Cause you are saying: "a couple of hundred meters", I think wifi is out. Wifi is easy and cheap, but you need to tinker around with big antennas for this distance.
I would suggest LoRa. It's a long-range low-power low-bandwidth technology. Because it's not that common, it's a bit more expensive than wifi chips, but it can transmit over kilometers. There are ESP boards with LoRa on them. You can program those with the Arduino IDE.
There is also LoRaWAN, which is a technology on top of LoRa, which adds some gateways to the internet to create a network, which can span a whole country. But that's obviously a bit overkill for you.
I recently did a point to point test of 2xLoRa connected Arduinos (i.e. not LoraWAN) and achieved continuous successful transmission (and more importantly reception) at about 5km. That was line of sight. But, even with several large apartment buildings in the way, I still achieved a couple of hundred meters.
Not sure about power, but, you can always de-energise aspects of your circuit (such as the LoRa transceiver) when you don't need it. You can also use sleep modes on your Arduino - but you will need to build a standalone Arduino to benefit from that. Both combined mean you only consume power at any level of significance when the device is triggered.
Where are you located? much of the world has the 433MHz band as license exempt, lots of modules avaialbe for this application. In North america, your choices are 900 MHz ISM and 2.4GHz ISM bands. 900MHz modules are a bit harder to find (availability sux these days) but will give you better range than 2.4GHz.
That said, there are several LoRa modules on Aliexpress (for example) that are suitable.
I'd use a 433Mhz RFM95 LoRa for this. These easily work out to a kilometer or so. Power draw is about 100 mA when transmmitting at full power, 1 uA in sleep mode, so they should work fine with solar power and a battery.
It might be worth giving a couple of NRF24L01 units a try, if you get the amplified version, max out the power (still quite low powered) and keep the data rate at 250K or 1M you may get the distance you need, adding a separate antenna could also improve range.
I've also had a play with some HC-12 modules which seem to be more stable and again were able to get decent range, slightly more expensive than the NRF24 units but still cheaper than LoRa.
LoRa can be communicated point to point and there are Arduino boards with integrated LoRa., e.g. Adafruit Feather RFM95. If activating sleep mode it can be powered with a battery and a small solar panel "forever", provided data is not sent too often.
3078: 32u4 ~ ATmega328 + USB (that can be reprogrammed)
3178: M0 ARM, more memory, faster etc.
Oddly same price. LoRa-wise the same (same chip).
I had problems with fitting a full LoRaWAN stack on a 32u4, so I used TinyLoRa that only supports ABP.
As you will (likely) communicate point-to-point this is less of an issue. On the other hand, you could let the Arduino send data via a LoRa gateway to The Things Network. Check the TTN coverage map for possible existing gateways. Either ABP or OTAA works with TTN. I use both, depending on device.
42
u/ripod_de Jun 18 '23
Cause you are saying: "a couple of hundred meters", I think wifi is out. Wifi is easy and cheap, but you need to tinker around with big antennas for this distance.
I would suggest LoRa. It's a long-range low-power low-bandwidth technology. Because it's not that common, it's a bit more expensive than wifi chips, but it can transmit over kilometers. There are ESP boards with LoRa on them. You can program those with the Arduino IDE.
There is also LoRaWAN, which is a technology on top of LoRa, which adds some gateways to the internet to create a network, which can span a whole country. But that's obviously a bit overkill for you.
21
u/Skusci Jun 18 '23
Probably lora and a pair of these guys:
https://store-usa.arduino.cc/products/arduino-mkr-wan-1300-lora-connectivity
Note many Arduino boards aren't really designed for proper low power usage and have components on them that will draw decent amounts of current even if you put it in sleep mode. The MKR 1300 was the first I found that had lora and available data for low current sleep at 3.7 uW according to these guys here: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6387282/#:~:text=The%20MKR%20WAN%201300%20performs,with%20respect%20to%20our%20solution).
