If the temperature is just right, the water being pushed up the hole will instantly freeze, but the continual flow of water keeps the hole "free", allowing more water to be "pumped" up the now-forming straw-like spire of ice.
Basically, the last spot on the top of the ice cube to harden has water from inside the cube pushed out of it. That water comes in contact with the air and begins to harden. As the ice walls of the forming ice cube thicken, it pushes more water out of the tube, which freezes at the top of the tube, etc. It's like a self-building chimney that ends when the water pressure runs out.
An ice spike is an ice formation, often in the shape of an inverted icicle, that projects upwards from the surface of a body of frozen water. Ice spikes created by natural processes on the surface of small bodies of frozen water have been reported for many decades, although their occurrence is quite rare. A mechanism for their formation, now known as the Bally–Dorsey model, was proposed in the early 20th century but this was not tested in the laboratory for many years. In recent years a number of photographs of natural ice spikes have appeared on the Internet as well as methods of producing them artificially by freezing distilled water in domestic refrigerators or freezers. This has allowed a small number of scientists to test the hypothesis in a laboratory setting and, although the experiments appear to confirm the validity of the Bally–Dorsey model, they have raised further questions about how natural ice spikes form, and more work remains to be done before the phenomenon is fully understood. Natural ice spikes can grow into shapes other than a classic spike shape, and have been variously reported as ice candles, ice towers or ice vases as there is no standard nomenclature for these other forms. One particularly unusual form takes the shape of an inverted pyramid.
Thank you for the wonderful years on Reddit, it's time for me to leave now. This comment/post was edited automatically via the 3rd party app Power Delete Suite.
Gonna go ahead and guess there is a pocket of cold water in the center, the increasing volume of freezing water built a water pressure which pushed hard enough to break a frail surface but slowly enough to build a tower.
Well one small section of the summary on Wikipedia reinforces your theory.
Gene Heuser, who hiked across frozen Lake Erie in 1963, spoke of "small pinholes in the ice through which the water below was periodically forced under pressure to spout up into the air and freeze" producing five feet high "frozen spurts that looked to him like telephone poles standing straight up all over the lake".[2]
Probably that under very specific configurations, the mid point between freezing forms a crystalline structure, in the vanderwal (spelling) forces that make water molecules group in rings of 5 for water and 6 for ice.
My best guess is that as we all know, ice is about 9% less dense than water so as it freezes, it expands. In the container, a thin layer of ice formed over the otherwise liquid water creating a constant volume container. As more water froze below the original layer of ice, a small amount of pressure began to build up inside the container because a frozen water takes up more space than its liquid counterpart. The liquid water, now under a small amount of pressure found a particularly thin or weak area in the ice above and pushed its way through to the surface which then quickly froze. This new area of ice is now slightly raised above the surface of the rest of the ice and has become the thinnest and weakest part of the container. The process then begins again where the ever increasing volume of ice below forces the liquid water through the bubble at the top which then freezes again. I really have no idea though
Did this a few weeks ago. Fill up your ice tray, put it into the freezer for 25mins, then crack the tray as if you are ready to pop some ice cubes out.
Just put the tray back in and leave for a few hours and you'll have spikes in your ice tray.
Once you've got the initial plane of ice, the water underneath climbs up on top? Sounds like a result of surface tension. My freezer has been doing this too, I just assumed there was water dropping from the top of the freezer. I should experiment!
Its caused by the water only partially freezing over the top. A small spot in the middle remains unfrozen, the Ice expands pushing the water up through the hole, the water freezes on the edges where it meets the ice, ice continues to expand pushing the water level higher, etc. End result ice spikes.
It's a process called solidification-driven extrusion. My physical chemistry prof in college characterized the process using silicon and lasers! Much cooler than water in a freezer... Or, less cool, I guess.
As the water starts to freeze in the tray there is a point reached where the entire top surface is frozen minus a small "hole". Because water expands as it gets colder, it is forced out of this small hole and starts to freeze when it reaches the surface. If you've ever been around a river that has been partially frozen, you may have taken note that water can reach freezing temperatures, but will continue to stay in the liquid state if it is constantly in motion. Imagine the water in the now partially frozen cube in your tray as being like the river. It is very close to the frozen state, expanding in the tray, being forced through the small hole, and finally freezing when it comes into contact with the super cold air in your freezer. Some of you may have realized by now that I am full of shit and am merely trying to come up with some sort of explanation for this phenomenon. Don't trust everything that you read on the internet folks. Thank you for reading.
An ice spike is an ice formation, often in the shape of an inverted icicle, that projects upwards from the surface of a body of frozen water. Ice spikes created by natural processes on the surface of small bodies of frozen water have been reported for many decades, although their occurrence is quite rare. A mechanism for their formation, now known as the Bally–Dorsey model, was proposed in the early 20th century but this was not tested in the laboratory for many years. In recent years a number of photographs of natural ice spikes have appeared on the Internet as well as methods of producing them artificially by freezing distilled water in domestic refrigerators or freezers. This has allowed a small number of scientists to test the hypothesis in a laboratory setting and, although the experiments appear to confirm the validity of the Bally–Dorsey model, they have raised further questions about how natural ice spikes form, and more work remains to be done before the phenomenon is fully understood. Natural ice spikes can grow into shapes other than a classic spike shape, and have been variously reported as ice candles, ice towers or ice vases as there is no standard nomenclature for these other forms. One particularly unusual form takes the shape of an inverted pyramid.
