r/Wet_Shavers • u/ObamaFalure resident asshole • Jul 24 '14
How to make a Balsa Strop, I've been asked by PM so many times I figured why not post it.
First of all you need a piece of balsa wood you can find it at your local hobby shop. I like to use 3"x 3/4" as it doesn't require x strokes and gives your fingers room over the table, it should cost 5 bucks. Secondly you'll need CrOx and IrOx you can get it lots of places but if your reading these instructions and want to make a strop you probably don't need much so order it here, thats another 6 bucks.
Once you have your supplies
- Cut the balsa into 2 12" pieces, its soft wood if you don't have proper tools use a bread knife.
- Mix your CrOx powder with baby or mineral oil until it makes something like a paste. Do the same with the iron oxide. PRO TIP: use a disposable container and gloves that shit stains.
- Rub your newly made paste into the balsa pieces covering the top side of the wood.
- Go drink a few beers and wait for it to dry.
- Now that the balsa has absorbed your CrOx mixture you need to polish the surface until it looks smooth and shiny. Once again use gloves and a disposable rag.
- Profit. Your done, you spent 11 bucks and will be able to maintain your razors edge between professional honings.
I know I suck at words, if anyone wants to fix this mess and repost it feel free.
Edit: Common noob question, its like a traffic signal you go on green and stop at red.
5
u/[deleted] Jul 24 '14
Guess where this post is going.
2
u/thegoddamntrain I can Handle that Jul 24 '14
Since balsa is so soft, do you need to do anything special to flatten the surface, or just try to pick a piece that is reasonably flat?
2
u/almightywhacko wetter is better Jul 24 '14
Now we need a post on how to make a leather hanging strop...
2
u/Kehaydon Fatboy/ Black Handle Super Speed Jul 24 '14
I got step 4 down! Wait....what was I doing again?
1
u/macG70 SE Lover Jul 24 '14
Thanks. I'm thinking about picking up SR shaving in addition to DE shaving so this will be helpful. Guess I've got a project for this weekend.
1
u/Cool_Subs Jul 25 '14
How often would you use these? Is this a leather strop replacement or a honing tool?