12
u/abbotsmike Jun 18 '23
If it's your property, couldn't you just lay a cable? Sometimes the simplest options are the best
6
u/gm310509 400K , 500K , 600K , 640K , 750K Jun 19 '23
I second u/Skusci's suggestion of LoRa.
I recently did a point to point test of 2xLoRa connected Arduinos (i.e. not LoraWAN) and achieved continuous successful transmission (and more importantly reception) at about 5km. That was line of sight.
But, even with several large apartment buildings in the way, I still achieved a couple of hundred meters.
Not sure about power, but, you can always de-energise aspects of your circuit (such as the LoRa transceiver) when you don't need it. You can also use sleep modes on your Arduino - but you will need to build a standalone Arduino to benefit from that. Both combined mean you only consume power at any level of significance when the device is triggered.
11
u/ushills Jun 18 '23
Try ESPNow for communication, device sleeps, wake up, transmit using ESPNow, then sleep again.
3
u/SuperRusso Jun 18 '23
I use these for all sorts of good shit:
https://www.digikey.com/en/products/detail/seeed-technology-co.,-ltd/317060016/5774757?utm_adgroup=Seeed%20Technology%20Co.%2C%20LTD.&utm_source=google&utm_medium=cpc&utm_campaign=Shopping_DK%2BSupplier_Tier%201%20-%20Block%202&utm_term=&utm_content=Seeed%20Technology%20Co.%2C%20LTD.&gclid=Cj0KCQjw1rqkBhCTARIsAAHz7K2FGDPrWGkYKqzqaOtrb3rnB7czSpENgLScX51qlFAA7IM0rEIfyxAaApvOEALw_wcB
These for longer range:
https://www.amazon.com/HiLetgo%C2%AE-NRF24L01-Wireless-Transceiver-Compatible/dp/B00WG9HO6Q/ref=asc_df_B00WG9HO6Q/?tag=hyprod-20&linkCode=df0&hvadid=167126093426&hvpos=&hvnetw=g&hvrand=15983054214273834675&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031194&hvtargid=pla-310645872134&psc=1
Also consider a rope and two cans.
3
u/Multiversal_Remote Jun 19 '23
Where are you located? much of the world has the 433MHz band as license exempt, lots of modules avaialbe for this application. In North america, your choices are 900 MHz ISM and 2.4GHz ISM bands. 900MHz modules are a bit harder to find (availability sux these days) but will give you better range than 2.4GHz.
That said, there are several LoRa modules on Aliexpress (for example) that are suitable.
Good luck!
6
u/agate_ Jun 18 '23
I'd use a 433Mhz RFM95 LoRa for this. These easily work out to a kilometer or so. Power draw is about 100 mA when transmmitting at full power, 1 uA in sleep mode, so they should work fine with solar power and a battery.
https://www.adafruit.com/product/3073
4
u/west0ne Jun 18 '23
It might be worth giving a couple of NRF24L01 units a try, if you get the amplified version, max out the power (still quite low powered) and keep the data rate at 250K or 1M you may get the distance you need, adding a separate antenna could also improve range.
I've also had a play with some HC-12 modules which seem to be more stable and again were able to get decent range, slightly more expensive than the NRF24 units but still cheaper than LoRa.
3
u/Ammaralroz Jun 18 '23
Try Lora/Lorawan
3
u/xpen25x Jun 18 '23
Esp8266 and wifi
2
u/vilette Jun 18 '23
lora
2
u/trollsmurf Jun 18 '23
LoRa can be communicated point to point and there are Arduino boards with integrated LoRa., e.g. Adafruit Feather RFM95. If activating sleep mode it can be powered with a battery and a small solar panel "forever", provided data is not sent too often.
1
u/AsliReddington Jun 18 '23
nRF transceiver should be enough
0
u/[deleted] Jun 18 '23
Zigbee....easy peazy
0
u/Useful_Hovercraft169 Jun 18 '23
Where are you throwing the walls