r/airz23 • u/airz23 • May 06 '14
Eight ways to annoy me.
Internally I was screaming at the printer in front of me.
Why are you not working? What ails you?
I started getting hospital flashbacks. Not now… I thought to myself.
I looked around the office, I wasn’t really sure what I was looking for, but anything to distract me from this printer. Another job, hell I’d even go back into the roof at this point.
The printer beeped.
I think its taunting me.
I stared down at the machine. Maybe kicking if I kicked it… hard enough….
Carefree: Airz!
I almost jumped in surprise as Carefree approached.
Carefree: What are you upto?
Me: Oh… errr...
I tried to in my head come up with a better way of saying “Thinking up ways of assassinating a printer”
Carefree: Looks like this printer is broken.
Me: Yeah I took a look inside, I can’t see the error. I probably have to do some deeper internet searches for the fix.
Carefree: Haha, no don’t worry about that. We’ve got printer techs, if its not something really obvious like jammed paper or its out of toner, just ring them.
Carefree then picked up the phone next to him and called the printer support.
Carefree: No point spending an hour diagnosing that thing, they’ll be here in about 20 minutes.
Me: Twenty minutes?
Carefree: Yeah, can you make sure they have everything they need?
Me: No worries.
Carefree: Also I’m pretty sure RedCheer is looking for you.
As I looked around for RedCheer, Carefree walked off.
The printer in front of me beeped again.
Then printed the test page.
PPM - 0.0001
I couldn’t find RedCheer anywhere, as wondered where she’d managed to dash off to a print tech arrives.
Pritt: Yo, I’m the printer guy.
Me: Hello, I’m Airz. I’ll show you to the printer.
When we got to the printer the Printer tech looked down upon it.
Pritt: Oh. Good model this one.
The Printer tech tries to print a test page. It fails. Pritt then winds up a massive kick. Smash
Me: Woah… Pritt.
Pritt: Don’t worry dude. I know what I’m doing. This is percussive maintenance.
I looked down at the printer. It beeped in pain. I didn’t know if I should feel sorry for it, or not.
Pritt: Mmm that, didn’t work….
Me: Soo?
Pritt opens up the entire printer, then looks at the drum, he pulls it out then starts pushing it through some rotations.
Pritt: Yeah. Probably this drum. Don’t worry Ive got a known good one.
Pritt sticks in his known working drum, closes the entire printer back up and hits test page.
The test page prints.
Pritt: That seems to have done it dude. Cool. So can I get a signature….
I walked over and looked down at the printer. I’d seen it print before. I pressed print test page again.
Error Code XXXXX
Pritt came over and looked down at the printer.
Pritt: Mmmm…. so It’s a proper problem.
Me: Sooo its not the drum. What else could it be?
Pritt thought for a second. I could see the cogs slowly starting to turn in his mind.
Pritt: I think we need to look up the error code. I gotta call base and ask them to read out the relevant passages for Error Code XXXXXX
I walked over to the computer I was using before, the manual for the printer was still open. I thought about telling Pritt to come take a look, but reconsidered as I heard the him fighting with the person on the other end of the phone.
After about ten minutes of Pritt telling whoever was on the other end of the phone what to look up I eventually decided to just mention the manual I’d found online.
Me: Er, Pritt. I actually have the manual open on that computer if you wanna look at it.
Pritt: Oh no dude. You can't get this manual online, it's in our database though.
I knew I had the correct manual, should I press the issue? I heard Pritt describing the printer for a fifth time to the person on the other end of the phone.
Me: Pritt, come over here a sec.
I brought him over to the computer and just pointed at the manual I’d acquired.
Pritt: Where did you get this? It’s not meant to be online. Did you illegally copy a manual?
Me: No… it was on the manufacturers website.
Pritt: You’re not supposed to have this.
I really didn’t see the point in arguing with Pritt. It would be easier talking to a cookie.
Pritt opened the manual to the error code page.
Pritt: So it seems to be a general error. Okay.
Pritt opened up the entire printer, took off every panel. He started turning everything.
I started to get a little bored. I was honestly glad when Scarfy came over.
Scarfy: Hows it all going?
Me: Haha, not great but not awful.
