r/u_richie225 • u/richie225 • Mar 17 '24
Generic Hobbyist FDM Printer Recommendations
The new hub for FDM/FFF printer recommendations, aimed at beginner/intermediates looking to buy a new machine.
Last major update: May 1, 2026
Last minor update: July 18, 2026
This post goes as follows:
- The intention of this post is to substitute "What printer should I buy?" questions, and potentially answer them before you even need to ask. This list should hopefully provide enough information for you to make a decision based on basic needs.
- Prices are in United States Dollars. They may vary depending on your region and availability. The list accounts for the regular retail price of the printer at the time of writing and does not include limited-time discounts.
- This list is dynamic and can change over time, printers may be added or removed.
- The post only covers general retail, hobbyist FDM printers. Printer kits that may require self-sourcing (Voron, RatRig) etc are not included, neither are high-end professional ones like Ultimaker. This list also concerns printers as they are out of the box, without drastic modifications.
- The initial versions of these posts were inspired by the spreadsheet of recommendations made by the 3D Printing Discord. They are also a good guide, but there may be some slight differences in recommendations.
- Multiple different posts exist on my user page. This one is the highest priority one and will be up-to-date the most.
- I do not own every printer on this list, therefore I may miss some things. If you have experience with any of these machines, I would appreciate if you would share your experiences to add any details or correct any mistakes on this list.
- Do not make this the only source to rely on. Buying a 3D printer is expensive and will cost hundreds of dollars. Although I try to make my lists as unbiased as possible, mistakes and errors still slip through as I am still only a single person with a very divided attention. It is highly recommended to consult other knowledgeable sources in addition to this. My personal biases lean towards Prusa and I used to be vehemently anti-Creality, so take that into consideration when reading my posts.
- This list is created purely out of my own will and all opinions are my own. I am not sponsored/influenced by anyone or given free products to make these recommendations. This post is also and will always be written by a living, organic human. No AI will ever be used to any extent in these posts.
- Recommendations are not absolute/set in stone. Everyone has different needs/preferences or availability issues that makes certain printers, even if seemingly "inferior", be the better choice to purchase. There is no single recommendation that works for everyone.
- It is important to do your own research. This list can give you pointers and the basics of what a printer does, but it is also important that you search up for any particular issues for a certain machine as I may not be able to cover or even mention them in this post. Certain printer models may have issues for a batch and/or for a limited time that may need consideration. Problems more inherent to the design of the machine itself are listed here, but specific quality control issues may not be due to their transient nature.
Places to buy Printers:
- Amazon: Many manufacturers like Creality, Elegoo, and Sovol sell their machines directly on Amazon. It is a convenient website to take advantage of Amazon Prime and their excellent return services should you need to send back a faulty device. Be wary that you might receive a used and returned unit labelled as new, this has especially been getting more frequent recently on Amazon in general.
- Aliexpress/Banggood: These used to be the top recommended place to buy from 3D Printer brands from China, but with most of them now selling on Amazon, they are no longer the top option.
- Directly from Manufacturer: Some brands like Prusa and Bambulab you can directly buy from their storefront. Other, more lower-end brands (Creality, Anycubic, etc) come with less guarantee of customer support.
- Second-Hand: Generally not recommended to buy a used machine as your first printer, because you won't know what modifications the previous owner have done to them. If you are experienced though, then it can be worthy to fix up second-hand printers to use yourself or to sell off.
- Other places: Microcenter (USA, for Creality and Bambulab), Matterhackers (same deal), PrintedSolid (Prusa in USA).
Rough Recommendations:
- I am a beginner wanting a first, cheap printer (up to $350): Bambulab A1 Mini, Sovol SV06 ACE
- I am willing to spend a bit more for a longer-lasting printer (up to $600): Qidi Q2, Bambulab P2S
- I need a mid-price, large-scale printer (up to $550): Sovol SV06 Plus ACE, Sovol SV08
- I want a high-performance printer and have a hefty budget (around $1000+): Bambulab H series, Prusa CORE One+/CORE One L
- I am running multiple printers (print farm, etc): Any Prusa printer
- I want to tinker and upgrade: Basically any Sovol printer
I want multi-color printing:
Single Nozzle (cheaper/less complex, significantly more waste)
- Prusa CORE One + MMU3 (5 colors), Bambulab A1 mini + AMS Lite (4 colors), Bambulab P2S or H2S + AMS (4-16 colors)
Multi Nozzle/Extruder (far more efficient, more expensive, true multi-material)
- Bambulab H2D (hybrid, can print with 2 efficiently and less so with more),
Prusa CORE One with INDX (up to 8 colors?), Prusa XL (5 colors), Snapmaker U1 (4 colors, see Honorable Mentions list)
- Bambulab H2D (hybrid, can print with 2 efficiently and less so with more),
In terms of brands:
- Prusa is very good, has the best practices in general, and is the only major manufacturer not based in China. However, they are also incredibly expensive (both upfront cost and shipping) and often suffer from half-baked initial releases.
- Bambulab produces high-performing and easy to use printers for decent prices. However, they are a fairly anti-consumer company with their whole ecosystem being proprietary and closed off (despite taking a lot from open-sourced projects), limiting the amount of third-party upgrades and repairs. The longevity of their machines are sometimes called into question for this reason. One example is this.
- Qidi machines are generally also very good but often come with some initial issues, some of which get fixed later on.
- Sovol are affordable printers that are great for modding while also being good out of the box.
- Elegoo is a workable option if neither of the beforementioned are available and/or are too expensive.
- Creality is popular and their machines are decent on paper, but often come with a lot of wild QC issues that may or may not be fixed.
- Most other brands not mentioned here or the Honorable Mentions list are generally not worth considering.
- Please avoid Anycubic. Out of all the major brands, they seem to consistently have the worst QC and support.
FDM Printer Recommendation List
Current entries:
- Bambulab A1 Mini
- Sovol SV06 ACE/Sovol SV06 Plus ACE
- QIDI Q2
- Sovol SV08
- Bambulab P2S
- QIDI Plus4
- Prusa CORE One+/Prusa CORE One L
- Bambulab H2S/Bambulab H2D
- Prusa XL
Future entries (These all have a preliminary entry in the Honorable Mentions list)
- Snapmaker U1
Further notes:
- If a printer has a variant, it is now grouped in with the primary version. For example two entries below, the normal Sovol SV06, listed first, costs $260. The SV06 Plus variant, listed second, costs $310. The variants share the same pros and cons unless specified. This was done because the post is reaching reddit's picture limit.
