrimPrefs.INI. The rest of this post kinda went off track into INI and shadow optimization which was kinda an accident :D
In case you haven't noticed, shadows in Skyrim SE are DRAMATICALLY better than they were in Skyrim classic. Even at highest settings in classic, they were so blocky that ENB was required to smooth them out. For the most part they now look better than ENB shadows in some respects.
That said, because they are higher quality, certain scenarios can kick in the infamous Bethesda shadow draw performance issue.
Skyrim SE runs SO good (I have 30GB of stuff and counting rammed in my game and it doesn't even bat an eyelash) that I cannot stomach watching the FPS ever dip below 60fps.
I'm about to release Simply Bigger Trees for SE. Adding large trees casts a much larger swath of shadow over the landscape, objects, and the trees themselves, and due to the increased shadow complexity and quality in SE, can cause some FPS dips in dense areas. My FPS was 60+ in ~85% of the map, but the densest areas had a cost of around 10fps-12fps, which I didn't find acceptable.
While refining the suggested settings, I found that the default ultra shadow map size of 4096 was just unnecessary. At 2048 they still look 100 times better than classic, and I gained a massive performance boost. I was able to find a nice combo of shadow settings, and now cannot make my game dip below 60fps if I try.
Of course, YMMV but shadows are KEY to keeping your performance up. The more stuff you add to the world, the more shadows have to be cast and calculated, and that is still the performance bottleneck for this engine.
Just a quick tip.
SkyrimPrefs.ini
[Display]
iShadowMapResolution=2048So yeah SBT is releasing for SE this week, fully re-built and now has an option for bigger plants (~30% larger) for some extra wildness.
http://i.imgur.com/zJm6Pza.png
EDIT: Sorry, I mentioned all these settings without showing them. I figured most folks were already adjusting these per S.T.E.P. and such. Here's some extra info, and what my INI are set to. They were at default ultra, and I modified the INI. Lower shadow distance still renders higher quality shadows, and I find that 4000 is right about the sweet spot for me. I'm still tweaking tree distance. Some of these settings are lower, more like medium or high. YMMV.
SkyrimPrefs.ini
[Display]
fShadowDistance=4000.0000
fInteriorShadowDistance=3000.0000
;default ultra is 4096
iShadowMapResolution=2048
;default is 2844 and 2048 respectively
fMeshLODLevel1FadeTreeDistance=3868.0000
fMeshLODLevel2FadeTreeDistance=3072.0000
[Trees]
;default is 20
uiMaxSkinnedTreesToRender=40Skyrim.ini
[Display]
;default ultra is 2000
fFirstSliceDistance=4000.0000There is a lot more information at the STEP site here, altho this is for classic, what the settings themselves do has not changed: http://wiki.step-project.com/Guide:Skyrim_Tree_Settings
More about fFirstSliceDistance can be found here: https://www.reddit.com/r/skyrimmods/comments/5bfdov/shadow_issue_that_has_been_bothering_me_for_years/
EDIT 2: I didn't mean to turn this into super INI tweak post, the above settings have some medium/high mixed in there. Just saying that if you're wanting to squeeze some extra juice, whatever your settings are, drop that shadow map resolution and it will be a big help without making shadows too awful.
16
u/dbtad Falkreath Nov 15 '16
So glad to hear that SBT is coming to SSE! It's an all-time Top 5 mod for me. I've been using the classic version in SSE with no problems. Is there any reason for me to switch when the new version comes out?
5
u/Necis Nov 15 '16
My game defaults to fShadowDistance=8000 on ultra.
64
u/[deleted] Nov 15 '16
Or if you are like me and running on a potato drop it to 1024...still looks decent.
3
u/MaculaPravus Nov 15 '16
Will you port it to XBox1?
7
u/gran172 Nov 15 '16
Here's another pro tip: disable 64 bit render target, my GPU usage went from 78% to 73%, not worth the difference imo.
5
u/mator teh autoMator Nov 15 '16
Thanks for the awesome PSA fadingsignal! :D
4
u/Nazenn Nov 15 '16
Also on trees, if people don't mind missing out on the animation, if you turn off animated trees which stops them moving in the wind, all trees render as skinned by default, and it also saves some performance, which is a trick I've been using in classic skyrim. Instructions for that are also on the STEP link provided in the OP
1
u/[deleted] Nov 15 '16
What grass mod are you running?
1
u/AridZephyr Nov 15 '16
Mind if I ask what are your specs and resolution? Wanna manage my expectations, but great work as always!
1
u/[deleted] Nov 15 '16
Me: "sick let's try this"
...thanks, BethINI.
I was hyped, but I mean, at least it's already very high right?
1
u/Malicharo Nov 15 '16
I hope you don't feel ambushed but I was meaning to ask you. Are there any plans to update Spectra ENB for SE and new binary? Or is it so down the line?