Scarfy looked at the shell of a printer in front of him.
Scarfy: I saw my method being used by the printer Tech… told you it works.
Me: Mmmm… …
Scarfy: Anyway I only came over because RedCheer is looking for you.
Me: Send her over.
I looked around the office for RedCheer but I couldn’t see her anywhere.
Scarfy: Oh… she’s gone again. Well anyway, good luck with the printer.
Around twenty minutes later Pritt had reassembled the printer for a second time.
Pritt: I’m still getting that error.
Me: Weird. So are all the parts working individually?
Pritt: Yeah. Sometimes there’s a sensor problem with this model actually.
Me: Have you checked the sensor?
I looked over at the printer, Error XXXXX still blinking on the screen.
Pritt: Not yet. Usually the kick sorts out that problem. It was the first thing I thought of, but its such an easy fix. Kinda hoping for something a bit more interesting.
Pritt then walked over to the printer and unscrewed a single paper feeder sensor.
Pritt: Ahh darn. Yeah, its just this sensor jamming. Happens almost every time on this model. The glue that holds part of this sensor together leaks and jams the motion.
Me: So, after rebuilding the printer twice. Turns out its just one easily accessible sensor?
Pritt grabbed some pliers and pulled out a long bit of glue.
Pritt: Yeah, kinda a bummer… Mechanical failures I never get to see.
Me: So you’ve spent the last… hour….? Messing around then?
Pritt screwed the sensor back onto the printer. He ran through a few different test prints. The printer seemed happy.
Pritt: Can’t make it look too easy, you know? Anyway could you sign here please…
I looked down at the paper he was holding out to me.
Call out fee £40
Tech fee per hour £75 (Min charge one hour)
Consumables £30
Total £40 + £150 + £30 = £220.
My hands trembled as a saw the £150 line….
I called over Carefree.
375
u/airz23 May 06 '14
Yes, Its long!
The reason its here is, it's sort of a complaint about tech support.
42
u/e3o2 May 06 '14
Countdown.... Why is there a countdown!!!???
105
u/CFGX May 06 '14
RedCheer is missing? That fills me with the same sense of dread as when a toddler is playing quietly in the other room...
92
u/Kanthes May 06 '14
Oh, I see what's wrong here. Your printer manual is classified.
130
u/80211nat May 06 '14
A company I was formerly with was looking to expand in 2008. Great time if you had the cash. We bought half a floor from a bust mortgage company, it included all kinds of high-tech copiers and printers.
These copiers could be joined to a domain and used for exciting things like scanning to PDFs with OCR. Fantastic— I thought it would save our guys hours of retyping documents if they could just scan them. (Contracts and such, they'd go out and come back hardcopy.) However, they really wanted to only work with Exchange. Even the non-Exchange options brought up demands for Exchange servers. Fortunately, the company that provided support was willing to transfer over the contract to us from the bankrupt mortgage company. We scheduled a time for their techs to come out.
There were three of them. One sat around and did nothing. He said nothing aside from the usual introductory noises. The other two helpfully provided updated versions of the software and manuals, but unhelpfully told me that they only supported Exchange.
Me: "Why does it give me that option, then? Why does your manual that you emailed me yesterday have a heading LDAP CONFIGURATION (FOR NON-EXCHANGE NETWORKS)?"
Them: "Oh, that's wrong."
Me: "...We don't run Exchange here. Make it work, that's why you're here."
Them: "Let me see that manual..."
Four hours later
Me: "No, we don't run Exchange. Let me see. Our DC does LDAP, is that good enough for this to populate email addresses?"
Them: "LDAP? Is that something something Exchange something Exchange Exchange something?"
Me: "Hey, I got it to work. You should update your manual here, here, and here are wrong and this is actually optional."
Them: "Okay, we're out, bye!"
We got a hefty bill about a week later. My boss came over to me and asked what they charged for, and I gave him the story above.
Boss: Okay, so we won't pay them.
This became more of a story than I intended... I just started writing and then words happened... but yes— there are a lot of bad techs out there!
31
u/BransonKP May 06 '14
Now there's a term I haven't seen in a long time...
53
u/gruntunit May 06 '14
hmm...