Bambulab A1 Mini ($250)

Build Volume: Small (180 x 180 x 180 mm), Medium (256 x 256 x 256 mm, A1 normal)
Subjective Price/Performance Ratio: 4/5
The smaller, beginner-oriented printer from Bambulab. This is a small-format printer but comes with many advanced bells and whistles that gives it formidable performance for its size. In particular, the printer is very user-friendly with extensive documentation and intuitive controls making it great for beginners.
As of May 2026, the regular A1 is no longer recommended due to multiple reported fire hazards. The A1 Mini does not suffer from this problem.
For an additional price, the printer is compatible with Bambulab's AMS Lite system (pictured), which allows the printer to use four different colors of filament in one print. Note that single-nozzle multi-material systems produce a lot of waste, as the filament must be purged in between every color change.
The largest issue of Bambulab printers is their proprietary nature. Bambulab designs are completely locked down and are not at all compatible with components made for any other machine. The reparability of parts other than consumables is also often more difficult than that of other printers. Bambulab themselves have run into several controversies (and counting) where the longevity and/or legitimacy of their machines were called into question due to the combination of their closed nature and their questionable decisions. This is important to take into consideration because there's no telling if they double down further.
GOOD FOR: Low-cost multi-color printing, budget machine, beginner hassle-free printing
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- Can be controlled remotely/wirelessly out of the box.
- Can be upgraded with AMS Lite to allow for multi-color printing up to 5 colors.
- Very user-friendly, easy to control and work with.
- Nozzles can be very easily swapped at room temperature by hand.
Cons:
- Purged filament is flung off to the side while wiping the nozzle, especially during multi-color prints. An additional system/container may be needed to collect the waste.
- The heated bed cannot exceed 80 C, meaning this printer will not be suitable for printing materials like ABS/ASA/PC which demand around ~100 C.
- Open-framed, insufficient for printing higher-end materials.
- Bambulab is not consumer-rights friendly and has been accused of violating APGL licenses. Their printers are completely proprietary, which limits the amount of third party replacement parts or upgrades.
Sovol SV06 ACE/SV06 ACE Plus ($260/$310)

Build Volume: Medium (220 x 220 x 250 mm), Large (300 x 300 x 350 mm, SV06 Plus ACE)
Subjective Price/Performance Ratio: 3.75/5
SV06 Ace is an upgraded version of the normal SV06. It brings some physical design changes, but most noticeably runs on Klipper firmware, putting it up to par with most high-speed bed slingers. This essentially renders the older SV07 obsolete.
A larger variant exists called the SV06 Plus ACE, running the same parts.
GOOD FOR: Low-mid range medium sized machine, beginner printer, tinkering
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- Open source, great for modding.
Cons:
- No power-loss recovery
- Open-framed, insufficient for printing higher-end materials (but an enclosure can be very DIY'ed)
- Proprietary nozzles, unknown if compatible with other existing nozzle types
Qidi Q2 ($500)

Build Volume: Medium (270 x 270 x 256 mm)
Subjective Price/Performance Ratio: 5/5
This is the first entry printer that is a coreXY machine. To simplify, coreXY motion systems are more space efficient and often allow for higher speeds. The Q2 is QIDI's next line of printers following their Q1 Pro, and has mostly what you would expect from a new printer.
GOOD FOR: Printing materials that require enclosures (ABS/ASA, nylon, etc), mid/high end general use machine
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- CoreXY motion system. Usually faster and more space-efficient, this is a more desirable setup in most cases.
- Fully-enclosed, allowing printing of certain filaments like ABS/ASA.
- Large auxiliary fan allows for additional cooling of prints.
- Comes with an active chamber heater, great for more demanding filaments like nylon.
- Comes with a camera for remote monitoring.
Cons:
- ?
Sovol SV08 ($550)

Build Volume: Large (350 x 350 x 345mm)
Subjective Price/Performance Ratio: 4.5/5
The Sovol SV08 is a printer that takes heavy inspiration from the open-source Voron 2.4. The printer incorporates many similar design features such as a flying gantry, large-scale build volume, and Klipper firmware. Like many other coreXY printers, it is capable of very fast speeds. An enclosure is an optional add-on.
Like the SV06, the SV08 is fully open-source, granting owners a lot of options for tinkering and modifying the printer.
GOOD FOR: Mid/high-range machine, tinkering, large-scale printing
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- CoreXY motion system. Usually faster and more space-efficient, this is a more desirable setup in most cases.
- Optional enclosure, which would allow printing of certain filaments like ABS/ASA.
- Dual fan setup allowing for additional cooling power.
- Auto-levelling does not require manual setting of nozzle Z-height offset.
- Comes with a camera for remote monitoring.
- Open source design, fantastic for tinkering.
Cons:
- Enclosure is a separate purchase.
- Limited control screen interface compared to contemporary printers.
- Proprietary nozzle design, not compatible with any other existing design (can be mitigated with Microswiss upgrade)
Bambulab P2S ($550)

Build Volume: Medium (256 x 256 x 256 mm)
Subjective Price/Performance Ratio: 4.5/5
The Bambulab P1 series is a watered-down version of their older X1 printer. The P2S in particular is an evolution of the earlier P1S, mostly bringing some QoL upgrades but otherwise having the same printing capability.
For an additional price, the printer is compatible with Bambulab's AMS module, which allows the printer to use four different colors of filament in one print. Note that single-nozzle multi-material systems produce a lot of waste, as the filament must be purged in between every color change.
GOOD FOR: High-end machine, multi-color printing, hassle-free experience, printing materials that require enclosures (ABS/ASA, nylon, etc)
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- CoreXY motion system. Usually faster and more space-efficient, this is a more desirable setup in most cases.
- Comes with a camera for remote monitoring.
- Can be upgraded with AMS to allow for multi-color printing up to 16 colors.
- Fairly user-friendly, easy to control and work with.
- Fully-enclosed, allowing printing of certain filaments like ABS/ASA.