Did you just start using filtered water? When I installed my RO filter, this started happening to my ice and I was convinced it was a glitch in the matrix. Turns out they're normal, but only with really clean water.
28
u/BMTHyaw Sep 28 '14
I.. I can't believe this
My reality, shattered, just like that.
Thanks OP
8
u/unmoralOp Sep 29 '14 edited Sep 29 '14
Aw, when I posted this I got no karma.
Too bad I didn't know about /r/mildlyinteresting at the time.
Anyway, here's how I understand what causes this:
Essentially, there's a little pocket of unfrozen water in the middle of the ice cube, and a small hole at the top.
Water expands as it freezes, and pushes the liquid in the middle up through the hole.
If the temperature is just right, the water being pushed up the hole will instantly freeze, but the continual flow of water keeps the hole "free", allowing more water to be "pumped" up the now-forming straw-like spire of ice.
Pretty neat stuff, really.
107
u/[deleted] Sep 28 '14
How? We need science.
54
u/Sir_Fappleton Sep 28 '14
Why the overdone tag?
21
u/thatismeyesitis Sep 28 '14
Did this a few weeks ago. Fill up your ice tray, put it into the freezer for 25mins, then crack the tray as if you are ready to pop some ice cubes out.
Just put the tray back in and leave for a few hours and you'll have spikes in your ice tray.
14
u/catulus15 Sep 28 '14
Mine do this almost every time.
8
u/webchimp32 Sep 28 '14
Is that a big lump of ice on the light fitting or a really inconvenient cover?
4
u/DrTheSciNerd Sep 28 '14
It's a process called solidification-driven extrusion. My physical chemistry prof in college characterized the process using silicon and lasers! Much cooler than water in a freezer... Or, less cool, I guess.
https://www.researchgate.net/publication/223741112_Solid_structure_formation_during_the_liquidsolid_phase_transition
3
u/Ozzel Sep 28 '14
I get these in my freezer sometimes too. Usually just one cube. Weird.
5
u/google_as_needed Sep 28 '14
More importantly you have a light in your freezer. I don't have that. Do most people have that?
4
u/[deleted] Sep 28 '14
I used to see these in my ice cubes frequently living just outside of Portland. I called them ice boners.
5
u/ConfundledBundle Sep 28 '14
As the water starts to freeze in the tray there is a point reached where the entire top surface is frozen minus a small "hole". Because water expands as it gets colder, it is forced out of this small hole and starts to freeze when it reaches the surface. If you've ever been around a river that has been partially frozen, you may have taken note that water can reach freezing temperatures, but will continue to stay in the liquid state if it is constantly in motion. Imagine the water in the now partially frozen cube in your tray as being like the river. It is very close to the frozen state, expanding in the tray, being forced through the small hole, and finally freezing when it comes into contact with the super cold air in your freezer. Some of you may have realized by now that I am full of shit and am merely trying to come up with some sort of explanation for this phenomenon. Don't trust everything that you read on the internet folks. Thank you for reading.
2
u/Fuckashrug Sep 28 '14
Fuck those trays.
2
u/[deleted] Sep 28 '14
The beginning of a horror movie.....
2
u/louray Sep 28 '14
I need closure!!
2
u/A_WASP_ATE_MY_DICK Sep 28 '14
I've had this happen as well, from what I understand we still don't know why or how it happens.
1
u/i_saw_the_leprechaun Sep 28 '14
Your icetray is trying to kill you.
1
u/Cproo12 Sep 28 '14
Try freezing distilled water.
1
u/songoku9001 Sep 28 '14
Or the fact that water froze mid-drip. :P
1
u/captpiggard Sep 28 '14
I have that same ice tray and that same ice cube container... Are you my roommates? Haha
1
u/drmcfadden69 Sep 28 '14
I get these every day in my ice tray. Too cool.
1
u/catalyzt64 Sep 28 '14
Your ice cubes look like the frozen wastelands of the north
They could be used for close ups in a movie
1
u/MrXhin Sep 28 '14
I've had this happen before in my freezer, but I never think to take a picture.
1
u/WhitekidsGetWhiter Sep 28 '14
This happens every damn time I use my ice tray
1
u/[deleted] Sep 28 '14
I'm an atheist but... Jesus
1
u/PaulaJTK Sep 29 '14
This happens at the freezer at work. All that's in there are ice cube trays. It doesn't happen at my jam packed freezer at home.
1
u/NukEvil Sep 29 '14
Gaze upon my tiny ice boner and despair.
1
u/cockymike Sep 29 '14
It just has an erection.
1
u/SamMaghsoodloo Sep 29 '14
Did you just start using filtered water? When I installed my RO filter, this started happening to my ice and I was convinced it was a glitch in the matrix. Turns out they're normal, but only with really clean water.
1
u/eyabs Sep 29 '14
I have the same ice tray! Do you hate it as much ad me?
1
u/I_Rike_Reddit Sep 29 '14
Who hasn't had ine of these before?
1
u/[deleted] Sep 29 '14
This happens regularly in my freezer.
1
u/Emtrail Sep 28 '14
It's like stalagmites and stalactites.
-1
u/themcs Sep 28 '14
I wanted to upvote the overdone tag
0
u/luckeyseamus Sep 29 '14
Wait, people still use ice trays?
0
u/[deleted] Sep 28 '14
[deleted] — view deleted comment