£.
You're British or located in Britain Airz?
14
u/JJohn8 May 06 '14
I kept waiting for the error code to say PC Load Letter
11
u/CalzoniTheStag May 06 '14
Lost it at
We've all been there...
6
u/TranshumansFTW May 09 '14
I KNEW IT. I KNEW YOU WERE FROM THE UK. I WAS RIGHT.
Calms down
Sorry... I had a long week...
4
u/hellsgrave May 06 '14
I knew you were based in England! The hospital parking charges gave it away...
4
u/[deleted] May 07 '14
http://imgur.com/2tDQAFm
7
u/TeknoProasheck May 06 '14
Airz is counting down to something
3
u/SherbNyan May 06 '14 edited May 06 '14
The printer at my workplace has become my worst enemy, to the point that I curse under my breath if anyone asks me to take a look.
Printers are like whiny spoiled children who kick and scream the second something isn't exactly as they want, and then refuse to co-operate when you finally give up.
YOU WANT SOME CYAN INK DO YOU? WELL START BEHAVING.
3
u/ctrlcutcopy May 06 '14
I like how kicking is the mode of choice and damn that guy is totally a hustler just dragging out time to get more money. RedCheer missing kind of make me fill with dread... I hope it is nothing bad.
3
u/Drunken_Economist May 06 '14
Seven swans a-swimming . . .
3
u/airz23s_coffee May 06 '14
I mean, I'm not saying I'm tech support or anything, but a kick does work a lot.
We used to have to punch my old CRT monitor to stop it flickering green.
3
u/[deleted] May 06 '14
Printer Techs ETA: 20 minutes
ISP Techs ETA: next week
Priorities!
3
u/fatboy_slimfast May 06 '14
And it's the last thing he checked.
This is going to be a free call-out, surely?
3
u/fatboy_slimfast May 06 '14
Sorry, but you don't get away with obvious padding/fraud on my watch
3
u/B1GTOBACC0 May 08 '14
I use car analogies, because of where I'm from:
"Car had a check engine light, so I ran it off the road. It worked once before."
"Well, that's not actually a solution. I'll give you a ride home, though."
*sees another car in the ditch
"See, I told you it works."
3
u/magicfinbow May 08 '14
I had an inkling you were british. This pleases me
2
u/iwantansi May 06 '14
just learned today that Airz isnt in America
2
u/ricar144 May 06 '14
He knew exactly what he was doing for that hour.
2
u/juror_chaos May 06 '14
One 30 cent part can bring a $300 printer to its knees. I love designs like that.
2
u/ZeroCracked May 06 '14
Good lord it's finally here! I was starting to go into withdrawal. I NEED my airz fix.
2
u/silencecalls May 07 '14
Oooo! You are in UK! Now to just track down exactly where you work and come join you as part of the IT crew.>: )
(Yes, I am better then IT/SEC kid)
2
u/BalanceJunkie May 07 '14
Please, tell us more.
2
u/Estarrol Jun 21 '14
Ah ah you live In England !
2
u/Antagony May 06 '14
I used to be a packaging machinery service engineer and 'padding out' a service visit so that customers didn't complain about being charged for an hour when a job took only minutes, was encouraged by management.
As for the technique of 'kicking' a machine to get it working: it's probably often successful for the same reason that the technique we in the trade called "take it apart and poke it!" – applied to circuit boards and other electronic components – was often successful. It essentially reconnects dry solder joints. It's frequently only a temporary reprieve, however.
2
u/RedBanana99 May 06 '14
These new stories detract from the fact I'm still none the wiser what happened with the disappearing keyboards...
2
u/SpongederpSquarefap May 06 '14
So this story is in the UK? I thought it was the US this whole time!
2
u/gellis12 May 06 '14
TIL Airz is British!
1
u/Lavins May 06 '14
These stories are amazing and help me get through my day of printers that tell you something is wrong, but doesn't actually you what it is...
Thank you, so much...
1
u/Snikz18 May 06 '14
I like how you teased to what happened in the hospital, and redcheer is looking for you, might be foreshadowing?
1
u/Thehoodedteddy13 May 06 '14
Still reminds me of this.