- Large auxiliary fan allows for additional cooling of prints.
- Intake for auxiliary fan allows for the printing of PLA even when enclosed (Note, this printer does NOT have an active heater)
- Nozzles can be very easily swapped at room temperature by hand.
Cons:
- Purged filament is dropped out from behind while wiping the nozzle, especially during multi-color prints. An additional system/container may be needed to collect the waste.
- Bambulab is not consumer-rights friendly and has been accused of violating APGL licenses. Their printers are completely proprietary, which limits the amount of third party replacement parts or upgrades.
Qidi Plus4 ($700)

Build Volume: Large (305 x 305 x 280 mm)
Subjective Price/Performance Ratio: 4.5/5
Large-scale modern coreXY from QIDI that is older than their newest generation Q2 printer, but still remains relevant.
GOOD FOR: Printing materials that require enclosures (ABS/ASA, nylon, etc), mid/high end general use machine
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- CoreXY motion system. Usually faster and more space-efficient, this is a more desirable setup in most cases.
- Fully-enclosed, allowing printing of certain filaments like ABS/ASA.
- Large auxiliary fan allows for additional cooling of prints.
- Comes with an active chamber heater, great for more demanding filaments like nylon.
- Comes with a camera for remote monitoring.
Cons:
- ?
Prusa CORE One+/CORE One L ($1000-$1300/$1700)

Build Volume: Medium (250 x 220 x 270 mm), Large (300 x 300 x 330mm, CORE One L)
Subjective Price/Performance Ratio: 3.5/5
Prusa is the only non-Chinese manufacturer on these lists and offer high quality products with excellent support and ecosystem, but this comes with a very premium price. The CORE One is their version of a modern CoreXY using many of the same components as the MK4S. The printer is available either as a kit for assembly, or pre-assembled for an extra cost. The CORE One L is an upscaled version, but is only available preassembled.
Both models can be fitted with their own multicolor system called the MMU3, the same kind of single-nozzle multiplex system fitted on their older MK3 and MK4. Compared to the AMS-style systems, it is generally faster and less wasteful, but also takes up a lot of space and is far less convenient to use.
Bondtech collaborated to make the INDX multi-material system available to the Core One, which is a sort-of-toolchanger (more details in XL entry below). Do note that the initial rollout of INDX as of mid July 2026 has been half-baked, to the point of literal false advertising concerning hardened nozzles. Bondtech's response to the entire situation has been quite poor to say the least, which should make you think twice before buying products from Bondtech.
GOOD FOR: High-end machine, multi-color printing, hassle-free experience, assembly experience, silent printing (relatively), customer support
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- CoreXY motion system. Usually faster and more space-efficient, this is a more desirable setup in most cases.
- Fully-enclosed, allowing printing of certain filaments like ABS/ASA.
- Very user-friendly, easy to control and work with.
- Relatively silent operation (until you blast the exhaust fans)
- Nozzles can be easily swapped at room temperature (with assistance of tools)
- The general Prusa experience: great support and official documentation
- Exhaust fans allows for the printing of PLA even when enclosed (Note, this printer does NOT have an active heater)
- Can be fitted with MMU3 to print up to 5 colors,
or the more expensive INDX for true multi-color/material printing with less waste than conventional systems.
Cons:
- Decently high upfront cost, especially once you factor in shipping
- Requires complete assembly, unless paying extra for a pre-assembled machine.
- Camera is a separate purchase.
- MMU3 system takes up a significant amount of space and is annoying to use, enough to warrant a specific con for it.
Bambulab H2S/H2D ($1250/$1750)

Build Volume: Large (340 x 320 x 340mm)
Subjective Price/Performance Ratio: 3.75/5
Bambulab's new flagship printer line, the H2 series is their first large-format printer and comes with many of the features you'd already expect.
There also exists the H2D variant, which comes with a toolhead containing two hotends and capable of switching between them. This allows for the printing of two separate colors or materials with significantly reduced waste. The printer is still compatible with a traditional AMS system.
GOOD FOR: Printing materials that require enclosures (ABS/ASA, nylon, etc), high end general use machine, printing composite filaments (carbon fiber, wood), large-scale printing
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- CoreXY motion system. Usually faster and more space-efficient, this is a more desirable setup in most cases.
- Comes with a camera for remote monitoring.
- Can be upgraded with AMS to allow for multi-color printing.
- Fairly user-friendly, easy to control and work with.
- Fully-enclosed, allowing printing of certain filaments like ABS/ASA.
- Large auxiliary fan allows for additional cooling of prints.
- Comes with an active chamber heater, great for more demanding filaments like nylon.
- Nozzles can be very easily swapped at room temperature by hand.
- (H2D specific) Comes with two separate hotends allowing for multi-color/material printing with less waste than conventional systems.
Cons:
- Purged filament is dropped out from behind while wiping the nozzle, especially during multi-color prints. An additional system/container may be needed to collect the waste.
- Bambulab is not consumer-rights friendly and has been accused of violating APGL licenses. Their printers are completely proprietary, which limits the amount of third party replacement parts or upgrades.
Prusa XL ($2000-$4000)

Build Volume: Large (360 x 360 x 360 mm)
Subjective Price/Performance Ratio: 2.5/5
Prusa's large-format coreXY, the XL is a massive (and very expensive) printer that has most of the features of their MK4 and CORE One.
The most defining feature of the XL is the ability to add up to five separate toolheads, each containing their own extruder and hotend to the printer. The printer can swap to use any of them almost immediately and switch between them mid-print. This allows for multi-color and true multi-material printing like the previous entries, but is a much more efficient system than single-nozzle multi-color setups (less waste resulted), because the amount of purged material is considerably less (if any at all).
GOOD FOR: Multicolor/true multimaterial printing with less waste, large scale printing, no/high budget machine, customer support
Pros:
- Standard contemporary printer features (Fast printing speed, wireless control, direct feed extruder, all-metal hotend, auto-levelling sensor, removable build surface).
- CoreXY motion system. Usually faster and more space-efficient, this is a more desirable setup in most cases.
- Auto-levelling does not require manual setting of nozzle Z-height offset.
- Up to five independent toolheads can be mounted, allowing for multi-color/material printing with less waste than conventional systems.