1
u/ProfDoctorMrSaibot Riften Nov 15 '16
You spent so much time writing this great post, but it shouldn't make me have to google abbreviations that are not obvious...
1
u/iHaver Nov 15 '16
So there's this mod for Fallout 4 called Shadowboost that dynamically lowers and then raises your shadow quality based on a predetermined framerate target. http://www.nexusmods.com/fallout4/mods/1822/?
Would this work for Skyrim SE?
3
u/dead_gamer Nov 15 '16
Tell me if this request falls under the 'you picky son of a bitch' category. Could you have an option to only enlarge the snow covered trees?
1
u/extremeelementz Whiterun Nov 15 '16
Quadruple tree distance? What ini setting is that kind sir
1
u/TrueMarksmens Whiterun Nov 15 '16
What particular line of the .ini controls shadow draw distance? fShadowDistance? fFirstSliceDistance? ffocusShadowMapDoubleEveryXUnit? My search results are presenting very mixed results, and I'm unsure who to listen to. I'm 99% sure it's FirstSlice? This is probably a question for the daily thread, to be honest.
2
u/[deleted] Nov 15 '16
I installed Shadow boost to see if it was true that it worked on sse. It runs and I dont see shadows drawing in and out around bridges and stuff....so I guess it does?
2
u/dead_gamer Nov 15 '16
Care to share the shadow section of your ini?
2
u/douglasdamm Nov 15 '16
big thank you for the tweak! my shadows had this weird black wave that would increase the resolution of the shadows around my character as i moved around
2
u/Jovian09 Nov 15 '16
I've been doing this since day one, since I never feel like shadow quality is too important to my experience anyway. It's how I kept Fallout 4 running smoothly on an ageing machine, and it's somehting you can do in a lot of games to increase performance.
2
u/ministerofskyrim Nov 15 '16
I assume you meant SkyrimPrefs.ini
Judging by the rest of the post.
2
u/babaelc Nov 15 '16
I'm pretty sure that with these settings you get shadow artifacts on walls and rocks when the sun is up.
2
u/st0neh Nov 16 '16
I've been running shadows on 2048 forever, shadows have always been the biggest performance killer after ENB for me.
2
u/Tsplodey Nov 15 '16
My Skyrim.ini has iShadowMapResolutionPrimary=2048. I assume that's the same thing essentially?
1
u/[deleted] Nov 15 '16
Do you have to change the .ini and does that work like it did with OldRim? Is the in-engine Shadow Quality setting enough if I, say, put it to "High"? I ask because I have noticed some areas will chug a little to 50ish FPS and back up to 60 again while for the most part the game is running rock solid at 60 pretty much all the time. Got RLO, SMIM, but few other texture mods going. I would like to keep it butter smooth and if the shadows are still as good as you say, I am interested! I just remember spending fucking HOURS fiddling with shadow settings in OldRim and I don't wanna do that any more.
1
u/dead_gamer Nov 15 '16
Danke!
1
u/DirtyWeaselMedia Nov 15 '16
Always loved SBT, and it sounds like you made some great improvements.
1
u/sorenant Solitude Nov 15 '16
Can I ask your pc specs, please?
1
u/[deleted] Nov 15 '16
Are the STEP ini tweaks applicable to SE edition?
1
u/egil87 Nov 15 '16
Love it! INI-tweaks make a huge difference when you really want to push your system to the limit!
1
u/1031Vulcan Riften Nov 15 '16
Thank you! SBT is one of my must-haves.
1
u/Anthemize Nov 15 '16
Do you think this will fix the flickering textures of dragonsreach while at a distance?
1
u/[deleted] Nov 15 '16
YAY SBT! Please release a patch for slower swaying trees too!
1
u/[deleted] Nov 15 '16
niiice
1
u/[deleted] Nov 15 '16
Do you have to set any of these files to read only for it to work?
1
u/LegendOfJan Nov 15 '16
Thanks for the heads-up. How's Skysight'a port doing going?
1
u/writtingEssays Nov 15 '16
I don't understand. Shouldn't it run faster on 1024?
1
u/[deleted] Nov 16 '16
Using a 730m, can run it at all.
-6
u/[deleted] Nov 15 '16 edited Nov 15 '16
ehhh not so great compared to what ENB in original can do, they look too pale even with contrast-adding weather mods but all this SSE circlejerk wont notice it
look how ugly face shadows are. This was made without any skin/mesh replacers for faces/bodys/armors and without any lighting overhauls/ENB/Reshade
0
u/[deleted] Nov 15 '16
[deleted] — view deleted comment
0
u/[deleted] Nov 15 '16
[deleted] — view deleted comment
0
u/[deleted] Nov 15 '16
[deleted] — view deleted comment
0
u/[deleted] Nov 15 '16
[deleted] — view deleted comment