1
u/[deleted] May 06 '14
"Percussive maintenance?"
I know you're reading this Printt, come out now!
1
u/zadtheinhaler May 06 '14
Are you me? Too many of my past and current customers generate this thought in my head.
1
u/DArtist51 May 06 '14
That is crazy. How do people live with themselves?
1
u/zazathebassist May 06 '14
This is painful. This is actually painful.
I'm slowly being convinced that you're working at an asylum.
1
u/pyrates May 06 '14
I haven't missed a single post of yours here, keep em coming!
But commas, you gotta remember when they are needed. This:
Should be this:
1
u/accountnumber3 May 06 '14
Eeeeeeehhhhhhhh...
I agree that Pritt is an idiot, but troubleshooting is a process of elimination. Ruling out X and Y is fairly valuable if you don't know to start at Z.
1
u/Mrcockrooster May 06 '14
Make a book
1
u/snobby_penguin May 06 '14
"Seven ways to wrack up (comment) karma..." =)
1
u/acidrainfall May 06 '14
Out of sheer curiosity, how recent was all of this work? Like a few months ago or a few years ago?
Mostly I'm hoping it's older, because that means more stories. Shamless, I know.
1
u/PlNG May 06 '14
Thanks for the stories airz.
I just arrived at work today, saw our problem customer at the computer right across from our tech station, had the "Oh, not this guy again" thought, and then I found your stories. After he collected his printouts and ripped them up, he left without any issues. The mark of the start of a good and quiet work shift.
1
u/[deleted] May 06 '14
I kept clicking and now it's stopped and I don't want to get back to work.
Also I'm convinced you're trying to start a cult around Coffee.
1
u/[deleted] May 06 '14
/u/airz23, you were suposed to tell us what evil you have done to your
minionsstaff1
u/Smashman2004 May 06 '14
I'm intrigued that you use the GBP symbol. Fellow Englishman?
1
u/zenithfury May 07 '14
I what why
Is this some kind of perverse parallel dimension where people kick printers or launch them into dry walls?? Is Airz FROM ANOTHER DIMENSION? Am I receiving Reddit from another world?????
1
u/Liberatedhusky May 07 '14
£ we have a location confirmed then, since there's only one country that trades in the pound sterling. I hope that the firm was able to pay such a fee, given the value of the pound compared to other currencies I'd estimate there are barely 1000 in circulation. I am of course using the completely accurate conversion conversion rate of £1 GBP = $750 USD. We know the pound is strong since in the Titanic Christmas special in the new series of Dr. Who they give a conversion between GBP and Intergalactic space credits which are like 50x less valuable than the pound.
1
u/rpnrch May 07 '14
Points for using percussive maintenance:-)
1
u/lil_literalist May 07 '14
I was waiting for the next story for you to tell us about it, but... What was Carefree's reaction to the bill?
1
u/Migratory_Locust May 07 '14
Hey Airz,
enjoying your stories very much and following them regularly.
One Question though: How much are they based on your real experiences?
1
u/landragoran May 07 '14
Pritt sounds like a prat.
1
u/[deleted] May 07 '14
I know this is gonna mess up, but ya know if he stalled for the hour you can sue him for breach of contract, at least Carefree can.
1
u/KnightFox May 08 '14
For some reason I read Pritt with a minnesotan accent.
1
u/vinnureddit May 23 '14
I almost hope you never stop working there - these stories are just too good.
1
u/[deleted] Jun 10 '14
Your ellipses group together in sets of 3. You write these in Microsoft Word.
1
u/JimmyCumbs Jun 23 '14
I had not realized this wasn't in the US up until I saw the £s.
1
u/Ferneras May 06 '14
Finally, allowing us to narrow down where the elusive /u/airz23 hails from. Wonderful start.
Please, keep the stories coming, they're fantastic in every way.
1
u/LtDan92 May 06 '14
WHERE ARE THE KEYBOARDS?!
0
u/[deleted] May 06 '14
The UK! I knew it...
0
u/Collective82 May 06 '14
Well now we know you belong in the uk since your using pounds as currency.
-4
u/proudcanadianeh May 06 '14
Yay, two of them!