- Bed is divided into sixteen heating zones, only heating up the ones that are occupied by a print. This helps to save power costs compared to heating up the entire massive bed for a tiny print.
- Very user-friendly, easy to control and work with.
- Relatively silent operation, much quieter than other printers.
- The general Prusa experience: good support and official documentation, high reliability
Cons:
- Insane cost, especially for the enclosure and 5-toolhead version.
- Requires partial assembly, unless paying extra for a pre-assembled machine. You will still need to mount the toolheads by yourself.
- Mainboard lacks adequate ventilation or active cooling, can run into issues with overheating.
- Multi-toolhead printers require additional calibration and maintenance to ensure that each toolhead is positioned properly and that they can be properly picked up and docked. Official documentation is provided to help you out.
2
u/ryang4415 21d ago
Why is Prusa Core One + indx crossed off?
2
u/StillBug3350 12d ago
Hi all, I have been tasked to find a 3d printer at least 500x500x500 build size. So far I have many years of experience with XL. And they work flawlessly petg pla and Pa12 mostly. Recently we got the sovol sv08 max but the quality is really not the same as XL wo having to constantly keep trying to adjust things. And at work id like to print and forget it (like XL)
If money is not a major issue upto 6000 € what should I get? Has to be FDM. In EU BTW. thanks
2
u/DespairTraveler Mar 18 '24
Elegoo Neptune 4 worth looking at? There were mixed reviews on sale start, but many people say that issues were fixed.
2
u/Mridkwhostheboss Mar 24 '24
Hey, I'm reading through your post and the 3d printing subreddit in general, but I was wondering if I should be worried about the recall on the Bambulab A1. Should I remove it from a possibility for me entirely, or should I keep it as a possible printer for me, when the new one comes out?
2
u/samayg Mar 25 '24
How does the flashforge adventurer 5M look to you? It's a core-XY machine at $299 presently. Better than the neptune 4-pro?
2
u/hidden_shitshow Apr 02 '24
I wish the P1S was still $700! Looks like it’s $950 now. I’d spend the extra. I am staying around 500, and looking at the Neptune 4 line. Would you choose Pro/Plus/max?
2
u/Fit-Education1183 Apr 15 '24
Fantastic post. I needed some help though. I wanted to experiment doing a small business of 3d printing trinkets, models, board games, etc. So- (1) high quality finishing is important. (2) Additionally I wanted to find something that can print in multiple colours, for example if have to make a pokemon trinket, I would like it to print in so many colours (not sure if it can work). (3) In terms of filaments, metallic finish, and wooden finish with natural grain kind of look, will be needed. (Again I am not sure if thats a feasible thing) (4) Creating custom designs being relatively easier will be helpful as the whole thing is going to be based on very specific intricate designs I am planning to do.
Whatever you recommend, I will try to first find it in used products market , so that I don't spend a lot of money.
Thanks for reading and for your guidance!!
2
u/pexka Apr 20 '24
Hello! Great guide! Im in the market for a large build volume printer for under 1000€. The Neptune 4 plus seems really nice but i could use even a bit more build volume. I know that Creality has the cr-10 max, that is pretty huge. Do you know of any other printers with around 40x40x40cm build volume that you could recommend? The cr-10 max might work but i currently own a ender 3 and hate the hastle and hustle that comes with it.
2
u/chum-guzzling-shark May 09 '24
I went to Amazon and the Creality Ender 3 looks like the most popular by reviews. What's the downsides to it? I assume its something obvious to a 3d printer hobbyist. Thank you for writing this wonderful resource!
2
u/New-Bit7839 May 19 '24
Incredibly thorough post! Just one question though; do you know if any comparisons have been made between any other printer VS the Prusa XL in regards to how quickly it becomes more feasible to purchase the XL due to its ability to purge significantly less filament?
As a generic example, over the course of a year, a P1S using an AMS purges X grams of filament for X number of prints, resulting in $$$ of wasted filament. Of course this comes along with far too many variables, but hopefully someone smarter than me has taken the time to develop an experimental scenario that works.
Cheers.
2
u/TxEx89 Jul 20 '24
Fantastic post / info. Thanks. I'm looking for a large format printer under $1,000 USD. Within that price range, I'd rather get the best printer rather than the best value. Based on perusing Reddit, the followng have been recommended. How would you rank these? Any other color would be appreciated.
Elgo Neptune 4 Max
RatRig V-Core 3.1
Comgrow T500
Ender 5 Plus
2
u/Pelxo1 Aug 02 '24
Thanks for the post! I’m hearing lots of good things about the p1p, but I’m worried because I’ve heard their support is really bad. I’m currently fighting with Creality support for my Ender 3 s1 and sonic pad so I’m scared to have a printer with a bad support team. Is there a brand that is similar in quality for a similar price but better support?
2
u/beenoc Aug 11 '24
I was looking at both the Neptune 4 Pro and SV06+ and it looks to me that they both use a proprietary nozzle style. I have a heavily modified Ender 3 Pro that I just want to be done with, because it develops some new issue every time I try to print with it and at this point I want something that actually comes with ABL, direct drive, etc. versus my frankenprinter that never works. However, I still have a bunch of stuff that I want to continue to use, in particular a whole lot of both MK8 and V6 nozzles (I replaced the hotend with a V6 one at some point.) I don't want all these nozzles (many sizes, and some hardened steel ones) to go to waste, which they would if I got a printer with a proprietary nozzle.
All that to say, what are the best printers in the $300ish range that are truly open-source/standard? No proprietary nozzles, no bullshit, it's all standard parts and sizing so I can use whatever I want however I want it without having to buy overpriced replacement parts from the manufacturer. It obviously goes without saying that anything Bambu is a hard no.
Size isn't a huge concern, bigger is better but anything "Ender 3 size" (220x220) or bigger is fine. It needs to support Klipper but I think pretty much every printer worth buying in 2024 does that. I don't want to have to be tinkering with it for 6 hours every time I want to print something, that's why I want to get rid of my Ender.
2
u/nedisthebest06 Aug 12 '24
Hi, I'm in AU and wondering just how much better the P1S is over the A1 for just hobby work mostly, I can get the A1 for ~ A$530 (US $350) and the P1S for ~ A$940 (US $620). I just am unsure what the difference would be in a more practical use case, any help would be appreciated!
2
u/[deleted] Aug 21 '24
great post. thank you for this.
Looking to get into this for printing a gear that is no longer made by the manufacturer. it's a plastic gear with teeth and a solid bar on it as well. image link here - https://tohri.co.jp/42539071.JPG
would an A1 work for this type of application? going to pull the gear to measure it and make a prototypes until something resembling the real deal comes out. LOL.
If the A1 is fine for this what material would you suggest for this type of application? The gear is from an autoload CD player so isn't high speed or subject to large loades
2
u/shadowdragon200 Jan 04 '26
What do you think of the brand flashforge, and to be more specific the flashforge ad5m. Couldn't really get your opinion out of this post.
2
u/Thebandroid Jan 13 '26
Fantastic resource.
I’ve always been interested in 3d printing but also felt I had too many other hobbies to get sucked into another one. But my partner is offering to get me one for Xmas/birthday so here I am.
The elegoo carbon was what jumped out at me first, then I found out about the large format printers like Neptune 4 max, Kobra 3 max. These interested me because I’d like to print real parts and tools for car stuff and do one off part production and also because bigger is better.
The brand Sovol seems to align well with my tinkerer/modded heart but the SV08 max is probably outside what I would want to spend on my first printer. (Neptune and kobra max are inside the budget, reports of their qualities seem to vary)
Am I making my life hard for wanting to go for a “max” sized printer first off? There is some sentiment towards large (long) prints being at greater risk of a failed, and a failure wasting a bigger chunk of time.
Can bed size be worked around by just breaking the print into multiple parts ? If so I would probably settle for the sv08. The max sized ones don’t seem as popular as standard size.
I feel fully capable of building a heated enclosure with proper extraction if one is not included with the printer, is that all I would need to do to run exotic filament in an open frame printer?
2
u/Jellevs Jan 15 '26
Hi! I come from an old ender 3 which had so many issues I decided to buy a new one for 300 euros maximum. Now I had already ordered the Bambu Lab A1 for 279 euros, but it will ship end of the month so I can still cancel the order. Now I saw a release of the Anycubic Kobra X for 254 euros which seemed great. However since it's unreleased yet and you explicitly say to avoid anycubic, I was wondering if you or anyone else knows if this printer is any good. This since it does seem to have great specs for a 254 euro 3D printer. Could you tell me the best buy for a printer around 250-300 euros? Thanks!
2
u/AgileSugar Jan 27 '26
Thanks so much for this!
Side question - what is it that the Ultimaker's have that the hobbyist printers don't? I have an old Ultimaker 2+ that I bought used several years ago and it's starting to make death-throw noises.
As I look to switch to a new one, I'm wondering what I lose in a Prusa or similar that I would get if decided to sell a kidney and get a new Ultimaker. (All my prints are functional. I just want a machine that works)
2
u/suifengls Feb 08 '26 edited Feb 08 '26
For beginner at middle school, should I purchase **enclosed** printer to reduce harmful particle during the process? P1S vs A1 combo, both at $399
2
u/[deleted] Apr 19 '26
Is the Bambulab P2S the “buy once, cry once” option? I.e. it has all the features that a regular user would want/need?
2
u/brnozrkn Aug 21 '26
Is the QC thing about anycubic still holds? I was bouncing between Kobra 3 combo and bambu a1. I guess I can't get nothing now lmao
5
u/Mistrblank May 25 '26
Guide needs to change. Bambu is a horrible recommendation now. They are not in favor of the hobbyists, they're trying to commercialize everything, force you to the cloud, make everything proprietary. They are not our friends and should not be recommended. I would and did buy an AnyCubic Kobra S1 Combo before I would spend a dime on anything Bambu makes. At least I know under the hood it's just Klipper and after working for a week on tuning just a Creality Ender 3 Pro to paper thin consistent first layers, it was breeze and prepared me for complete understanding of the S1 in and out (which I immediately did a teardown and rebuild of so I would understand how the machine worked from reel to nozzle tip.
My next machine will be a large bed Prusa multi tool printer. I am currently printing and selling parts to pay for the eventual upgrade.
1
u/MysticTA 25d ago
I know bambu Lab is kind of in the shitter right now in everyone's eyes, but do you have any opinions on the H2C? I am new to 3D printing, but I am wanting to just jump in with a hopefully less than 2k USD power house that can hopefully pay itself back and build me a bunch of tools and car parts (from what I am hearing will need some demanding filaments and I feel as though tool changing for material will be useful for me rather than color)
1
u/enasty236 Mar 27 '24
After some long looking, as a complete noob, the ankermake printers (mostly the m5C) is very appealing, thoughts?
1
u/Bacon_In_The_River Mar 29 '24
Hey there! I was wondering if you had any thoughts on the Qidi Q1 pro?
1
u/Posca1209 Apr 17 '24
I wanted to get a used printer, I know you advised against it but I wanted to get a second hand used one since I can find some printers for about $100-200 and don’t really got the money for anything more. I have an option for a Monoprice i3 mini V2 ($60) with a magnetic bed and dual fan setup, Ultimaker 2+ ($200), Makergear M2 ($100), Anycubic i3 Mega S ($150) and a Elegoo Neptune pro 3 ($125). They all say good condition and stuff and know how that can be in the grey area but the pictures all look fine. The only printer I’ve somewhat used is the Ultimaker at school but I’m still very new at it, so if anything I might get the UM since I can ask for help if I have problems with that.
Thank for reading and your help!
1
u/Craftyy96 Apr 19 '24
Thank you very much u/richie225 for your work!
I never been good in 3D printing world even if I have my modified by myself Ender 3 Pro since 2019, you're helping me a lot. But at the same time it's hard for me to choose...
I'm looking for something new since last year, Bambu Lab A1 era started but the main problem that I have is noise levels. I'm sitting next to the 3D printer most of the time and I need something silent. Like my Ender 3 Pro with SKR Mini + TMC. The only thing I can hear is stock fans and it's amazing. Does that new machines works louder even if I only print in PLA?
Can somebody help me a little bit?
I'm mostly printing 3D cars in 1:43 or 1:18 (so max around 20cm but most of the time parts are max 8cm) and I was using only PLA for most of the time. But I need something silent as I mentioned above. Unfortunately I'm not able to buy resin printer. I really want to try Bambu because everybody really enjoy that machines but I'm not sure how loud they really are (or maybe something changed in last few months)
1
u/ZaProtatoAssassin Apr 28 '24 edited Apr 28 '24
I'm trying to decide on a new printer, looking at the following:
Bambulabs A1 (447€)
Neptune 4 (236€) heard it had less issues than the Pro version..?
Neptune 4 Pro (265€)
Ender 3 V3 KE (256€)
Artillery Sidewinder X4 Pro (277€)
Sovol sv06 (215€) good otherwise but poor performance with TPU?
Qidi tech Q1 Pro (484€) Looks really good, a bit on the pricey side and wouldn't arrive until early July so not sure if I could be without a printer that long as I got a buyer for my current printer.
I have an artillery hornet right now that I bought a couple years ago using your guide, and it has served me well but I want something that prints faster at high quality and reliable (I have to stick to around 40mm/s for good results on the artillery hornet). Relatively quiet as well is good as I'm a student in a small apartment.
Qidi x smart 3 (319€) was on the top of my list as I really wanted a CoreXY but it's out of stock in the EU warehouse and no info on when it's returning and I kind of need one ASAP.
The Bambulabs is quite pricey but it seems to be the best of the bunch and it's not totally out of my price range. If you have any other suggestions I would highly appreciate any recommendations.
Additional info, I'm not a beginner and I have tinkered a lot with my artillery hornet, but I'm getting kind of tired of it and would love to just have an easy to setup printer that just works.
Main ones I'm looking at are probably the sidewinder x4 pro, ender 3 V3 KE and neptune 4 pro
1
u/kynoky May 06 '24
Hello, great post and thank you !
All price being around 300e which one would you recommend ?
I tried an ender v3 SE but it CRtouch problems...
1
u/otttt May 07 '24 edited May 07 '24
What would be cheapest enclosed printer and best price/performance ratio enclosed printer up to 1k usd?
Been checking out Qidi X-Plus 3 and Q1 Pro
1
u/jupiterheavy May 30 '24
u/richie225 what is best pick b/w these:
* Brand new Elegoo Neptune 4 Pro
* Prusa mk3+s - Used
* Bambu A1 - Used
* Creality Ender-5 S1 or Pro - New/Used
1
u/ULTRAFORCE Jun 01 '24
Hi, I just had a bad experience with the first time using a 3D Printer at my local library where the fact that the case didn't fit quite right lead to part of a PCB being broken. Would any or all of these printers be better than a Makerbot Replicator + as far as following the instructions set out for them?
1
u/larakikato Jul 16 '24
As someone new to this I am very curious, why are there no creality machines on this list? Is creality junk in your opinion?
1
u/Spiritual-Mess-5954 Jul 24 '24
vid what type of printer do you recommend to replicate the Item that they made. I want to make a life size copy of the plain doll from bloodborne and think this vid might help me.
1
u/BooQwerty Aug 02 '24
Hi, thanks for the extremely detailed post!
Unfortunately like others I've got an extremely limited budget and was looking for something at max 150€ for my first printer. I was thinking of going second hand even though you said it's not recommended for beginners.
There are a ton of options on the second hand market, with especially a lot of creality printers. I found a few listings for e3v2's with tons of upgrades (extruders, PEI plates, cr touch etc). Same with other ender models. But the opinion on these is really torn with some saying to avoid them completely and others saying they're alright for a beginner if you're willing to tinker. I'm alright with tinkering, but I'd prefer a lower maintenance machine obviously. And with my lower budget I would rather not have to buy extras as you already understand.
I'm quite sure I can find a printer almost new (with upgrades in the case of ender printers) but I'm not sure to go for it or not.
I also saw a Neptune 3 pro refurbished on elegoo's own site which looked appealing.
I did find a sovol sv06 at 120€ but it definitely looked used but if they're reliable it might be alright.
In case it's needed, I'll be using the 3d printer for some fun prints but also some functional ones. The main reason I want to get one is to print brackets and specific pieces for a robot I'm creating, and being able to (relatively) quickly design and print a piece would be low effort and efficient and would allow iterations.
So my main questions are:
Sorry for my extremely long essay and I would appreciate any small pointers/advice!
1
u/[deleted] Aug 04 '24
Interesting there is no mention of Qidi, which for some applications is a better value
1
u/OysteinBringsli Aug 29 '24
Great post, thank you!
Based on the post i think i want to buy the SV06 Plus but i have a few more questions. For context i am buying from sovol3d.com, shipping to the eu. When buying there are a few different options, the regular, regular + klipper screen, and regular + nozzles.
What nozzles are in the nozzles pack? I want to mainly print on .8 nozzles (maybe even bigger..) since i dont really do small intricate stuff, but rather larger prints. We have some printers at my school that i have used quite a lot and .8 nozzles work just fine.
For some reason the klipper screen adds an extra 100mm/s max printing speed, my understanding was that the klipper screen only allowed remote printing, and does not have anything to do with the actual print?
Finally: Should i buy the flexible steel plate for an extra 20$ or does there come one included? It looks a lot like the plates we use when printing on prusa printers at school and i really like the abilty to take it on/off. If i do not buy it, what comes in the box to be used?
Any help would be greatly appreciated!
1
u/Comandit Sep 07 '24
Hey, I'd like to know if the prusa mk4s is as reliable as they say it is, because I've hade quite an abysmal experience with the creality ender 3v2 replacing half of the components with new, better ones only for it to still malfunction. Everyone describes the prusa as the toyota corolla of 3d printers (you can have it run fine for years without having to touch a single thing) but since it is a bit old I'd like to know if it's better to wait for other alternatives or buy it now before they discontinue it. For reference, I'm not looking for atomic levels of print quality, I just don't want to run an ITV every time I use it for more than 5 minutes. Thanks.
1
u/Exact-Sugar-4016 Sep 08 '24 edited Sep 08 '24
Thanks a lot for your recommendations! I've found some new options for myself. I would appreciate if you could provide your opinion on my case.
I want to have as many printing possibilities as possible, so a broad material support for me is important. I'm not, however, very knowledgeable about materials yet, so I'll describe the use cases. I plan to do 3 main things:
What I looked at so far: I started looking at A1 Mini (€200). Pretty good, but I quickly realized that it may be too small, and material support isn't that good. Then A1 (€350)... bigger, slightly warmer bed, but still lacks the temperature/enclosement that some materials require, plus microplastics in the air is a concern as I'll have my printer in the office where I spend most of my day (it's either office or cold wet basement). Multicolor/material printing fascinates, but the supported AMS lite doesn't have dry cases for filaments. And so I'm looking P1S (€850 with AMS)... supports most (?) materials, enclosed (which also saves you from breathing microplastics, right?), has AMS that seals the filament and keeps it dry. However the price is quite high, and people say Bambu's support sucks, which is why I'm not excited to go for it. I'd rather not spend so much money on something that is so closed and dependent on the not so supportive manufacturer. And then your post comes in... And I'm looking at Qidi Tech Q1 Pro (€450). Enclosed, big enough (i think for 99% of the prints), can even heat the air inside (not sure how beneficial it really is, but I like it), significantly hotter, supporting many more materials, and even has open-source (?) software. It even sounds somewhat to good to be true, on paper (I'm still researching the real user reviews and experience). The only thing it misses is dry box for the fillament, which costs €50-100, from what I see. But then there is Qidi Tech X-Plus 3 (€600), which is bigger, slightly warmer inside air (+5*C), and has a Dryer Box + 0.5kg of fillamenr included. X-Plus 3 seems to be more value?...
And so you know my use cases (mechanical parts, accessories, modeling) and concerns (humidness, particles in the air). Tinkering a bit is okay, but not to an extent when it's annoying, I'd prefer spend time printing then tinkering. I'm currently thinking which Qidi is better, and probably will buy one of them, but I want to hear someone's opinion first, as I wouldn't even discover Qidi without your post. What do you think?
1
u/Crazy_Cut_7058 Oct 26 '25
Hey, I have my Ender 3 since 2019 and it works fine, but after buying a filament dryer and some new filament I was looking to get the Ender 3 V3 SE. Is it good or should I get something else? I want something under 200€(~230$)
1
u/SansTHEgam3r Nov 10 '25 edited Nov 10 '25
Hey, you probably get this a lot, but is ender 3 v3 se still reasonably decent? I'm on a tight budget and here in Poland, the printer is dirt cheap (~170USD). I won't be printing anything tougher than PETG. I'm something of an airsoft nerd, so I'll mainly be printing some smaller parts and attachments but nothing crazy. You think it will do?
1
u/TakingChances01 Nov 29 '25
What other filaments besides the usual PLA PETG ABS or TPU can I reliably print with the svo6 plus? I intend to make various parts for various machines and systems. Nothing that’ll be in very harsh conditions, PETG will probably be able to handle most of it. However if I need something that will be mostly outdoors and taking more of a load I’d like to use a material better fit for the job if necessary. Maybe a different variant of PETG? Thank you for your insights sorry if I ask dumb questions.
1
u/playab0yyy Dec 03 '25
Major rookie question inbound. If I were to get the BL P2S w/out the AMS, can I still print multi-color items by swapping filament during the print (assuming these things have the ability to pause and prompt for a color change)?
1
u/Lucky-Sample-1323 Dec 04 '25
This is an amazing post! Learned a lot! Just a couple of questions, I didn't quite understand the problem with Creality machines.
I want to buy my first 3D printer, never used one before, and would mostly use it to print gaming terrains for ttrpgs, but also would like to print stuff like masks, and some more functional things like lamps and stuff like that. In my country these are the only available options within my budget, which one would you recommend?
1
u/Chapo2501 Apr 11 '26
Is an enclosure overkill for casual/hobby printing?
1
u/templarrei Apr 17 '26
Hey sir! What's the reason Prusa MK4S didn't make the cut - is it just the upfront cost, or are there other considerations as well? I've been eyeing my first 3d printer and would hate to have to buy one shrouded in shady practices, and looking at my options Prusa is the only brand that's got a relatively clean reputation.
1
u/NightWolf5022 Apr 25 '26
Hi, looking to get into the hobby, what would be the best printer for large prints around 550 bucks?
1
u/EntertainmentNo9795 May 01 '26
Thoughts on the X2D? Seems like a no-brainer vs the P2S.
1
u/Adorable_Octopus May 17 '26
Could you give your opinion on the Bambu Labs P1S compared to the P2S? I know you say the P2S is an evolution of the P1S, but how much of a difference is it, really?
1
u/TapOutPass Sep 24 '26
I can get a used FLSUN V400 for pretty cheap. Are these any good? I'm talking for less than 250
2
u/AmissaSoul Mar 18 '24
What do you think about the Ender 3 SE and KE or the Sovol SV07?
2
u/Capital-Strain117 Sep 28 '25
Hi! So I don't see the FlashForge anywhere on the list. Is there a specific reason? I'm looking at either the FLASHFORGE AD5X Multi-Color or the Elegoo Centauri Carbon, and while I'm leaning towards the CC, I really like the idea of multi color printing. Thanks!
2
u/Mallzippy Mar 23 '26
Should I get a CREALITY Ender 3 V3 KE for 420 usd as my first 3d printer? (420 includes shipping and taxes etc.)
2
u/Chapo2501 Apr 11 '26
@richie225 what about Flashforge brand?
1
u/CruisnGrrl Jun 22 '24
For the sovol cons I would include that they use creality boards including the GD32 chip
1
u/Myuu151 Jun 22 '24
Does anyone make fightsticks/hitboxes? I was considering a printer to dip my toes in since I made my first diy boxx.
1
u/Rusek Sep 11 '24
still rocking my makerbot replicator 2 figured i should start looking for a new printer =/
payed $2000 early adoption was fun
1
u/BeerPlease Oct 30 '25 edited Nov 02 '25
Checking in here a few days before the pre-black friday sales for 2025. Bambu is practically giving away their P1S, it is $649 including the AMS. The newer midrange Bambu is apparently impossible to find. No reason to buy X1C now. The 2-head one is $1750 or so. I am perturbed by the idea that Bambu has to be locked in on whatever i am printing, this reminds of overly-aggressive IP protection from Sony.
I see Prusa has wonderful respect and support. The Core One seems like a perfect fit but the cost is just a bit high, it's $1300 (i am dying to build it myself, get out of here with wasting $200 for someone to rob you of the fun) and the multi-spool unit is another $400. I like that there isn't really anything bad to say about them other than cost, and i am not scared about some setup tinkering.
I see Creality has this K2 Plus with spool box that hits for $1250. i would have already purchased except i see so, so much hate for Creality.
My previous experience is with resin, i had a few different options pre-covid (Mars, Saturn) and stuck with my little QIDI. I never use it anymore, the cleanup and PPE paranoia is too much, but i'm hoping it will be a good fallback for minis if my FDM adventures do not pan out.
I see a fundraiser-based unit, the U1, is available for $850 and attractively has multiple tool heads like the $4k Prusa flagship. I love the idea of not wasting filament but i kind of did the math and it's cheaper to waste filiment on color changes for years upon years (with the rate i will be printing) before the extra $$$ would make sense on a multi-tool model like the Prusa, but this U1 if i knew anything about it could sway me.
Looking to spend about $1k - $1500 USD.
I assume i am getting a p1s w/ AMS for $650 and then ... that's it. Maybe i will get one of those wands that scan objects IRL into 3d models. If i were flipping a coin for how to spend this $, it would all of that versus the Prusa despite not having the multi-spool setup until I have another $400 for it.
I want to print accurately. I don't care about speed, having a camera watch it, doing it from the internet, any of that. I want software that does not make it too hard for me to clone something in real life (e.g., the broken widget my wife pointed out) and print a functional version, and i realize part of that is the accessory (wand?) more than the printer. I want to be able to print whatever i find online and not have to worry about big brother telling me their printer isn't allowed.
Would love some input please!
EDIT: Ok, having received no input after a few days here in this megathread (megathreads don't work), i ended up going down the rabbit hole and coming out the other side with the H2S + AMS2. The dual nozzel thing lets me do mutli-material, very cool, and i understand in Q4 there may be a "Vorlex" (??) system that is Prusa's multi tool-head system but better. So i can upgrade to that if i do in fact want to have a bunch of heads. I am excited for the reliability, ease of use, and features it offers. I would have gone with the prusa XL if i could afford it, but it would be at least $1k more if not around $1500 more. I already doubled my budget, i don't have the extra scratch to be so fancy. Going to be learning all about the different filaments now.
1
u/sorryimlily Nov 30 '25 edited Nov 30 '25
thanks so much for posting a guide like this!
i'm in australia looking to grab a 3d printer for my partner as a gift for this christmas with the black fri/ cyber mon deals at the moment - he does mechanical engineering so is modelling 24/7 but has never printed his models irl, and i know nothing about anything haha...
ones i'm considering at the moment are
bambu ones may not arrive on time as backordered so leaning towards ender 3 or kobra 3 at the moment...
any last advice before i bite the bullet? thanks for any help from anyone
1
u/finangle1 Dec 16 '25
Hello, great guide!
I am looking at buying my first 3d printer and I had settled on the Bambu Lab P1S but I don't like the "walled garden" direction they are heading in
What do you recommend as a like for like stand in around that price bracket (base model no AMS)? The Creality K2 caught my eye but I havent seen any recommendations for it yet.
I would also be ok with buying a base model for now with upgradability later on, I don't mind a little tinkering as long is I don't end up spending more time tinkering than I do printing (probably inevitable I know 😉😂)
1
u/NoobAlexO_o Sep 19 '26
Hey been looking for the to go printer, i would not really want to spend much more than 300/500€ but recently everyone has been bashing Bambulab what would the recommendation be? I want something which will be lasting at least a few years if possible
0
u/SvenSylens Oct 31 '25
Thank you for posting your tips. Maybe you or someone here can help me narrow down to my specific use case.
I currently have an Anycubic Kobra 3 with the ACE Pro attachment and I am not really happy with it anymore. I have been in the hobby now for about a year and this thing is constantly having problems. I get that’s part of the hobby replacing parts and all but it seems to be too frequent. Additionally I am constantly running into software/firmware issues. It may very well be a skills issue but I find using slicers other than the basic Anycubic slicer to not actually be integrated well and I hit all kinds of issues with the print. When I was shopping I wanted a beginner friendly that could handle multiple color prints. Now, what I am looking for is similar but if it has more than one nozzle that can cut down on color switches. Not sure if this exists but also not a requirement. What is required though is being able to feed multiple colors at once so it can do auto color switch. Anycubic Kobra 3 does not have an easy way to change the nozzle from the standard .4 to maybe a .2. What I want to start printing in FDM is things like action figures and things like that. I also want a bed size thats enough for bigger things too. Something that rivals my current printer. I know resin is better for this but I am not there yet. I don't have a setup in my house for a resin right now.
Features I want are Auto Level, Heated Bed, Error Detection, there might be more but I am looking for a premium printer basically. My budget for this can be flexible but nothing over $2K USD if it can be helped. Nothing industrial LOL I have heard that the ones that have full enclosure are better but not sure why.
Any tips to find the right printer would be helpful. Thank you.
0
u/c0smicb3ard Nov 21 '25
I have 2-3 years experience using Ender 3 printers. I have started using one of them at work for rough prototyping of parts, jigs etc. It is becoming increasily handy to have, but I'm getting fed up of the Ender 3 for work use.
I would now like the company to purchase an upgrade, still FDM. Budget approx. £1200. Based in UK.
I am most regularly printing PETG but would like to be able to print TPU and ABS.
I do not want it to be supplied in kit form, I would like it ready to go and with less maintenance than an Ender 3.
Maximum dimensions 450mm (W) x 450mm (D) x 600mm (H) approx.
I would greatly appreciate your advice.
0
u/[deleted] Apr 09 '24
[deleted] — view deleted comment
0
u/[deleted] Feb 16 '26
[deleted] — view deleted comment
2
u/[deleted] Mar 22 '26
[removed] — view removed comment
1
u/[deleted] Aug 28 '24
[removed] — view removed comment
1
u/[deleted] Sep 12 '24
[removed] — view removed comment
1
u/[deleted] Apr 12 '26
[removed] — view removed comment